B05S thru B10S 0.5 A Single-Phase Glass Passivated Bridge Rectifiers Rectifier Reverse Voltage 50 to 1000V MINI-DIP Features This series is UL listed under the Recognized Component Index, file number E142814 Ideal for surface mount application The plastic material used carries Underwriters Laboratory flammability recognition 94V-0 Surge overload ratings to 30 amperes High temperature soldering guaranteed 265 C/10 seconds at 5 lbs (2.3kg) tension _ + ~ ~ 7.0 MAX. 2.5 1.1 + 0.2 + 0.2 4.0 + 0.2 Mechanical Data 2.5 + 0.2 Case: Molded plastic Terminals: Plated leads solderable per MIL-STD-202, Method 208 Polarity: Marked on body Mounting Position: Any Weight: 0.0044 ounce, 0.125 grams (approx) 0.65 + 0.15 0.2 1.5 + 0.2 0.9 + 0.2 0.25 + 0.1 4.7 + 0.2 Dimensions in millimeters(1mm =0.0394") Maximum Ratings & Thermal Characteristics Rating at 25 C ambient temperature unless otherwise specified, Resistive or Inductive load, 60 Hz. For Capacitive load derate current by 20%. Parameter Symbol B05S B1S B2S B4S B6S B8S B10S unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS bridge input voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC blocking voltage Maximum average forward rectified output current at TA=40 C (*3) IF(AV) 0.5 0.8* Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A I t 10 A sec ReJA 110 C /W Cj 25.0 pF Rating for fusing ( t<8.3ms) Typical thermal resistance per element (1) Typical junction capacitance per element (2) Operating junction and storage temperature range 2 TJ, TSTG A 2 C -55 to + 150 Electrical Characteristics Rating at 25 C ambient temperature unless otherwise specified. Resistive or Inductive load, 60Hz. For Capacitive load derate by 20 %. Parameter Symbol B05S B1S B2S B4S B6S B8S B10S Unit Maximum instantaneous forward voltage drop per leg at 0.5A VF 1.1 V Maximum DC reverse current at rated TA =25 C DC blocking voltage per element TA =125 C IR 10 500 A Notes: (1)Thermal resistance from Junction to Ambemt on P.C.board mounting. (2)Measured at 2.0MHz and applied reverse voltage of 4.0 volts. (3)R-load on aluminum substrate TA=25 C. ＷＷＷ．ＡＳＥＭＩ．ＴＷ Fig. 1 Derating Curve for Output Rectified Current 1.0 Average Forward Output Current, Amperes 60Hz Resistive of Inductive Load 0.8 0.6 0.4 ( TA=25 C Unless otherwise noted ) Peak Forward Surge Current, Amperes Rating and Characteristic Curves B05S thru B10S Fig. 2 Maximum Non-repetitive Peak Forward Surge Current 60 8.3ms Single half-sine-Wave [JEDEC Method] 50 40 30 20 10 0 10 1 100 Number of Cycles at 60Hz 0.2 Fig. 4 Typical Revers Characteristics 100 0 60 80 100 120 140 Ambient Temperature, C Tj=125 C 10 1.0 Tj=25 C 0.1 .01 10 0 Tj=25 C Pulse Width=300us 2% duty cycle 20 40 60 80 100 120 1.0 Fig. 5 Typical Junction Capacitance 100 Tj=25 C f=1.0MHz Vsin=50mV p.p. 0.1 .01 0.4 0.6 0.8 1.0 1.2 1.4 Instantaneous Forward Voltage, Volts 10 1 1.5 2 10 Reverse Voltage, Volts ＷＷＷ．ＡＳＥＭＩ．ＴＷ 140 Percent of Rated Peak Reverse Voltage, % Capacitance, pF Instantaneous Forward Current, Amperes Fig. 3 Typical Instantaneous Forward Characteristics Instantaneous Reverse Current ,Amperes 40 100