E-Series I/Q Demodulator 90 MHz EKIN2-90D V3.00 SM-28 Features ● ● ● Excellent Phase and Amplitude Balance LO Power: +10 dBm Typical Surface Mount Specifications @ 25°C Frequency Range LO / RF I/Q 90 MHz DC - 0.5 MHz Amplitude Unbalance Typical 0.2 dB Maximum 0.5 dB Phase Unbalance Typical 1° Maximum 2° Isolation LO to RF Typical 55 dB Minimum 40 dB Conversion Loss Typical 6 dB Maximum 9 dB Typical 17 dBm Minimum 15 dBm (LO) Carrier Power +10 dBm Input IP31 1. Input IP3 Test Conditions RF1: 90.4 MHz @ -10 dBm RF2: 90.5 MHz @ -10 dBm LO: 90 MHz @ +10 dBm Dimensions in ( ) are in mm. Unless Otherwise Noted: .x = ±0.04 (1.00) .xx = ±0.02 (0.50) .xxx = ±0.010 (0.250) Pin Configuration Operating Characteristics Operating Temp. -10°C to +70°C Function Pin. No. Storage Temp. -40°C to +85°C LO 1 50 Ohms Nominal RF 8 3 dBm Maximum I 5 Impedance RF Power (1dB Compression) Ordering Information Part No. EKIN2-90D EKIN2-90DTR Q 6 Case Ground 2,3,4,7 Packaging Tube Forward Tape & Reel S 1091 A Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020