KBPC6005 thru KBPC610 6.0 A Single-Phase Silicon Bridge Rectifier Rectifier Reverse Voltage 50 to 1000V 10.8 + 0.5 Features 3.8 + 0.2 DIA. This series is UL listed under the Recognized Component Index, file number E142814 High temperature metallurgically bonded internal rectifiers Typical IR less than .1 A The plastic material used carries Underwriters Laboratory flammability recognition 94V-0 High temperature soldering guaranteed 265 /10 seconds at 5 lbs (2.3kg) tension 15.24 + 0.51 2.2 + 0.5 2.2 + 0.5 1.02 Typical 19.0 MIN Mechanical Data Case: Voil-free plastic package Terminals: Plated leads solderable per MIL-STD-202, Method 208 Mounting: Thru hole for #6 screw Mounting position: Any Weight: 3.8 grams (approx) 6.35 + 0.51 15.24 + 0.51 Dimensions in millimeters(1mm =0.0394＂） Maximum Ratings & Thermal Characteristics Rating at 25 C ambient temperature unless otherwise specified, Resistive or Inductive load, 60 Hz. For Capacitive load derate current by 20%. KBPC KBPC KBPC KBPC KBPC KBPC unit Parameter Symbol KBPC 6005 601 602 604 606 608 610 VRRM 600 50 100 200 400 800 1000 V Maximum repetitive peak reverse voltage Maximum RMS bridge input voltage Maximum DC blocking voltage Maximum average forward rectified output current Tc = 75 (1) Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Rating for fusing ( t<8.3ms) Typical thermal resistance per element (2) Typical junction capacitance per element(3) Operating junction and storage temperature range VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V IF(AV) 6.0 A IFSM 125 A I t 10 A sec ReJA 9.4 C/W 55 pF 2 Cj TJ, TSTG 2 -55 to + 150 Electrical Characteristics Rating at 25 C ambient temperature unless otherwise specified. Resistive or Inductive load, 60Hz. For Capacitive load derate by 20 %. KBPC KBPC KBPC KBPC KBPC KBPC KBPC Parameter Symbol 6005 601 602 604 606 608 610 Unit Maximum instantaneous forward voltage drop per leg at 3.0A VF 1.1 V Maximum DC reverse current at rated TA =25 C DC blocking voltage per element TA =100 C IR 10 1000 A Notes: (1)Mounted on metal chassis. (2)Non-repetitive, for t>1ms and < 8.3ms. (3)Measured at 1.0MHz and applied reverse voltage of 4.0V DC. ｗｗｗ．ａｓｅｍｉ．ｔｗ o Rating and Characteristic Curves ( TA=25 C Unless otherwise noted ) KBPC6005 thru KBPC610 Fig. 1 Derating Curve for Output Rectified Current Fig. 2 Maximum Non-repetitive Peak Forward Surge Current Peak Forward Surge Current, Amperes Average Forward Output Current, Amperes 10.0 8.0 6.0 Single-Phase Half Wave 60Hz Resistive or Inductive Load 4.0 2.0 125 8.3ms Single half-sine-Wave [JEDEC Method] 100 75 50 25 0 0 0 50 100 10 1 100 Number of Cycles at 60HZ 150 o Case Temperature, C Fig. 4 Typical Reverse Characteristics Fig. 3 Typical Instantaneous Forward Characteristics 10 10 Instantaneous Reverse Current ,Amperes Instantaneous Forward Current, Amperes 100 Tj=25 C Pulse Width=300us 2% duty cycle 1.0 1.0 Tj=25 C 0.1 .01 0.1 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage, % .01 0.4 0.6 0.8 1.0 1.2 Instantaneous Forward Voltage, Volts ｗｗｗ．ａｓｅｍｉ．ｔｗ 1.4 1.6 120 140