ASEMI KBPC5006

KBPC50005 thru KBPC5010
50.0 A Single-Phase Silicon Bridge Rectifier
Rectifier Reverse Voltage 50 to 1000V
16.2 + 0.5
Hole for
# 10 Screw
5.35 + 0.25DIA.
Features
This series is UL listed under the Recognized
Component Index, file number E142814
The plastic material used carries Underwriters
Laboratory flammability recognition 94V-0
Universal 4-way terminals, snap-on, wrap-around,
solder or P.C. Board mounting
Surge overload ratings to 400 amperes
Electrically isolated metal case for maximum
heat dissipation
Case to terminal isolation voltage 2500V
0.78
28.55 + 0.25
16.2 + 0.5
18.1 + 0.5
14.3 + 0.5
28.55 + 0.25
6.35
Mechanical Data
Case: Metal case
Terminals: Plated .25"(6.35mm) Faston
Weight: 1.116 ounce, 31.6 grams (approx)
Mounting Position: Bolt down with silicone thermal
compound between bridge and mounting
surface for maximum heat transfer efficiency
Mounting Torque: 20 in-lb max.
24.1 + 1.3
11.10 +0.13
Dimensions in millimeters (1mm=0.0394")
Maximum Ratings & Thermal Characteristics
Rating at 25 C ambient temperature unless otherwise specified, Resistive or Inductive load, 60 Hz.
For Capacitive load derate current by 20%.
Parameter
KBPC KBPC KBPC
Symbol 50005 5001 5002
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS bridge input voltage
VRMS
35
70
140
280
420
560
700
V
VDC
50
100
200
400
600
800
1000
V
Maximum DC blocking voltage
KBPC KBPC KBPC
5004 5006 5008
KBPC
5010 unit
Maximum average forward rectified
output current at TA=40 C
IF(AV)
50
A
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
IFSM
400
A
I t
664
A2 sec
Typical thermal resistance per element (1)
ReJA
2.5
Operating junction and storage temperature
range
TJ,
TSTG
Rating for fusing ( t<8.3ms)
2
C/W
-55 to + 150
Electrical Characteristics
Rating at 25 C ambient temperature unless otherwise specified. Resistive or Inductive load, 60Hz.
For Capacitive load derate by 20 %.
Parameter
KBPC KBPC KBPC KBPC KBPC KBPC KBPC
Symbol 50005 5001 5002 5004 5006 5008 5010 Unit
Maximum instantaneous forward voltage drop
per leg at 25.0A
VF
1.0
V
Maximum DC reverse current at rated TA =25 C
DC blocking voltage per element
TA =125 C
IR
10
500
A
Notes: (1)Thermal resistance from Junction to Ambemt on P.C.board mounting.
www.asemi.tw
o
Rating and Characteristic Curves ( TA=25 C Unless otherwise noted )
KBPC50005 thru KBPC5010
Fig. 2 Maximum Non-repetitive Peak
Forward Surge Current
Fig. 1 Derating Curve for
Output Rectified Current
Peak Forward Surge Current,
Amperes
50
Average Forward Output
Current, Amperes
40
30
20
60Hz Resistive or
Inductive Load
10
0
400
8.3ms
Single half-sine-Wave
[JEDEC Method]
300
200
100
40
10
1
100
Number of Cycles at 60HZ
0
50
100
150
o
Case Temperature, C
Fig. 4 Typical Reverse
Characteristics at Tj=25 oC
Fig. 3 Typical Instantaneous
Forward Characteristics
10
Instantaneous Reverse
Current ,Amperes
Instantaneous Forward Current,
Amperes
100
10
1.0
Tj=100 C
1.0
0.1
Tj=25 C
Pulse Width=300us
2% duty cycle
0.1
Tj=25 C
.01
.01
0.4
0.6
0.8
1.0
1.2
Instantaneous Forward
Voltage, Volts
www.asemi.tw
1.4
1.6
0
20
40
60
80
100
Percent of Rated Peak Reverse
Voltage, %
120
140