AD AD8682ARMZ-R2

Dual/Quad Low Power, High Speed
JFET Operational Amplifiers
AD8682/AD8684
APPLICATIONS
Portable telecommunication
Low power industrial and instrumentation
Loop filters
Active and precision filters
Integrators
Strain gauge amplifiers
Portable medical instrumentation
Supply current monitoring
PIN CONFIGURATIONS
OUT A 1
8
V+
–IN A 2
AD8682
7
OUT B
+IN A 3
TOP VIEW
(Not to Scale)
6
–IN B
5
+IN B
V– 4
06278-001
Low supply current: 250 μA/amp maximum
High slew rate: 9 V/μs
Bandwidth: 3.5 MHz typical
Low offset voltage: 1 mV maximum @ 25°C
Low input bias current: 20 pA maximum @ 25°C
CMRR: 90 dB typical
Fast settling time
Unity gain stable
Figure 1. 8-Lead SOIC_N and 8-Lead MSOP
14 OUT D
OUT A 1
13 –IN D
–IN A 2
12 +IN D
+IN A 3
V+ 4
AD8684
11 V–
+IN B 5
10 +IN C
–IN B 6
9
–IN C
OUT B 7
8
OUT C
TOP VIEW
(Not to Scale)
06278-002
FEATURES
Figure 2. 14-Lead SOIC_N and 14-Lead TSSOP
GENERAL DESCRIPTION
The AD8682 and AD8684 are dual and quad low power, precision
(1 mV) JFET amplifiers featuring excellent speed at low supply
currents. The slew rate is typically 9 V/μs with a supply current
under 250 μA per amplifier. These unity-gain stable amplifiers
have a typical gain bandwidth of 3.5 MHz. The JFET input stage
ensures bias current is typically a few picoamps and below 125 pA
maximum over the full temperature operating range.
The devices are ideal for portable, low power applications,
especially with high source impedance. The devices are unity gain
stable and can drive higher capacity loads (G = 1, noninverting),
as an example of their excellent dynamic response over a wide
range of conditions, delivering dc precision performance at low
quiescent currents.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2006 Analog Devices, Inc. All rights reserved.
AD8682/AD8684
TABLE OF CONTENTS
Features .............................................................................................. 1
ESD Caution...................................................................................4
Applications....................................................................................... 1
Typical Performance Characteristic................................................5
Pin Configurations ........................................................................... 1
Applications Information .............................................................. 10
General Description ......................................................................... 1
High-Side Signal Conditioning ................................................ 10
Revision History ............................................................................... 2
Phase Inversion........................................................................... 10
Specifications..................................................................................... 3
Active Filters ............................................................................... 10
Electrical Characteristics............................................................. 3
Programmable State Variable Filter ......................................... 11
Absolute Maximum Ratings............................................................ 4
Outline Dimensions ....................................................................... 12
Thermal Resistance ...................................................................... 4
Ordering Guide .......................................................................... 13
REVISION HISTORY
10/06—Revision 0: Initial Version
Rev. 0 | Page 2 of 16
AD8682/AD8684
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
VS = ±15.0 V, TA = 25°C, VCM = 0 V, unless otherwise noted.
Table 1.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Conditions
Min
VOS
Typ
Max
Unit
0.35
1
2.5
3.5
3
4
20
125
20
100
+15
mV
mV
mV
mV
mV
pA
pA
pA
pA
V
dB
V/mV
V/mV
μV/°C
pA/°C
AD8682: +25°C ≤ TA ≤ +85°C
AD8684: +25°C ≤ TA ≤ +85°C
AD8682: −40°C ≤ TA ≤ +25°C
AD8684: −40°C ≤ TA ≤ +25°C
Input Bias Current
IB
6
−40°C ≤ TA ≤ +85°C
Input Offset Current
IOS
−40°C ≤ TA ≤ +85°C
Input Voltage Range
Common-Mode Rejection Ratio
Large Signal Voltage Gain
Offset Voltage Drift
Bias Current Drift
OUTPUT CHARACTERISTICS
Output Voltage High
Output Voltage Low
Short-Circuit Limit
Open-Loop Output Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current/Amplifier
Supply Voltage Range
DYNAMIC PERFORMANCE
Slew Rate
Full-Power Bandwidth
Settling Time
Gain Bandwidth Product
Phase Margin
NOISE PERFORMANCE
Voltage Noise
Voltage Noise Density
Current Noise Density
CMRR
AVO
−11 V ≤ VCM ≤ +15 V, −40°C ≤ TA ≤ +85°C
RL = 10 kΩ
RL = 10 kΩ, −40°C ≤ TA ≤ +85°C
−11
70
20
15
ΔVOS/ΔT
ΔIB/ΔT
VOH
VOL
ISC
ZOUT
90
10
8
RL = 10 kΩ
RL = 10 kΩ
Source
Sink
f = 1 MHz
PSRR
ISY
VS
VS = ±4.5 V to ±18 V, −40°C ≤ TA ≤ +85°C
VO = 0 V, −40°C ≤ TA ≤ +85°C
SR
BWP
tS
GBP
ØO
RL = 10 kΩ
1% distortion
To 0.01%
en p-p
en
in
0.1 Hz to 10 Hz
f = 1 kHz
+13.5
3
92
+13.9
−13.9
10
−12
200
114
210
±4.5
Rev. 0 | Page 3 of 16
7
−13.5
−8
250
±18
V
V
mA
mA
Ω
dB
μA
V
9
125
1.6
3.5
55
V/μs
kHz
μs
MHz
Degrees
1.3
36
0.01
μV p-p
nV/√Hz
pA/√Hz
AD8682/AD8684
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
Supply Voltage
Input Voltage
Differential Input Voltage1
Output Short-Circuit Duration
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature (Soldering, 60 sec)
1
Rating
±18 V
±18 V
36 V
Indefinite
−65°C to +150°C
−40°C to +85°C
−65°C to +150°C
300°C
For supply voltages less than ±18 V, the absolute maximum input voltage is
equal to the supply voltage.
THERMAL RESISTANCE
Table 3.
Package Type
8-Lead MSOP [RM-8]
8-Lead SOIC_N [R-8]
14-Lead TSSOP [RU-14]
14-Lead SOIC [R-14]
ESD CAUTION
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Rev. 0 | Page 4 of 16
θJA
210
158
180
120
θJC
45
43
35
36
Unit
°C/W
°C/W
°C/W
°C/W
AD8682/AD8684
TYPICAL PERFORMANCE CHARACTERISTIC
180
70
40
90
20
45
0
0
50
CLOSED-LOOP GAIN (dB)
135
–45
–20
VS = ±15V
TA = 25°C
60
PHASE (Degree)
VS = ±15V
TA = 25°C
60
40
30
AVCL = 100
AVCL = 10
20
10
0
AVCL = 1
–10
100k
FREQUENCY (Hz)
1M
06278-003
10k
–90
10M
–30
1k
10k
Figure 3. AD8682 Open-Loop Gain and Phase vs. Frequency
100k
FREQUENCY (Hz)
10M
Figure 6. AD8682 Closed-Loop Gain vs. Frequency
30
45
VS = ±15V
RL = 10kΩ
40
VS = ±15V
RL = 10kΩ
CL = 50pF
25
–SR
35
30
SLEW RATE (V/µs)
OPEN-LOOP GAIN (V/mV)
1M
06278-006
–20
–40
1k
25
20
15
20
15
10
+SR
10
5
–50
–25
0
25
50
75
100
125
TEMPERATURE (°C)
0
–75
06278-004
0
–75
–50
0
25
50
75
100
125
100
125
TEMPERATURE (°C)
Figure 7. Slew Rate vs. Temperature
Figure 4. AD8682 Open-Loop Gain vs. Temperature
1000
80
INPUT BIAS CURRENT (pA)
VS = ±15V
RL = 2kΩ
70 V = 100mV p-p
IN
AVCL = 1
60 TA = 25°C
+OS
50
–OS
40
–25
06278-007
5
30
20
VS = ±15V
VCM = 0V
100
10
1
0
0
100
200
300
400
LOAD CAPACITANCE (pF)
500
0.1
–75
–50
–25
0
25
50
75
TEMPERATURE (°C)
Figure 8. AD8682 Input Bias Current vs. Temperature
Figure 5. Small Signal Overshoot vs. Load Capacitance
Rev. 0 | Page 5 of 16
06278-008
10
06278-005
OVERSHOOT (%)
OPEN-LOOP GAIN (dB)
80
AD8682/AD8684
20
VS = ±15V
TA = 25°C
TA = 25°C
RL = 10kΩ
15
OUTPUT VOLTAGE SWING (V)
VOLTAGE NOISE DENSITY (nV/√Hz)
1000
100
10
VOH
10
5
0
–5
–10
VOL
100
1k
FREQUENCY (Hz)
10k
–20
06278-009
1
10
0
±20
Figure 12. Output Voltage Swing vs. Supply Voltage
1000
VS = ±15V
TA = 25°C
100
VS = ±15V
TA = 25°C
100
OUTPUT IMPEDANCE (Ω)
INPUT BIAS CURRENT (pA)
±15
±10
SUPPLY VOLTAGE (V)
Figure 9. Voltage Noise Density vs. Frequency
1000
±5
06278-012
–15
10
1
AVCL = 100
10
AVCL = 10
1
–10
–5
0
5
10
15
COMMON-MODE VOLTAGE (V)
0.1
100
06278-010
0.1
–15
Figure 10. Input Bias Current vs. Common-Mode Voltage
480
100k
1M
480
TA = 25°C
SUPPLY CURRENT (µA)
475
470
465
460
455
470
465
460
0
±5
±10
±15
SUPPLY VOLTAGE (V)
±20
Figure 11. AD8682 Supply Current vs. Supply Voltage
450
–50
–25
0
25
50
75
100
TEMPERATURE (°C)
Figure 14. AD8682 Supply Current vs. Temperature
Rev. 0 | Page 6 of 16
125
06278-014
455
06278-011
SUPPLY CURRENT (µA)
10k
FREQUENCY (Hz)
Figure 13. Closed-Loop Output Impedance vs. Frequency
475
450
1k
06278-013
AVCL = 1
AD8682/AD8684
MAXIMUM OUTPUT SWING (V p-p)
VOL
12
10
VOH
8
6
4
0
100
1k
LOAD RESISTANCE (Ω)
10k
25
20
15
10
5
0
100
06278-015
2
Figure 15. Absolute Output Voltage vs. Load Resistance
10k
FREQUENCY (Hz)
100k
1M
140
VS = ±15V
120 TA = 25°C
VS = ±15V
TA = 25°C
120
100
100
+PSRR
80
80
CMRR (dB)
60
40
20
–PSRR
60
40
20
0
0
–20
–20
–40
–40
–60
100
1k
10k
100k
FREQUENCY (Hz)
–60
100
06278-016
1M
VS = ±15V
TA = 25°C
100 ×AD8682
(200 OP AMPS)
18
16
SINK
10
1M
20
VS = ±15V
TA = 25°C
12
10k
100k
FREQUENCY (Hz)
Figure 19. AD8682 CMRR vs. Frequency
Figure 16. AD8682 PSRR vs. Frequency
14
1k
14
12
UNITS
8
SOURCE
6
10
8
6
4
4
2
2
–25
0
25
50
75
100
TEMPERATURE (°C)
125
06278-017
0
–50
0
–1.0 –0.8 –0.6
–0.4 –0.2
0
0.2
VOS (µV)
0.4
0.6
Figure 20. AD8682 VOS Distribution
Figure 17. AD8682 Short-Circuit Current vs. Temperature
Rev. 0 | Page 7 of 16
0.8
1.0
06278-020
PSRR (dB)
1k
Figure 18. Maximum Output Swing vs. Frequency
140
SHORT-CIRCUIT CURRENT (mA)
VS = ±15V
TA = 25°C
RL = 10kΩ
AVCL = 1
06278-018
14
ABSOLUTE OUTPUT VOLTAGE (V)
30
VS = ±15V
TA = 25°C
06278-019
16
AD8682/AD8684
1000
400
VS = ±15V
300 × OP282
(600 OP AMPS)
360
INPUT BIAS CURRENT (pA)
320
280
UNITS
240
200
160
120
80
100
10
1
0
4
8
12
16
20
24
28
32
36
TCVOS (µV/°C)
0.1
–75
06278-021
0
–50
–25
0
25
50
75
100
125
TEMPERATURE (°C)
Figure 21. AD8682 TCVOS Distribution SOIC_N Package
06278-024
40
Figure 24. AD8684 Input Bias Current vs. Temperature
50
950
45
945
SUPPLY CURRENT (µA)
35
30
25
20
15
10
940
935
930
925
920
915
5
–25
0
25
50
75
100
125
TEMPERATURE (°C)
910
06278-022
0
–50
20
30
40
Figure 25. AD8684 Relative Supply Current vs. Supply Voltage
950
VS = ±15V
TA = 25°C
50
10
SUPPLY VOLTAGE (V)
Figure 22. AD8684 Open-Loop Gain vs. Temperature
60
0
06278-025
OPEN-LOOP GAIN (V/mV)
40
945
SUPPLY CURRENT (µA)
40
30
AVCL = 10
20
10
AVCL = 1
0
935
930
925
920
1k
10k
100k
1M
10M
FREQUENCY (Hz)
100M
Figure 23. AD8684 Closed-Loop Gain vs. Frequency
910
–50
–25
0
25
50
75
100
TEMPERATURE (°C)
Figure 26. AD8684 Supply Current vs. Temperature
Rev. 0 | Page 8 of 16
125
06278-026
–20
940
915
–10
06278-023
CLOSED-LOOP GAIN (dB)
AVCL = 100
AD8682/AD8684
140
40
VS = ±15V
TA = 25°C
100 × AD8684
(400 OP AMPS)
VS = ±15V
35
120
30
100
25
UNITS
PSRR–
60
20
15
40
10
20
10k
100k
1M
10M
FREQUENCY (Hz)
0
–1.0
06278-027
0
1k
0.2
0.4
0.6
0.8
1.0
Figure 30. AD8684 VOS Distribution Package
14
800
12
700
VS = ±15V
300 × OP282
(1200 OP AMPS)
SINK
600
10
SOURCE
500
8
UNITS
SHORT-CIRCUIT CURRENT (mA)
0
VOS (µV)
Figure 27. AD8684 PSRR vs. Frequency
6
400
300
4
200
2
–25
0
25
50
75
100
125
TEMPERATURE (°C)
06278-028
100
0
–50
Figure 28. AD8684 Short-Circuit Current vs. Temperature
VS = ±15V
120
100
80
60
40
10k
100k
1M
FREQUENCY (Hz)
10M
06278-029
20
0
1k
0
0
4
8
12 16 20 24 28 32 36 40 44 48 52 56 60
TCVOS (µV/°C)
Figure 31. AD8684 TCVOS Distribution Package
140
CMRR (dB)
–0.8 –0.6 –0.4 –0.2
06278-030
5
Figure 29. AD8684 CMRR vs. Frequency
Rev. 0 | Page 9 of 16
06278-031
PSRR (dB)
PSRR+
80
AD8682/AD8684
APPLICATIONS INFORMATION
The AD8682 and AD8684 are dual and quad JFET op amps that
are optimized for high speed at low power. This combination
makes these amplifiers excellent choices for battery-powered or
low power applications that require above average performance.
Applications benefiting from this performance combination
include telecommunications, geophysical exploration, portable
medical equipment, and navigational instrumentation.
HIGH-SIDE SIGNAL CONDITIONING
There are many applications requiring the sensing of signals near
the positive rail. The AD8682 and the AD8684 were tested and
are guaranteed over a common-mode range (−11 V ≤ VCM ≤
+15 V) that includes the positive supply.
PHASE INVERSION
Most JFET input amplifiers invert the phase of the input signal
if either input exceeds the input common-mode range. For the
AD8682/AD8684, negative signals in excess of approximately
14 V cause phase inversion. This is caused by saturation of the
input stage leading to the forward-biasing of a drain-gate diode.
A simple fix for this in noninverting applications is to place
a resistor in series with the noninverting input. This limits the
amount of current through the forward-biased diode and prevents
shutting down of the output stage. For the AD8682/AD8684,
a value of 200 kΩ has been found to work; however, it adds
a significant amount of noise.
15
The AD8682/AD8684 are commonly used in the sensing of
power supply currents and in current sensing applications, such
as the partial circuit shown in Figure 32. In this circuit, the
voltage drop across a low value resistor, such as the 0.1 Ω shown
here, is amplified and compared to 7.5 V. The output can then
be used for current limiting.
10
VOUT
5
0.1Ω
15V
500kΩ
–5
RL
100kΩ
0
100kΩ
–15
–15
06278-042
500kΩ
–10
–5
0
VIN
5
10
15
06278-043
–10
1/2
AD8682
Figure 33. AD8682 Phase Reversal
Figure 32. High-Side Signal Conditioning
ACTIVE FILTERS
The wide bandwidth and high slew rates of the AD8682/AD8684
make either one an excellent choice for many filter applications.
There are many active filter configurations, but the four most
popular configurations are: Butterworth, elliptical, Bessel, and
Chebyshev. Each type has a response that is optimized for a
given characteristic, as shown in Table 4.
Table 4.
Type
Butterworth
Chebyshev
Elliptical
Bessel (Thompson)
Selectivity
Moderate
Good
Best
Poor
Overshoot
Good
Moderate
Poor
Best
Phase
Nonlinear
Amplitude (Pass Band)
Maximum flat
Equal ripple
Equal ripple
Linear
Rev. 0 | Page 10 of 16
Amplitude (Stop Band)
Equal ripple
AD8682/AD8684
PROGRAMMABLE STATE VARIABLE FILTER
The circuit shown in Figure 34 can be used to accurately program
the Q; the cutoff frequency, fC; and the gain of a 2-pole state
variable filter. The AD8684 has been used in this design because
of its high bandwidth, low power, and low noise. This circuit takes
only three packages to build because of the quad configuration
of the op amps and DACs.
The DACs shown are used in voltage mode; therefore, many
values are dependent on the accuracy of the DAC only and not
on the absolute values of the DAC resistive ladders. As a result, this
makes the circuit unusually accurate for a programmable filter.
Adjusting DAC 1 changes the signal amplitude across R1; therefore,
the DAC attenuation × R1 determines the amount of signal current
that charges the integrating capacitor, C1.
This cutoff frequency can be expressed as
fc =
1 ⎛ D1 ⎞
⎜
⎟
2πR1C1 ⎝ 256 ⎠
where D1 is the digital code for the DAC.
The gain of this circuit is set by adjusting D3. The gain equation is
Gain =
R4 ⎛ D3 ⎞
⎜
⎟
R5 ⎝ 256 ⎠
DAC 2 is used to set the Q of the circuit. Adjusting this DAC
controls the amount of feedback from the band-pass node to
the input summing node. Note that the digital value of the
DAC is in the numerator; therefore, zero code is not a valid
operating point.
Q=
R2 ⎛ 256 ⎞
⎜
⎟
R3 ⎝ D2 ⎠
R7
2kΩ
R4
2kΩ
1/4
DAC8408
1/4
AD8684
R5
2kΩ
C1
1000pF
1/4
AD8684
1/4
DAC8408
1/4
AD8684
R1
2kΩ
C1
1000pF
1/4
AD8684
1/4
DAC8408
HIGH PASS
R6
2kΩ
1/4
AD8684
R1
2kΩ
1/4
AD8684
LOW
PASS
BAND PASS
R3
2kΩ
R2
2kΩ
1/4
AD8684
1/4
AD8684
1/4
DAC8408
06278-044
VIN
Figure 34. Programmable State Variable Filter
Rev. 0 | Page 11 of 16
AD8682/AD8684
OUTLINE DIMENSIONS
5.00 (0.1968)
4.80 (0.1890)
5
1
4
1.27 (0.0500)
BSC
0.25 (0.0098)
0.10 (0.0040)
6.20 (0.2440)
5.80 (0.2284)
1.75 (0.0688)
1.35 (0.0532)
0.51 (0.0201)
0.31 (0.0122)
COPLANARITY
0.10
SEATING
PLANE
0.50 (0.0196)
0.25 (0.0099)
8°
0°
0.25 (0.0098)
0.17 (0.0067)
1.27 (0.0500)
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-012-A A
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 35. 8-Lead Standard Small Outline Package [SOIC_N]
Narrow Body
(R-8)
Dimensions shown in millimeters and (inches)
3.20
3.00
2.80
8
3.20
3.00
2.80
1
5
5.15
4.90
4.65
4
PIN 1
0.65 BSC
0.95
0.85
0.75
1.10 MAX
0.15
0.00
0.38
0.22
COPLANARITY
0.10
45°
0.23
0.08
8°
0°
SEATING
PLANE
COMPLIANT TO JEDEC STANDARDS MO-187-AA
Figure 36. 8-Lead Mini Small Outline Package [MSOP]
(RM-8)
Dimensions shown in millimeters
Rev. 0 | Page 12 of 16
0.80
0.60
0.40
060506-A
8
4.00 (0.1574)
3.80 (0.1497)
AD8682/AD8684
8.75 (0.3445)
8.55 (0.3366)
4.00 (0.1575)
3.80 (0.1496)
8
14
1
7
1.27 (0.0500)
BSC
0.50 (0.0197)
0.25 (0.0098)
1.75 (0.0689)
1.35 (0.0531)
0.25 (0.0098)
0.10 (0.0039)
COPLANARITY
0.10
6.20 (0.2441)
5.80 (0.2283)
SEATING
PLANE
0.51 (0.0201)
0.31 (0.0122)
45°
8°
0°
0.25 (0.0098)
0.17 (0.0067)
1.27 (0.0500)
0.40 (0.0157)
060606-A
COMPLIANT TO JEDEC STANDARDS MS-012-AB
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 37. 14-Lead Standard Small Outline Package [SOIC_N]
Narrow Body
(R-14)
Dimensions shown in millimeters and (inches)
5.10
5.00
4.90
14
8
4.50
4.40
4.30
6.40
BSC
1
7
PIN 1
1.05
1.00
0.80
0.65
BSC
1.20
MAX
0.15
0.05
0.30
0.19
0.20
0.09
SEATING
COPLANARITY
PLANE
0.10
8°
0°
0.75
0.60
0.45
COMPLIANT TO JEDEC STANDARDS MO-153-AB-1
Figure 38. 14-Lead Thin Shrink Small Outline Package [TSSOP]
(RU-14)
Dimensions shown in millimeters
ORDERING GUIDE
Model
AD8682ARZ 1
AD8682ARZ-REEL1
AD8682ARZ-REEL71
AD8682ARMZ-R21
AD8682ARMZ-REEL1
AD8684ARZ1
AD8684ARZ-REEL1
AD8684ARZ-REEL71
AD8684ARUZ1
AD8684ARUZ_REEL1
1
Temperature Range
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
Package Description
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead MSOP
8-Lead MSOP
14-Lead SOIC_N
14-Lead SOIC_N
14-Lead SOIC_N
14-Lead TSSOP
14-Lead TSSOP
Z= Pb-free part.
Rev. 0 | Page 13 of 16
Package Option
R-8
R-8
R-8
RM-8
RM-8
R-14
R-14
R-14
RU-14
RU-14
Branding
A1K
A1K
AD8682/AD8684
NOTES
Rev. 0 | Page 14 of 16
AD8682/AD8684
NOTES
Rev. 0 | Page 15 of 16
AD8682/AD8684
NOTES
©2006 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D06278-0-10/06(0)
Rev. 0 | Page 16 of 16