GS09AC-FRC POWER SUPPLY MODULE FOR STB REV. 01 Type GS09AC-FRC Vi 180<Vac<264 Vrms Vo Po 2.5V 0.75A 3.3V 0.3A 5V 0.4A 7.3V 0.5A 12V 50mA 33 10mA FEATURE ■ OPEN FRAME AC/DC SWITCHING MODE POWER SUPPLY FOR SET TOP BOX APPLICATION ■ LINE VOLTAGE EUROPEAN STANDARD 230 Vac ■ ■ ■ ■ ■ ■ ■ ■ 6 INSULATED MAIN OUTPUTS, MAX 10W PEAK INPUT OVERVOLTAGE WITH STANDING INPUT FUSE RESISTOR ON ACMAIN INPUT INPUTS TO OUTPUTS INSULATION DESIGNED TO COMPLY WITH EN60950 E EN60065 SAFETY REQUIREMENTS INPUT FILTER TO MEET EMC REQUIREMENTS ACCORDING TO EN55022 CLASS B EEFICIENCY>70% MECHANICAL DIMENSIONS (LxWxH):130x50x30 mm October 2003 ORDERING NUMBER: GS09AC-FRC DESCRIPTION The GS09AC-FRC Switching Mode Power Supply is a comprehensive solution, performing AC-DC convertion and regulation functions. Designed for a variety of residential user applications, this open frame solution performs up to 10W output power. Connected to the main via J1 2 poles AC connector, the GS09AC-FRC performs a high efficiency AC/DC convertion to generate 6 regulated DC outputs available at the J2 DC 10 poles connector. 1/5 GS09AC-FRC ELECTRICAL CHARACTERISTICS when in NPM (Tamb=25)C, unless otherwise specified.) Standard Condition: Vac=85 to 254 Vrms Symbol Vac Test Condition AC Input Voltage Min. Typ. Max. Unit 180 264 Vrms 50 60 Hz 180 Vrms fi Vac Input Frequency Vac=230 Vrms Vacst Start up Input voltage Output parameters as per Standard Condition Vo1 Output Voltage 1 Standard condition 2.375 2.5 2.623 V Vo2 Output Voltage 2 Standard condition 3.135 3.3 3.465 V Vo3 Output Voltage 3 Standard condition 4.75 5 5.25 V Vo4 Output Voltage 4 Standard condition 6.57 7.3 8.03 V Vo5 Output Voltage 5 Standard condition 11.4 12 12.6 V Vo6 Output Voltage 6 Standard condition 29.7 33 36.3 V Io1 Output Current Vo1 Standard condition 510 750 mA Io2 Output Current Vo2 Standard condition 200 300 mA Io3 Output Current Vo3 Standard condition 200 400 mA Io4 Output Current Vo4 Standard condition 360 500 mA Io5 Output Current Vo5 Standard condition 25 50 mA Io6 Output Current Vo6 Standard condition 6 10 mA Vor1 Output Voltage Vo1 Ripple Standard Condition 10 mVrms Vor2 Output Voltage Vo2 Ripple Standard Condition 10 mVrms Vor3 Output Voltage Vo3 Ripple Standard Condition 10 mVrms Vor4 Output Voltage Vo4 Ripple Standard Condition 10 mVrms Vis Insulation Voltage Input Vac to outputs t=60s as per EN60950 th Hold-up time Mean Time Before Failure MTBF 2/5 Parameter Top Oper. Ambient Temperature Irsh In rush current 3000 Vrms Vac=180 20 ms Ground Fixed, MIL-HDBK-217E 50 Kh -5 +65 15 º C A GS09AC-FRC ADSL PowerSupply Module SIDE VIEW (dimensions in mm) ADSL Power Supply Module TOP VIEW (dimensions in mm) 3/5 GS09AC-FRC Input connector: KUNMING HJC-034 PIN CONFIGURATION Pin No Signal Pin No Signal 1 33V 6 GND 2 12V 7 GND 3 7.3V 8 3.3V 4 5V 9 2.5V 5 GND 10 2.5V 4/5 GS09AC-FRC Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2003 STMicroelectronics - All rights reserved STMicroelectronics GROUP OF COMPANIES Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 5/5