SRV05-4 Low Capacitance TVS Array Description The SRV05-4 is low capacitance transient voltage suppressor array for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning, and other voltage induced transient events. All pins are rated to withstand 25kv ESD pulses using the IEC 61000-4-2 contact discharge method, which can meet the requirement of level 4. S Feature ¾ 500W peak pulse power (tP = 8/20μs) ¾ SOT23-6L package ¾ Working voltage: 5 V ¾ Low clamping voltage ¾ Low capacitance ¾ RoHS Compliant Transient Protection for High Speed Data Lines to IEC61000-4-2(ESD)±15kV(air),±8kV(Contact) IEC61000-4-4(EFT) 40A(5/50ns) IEC61000-4-5(lightning) 24A(8/20us) Applications ¾ USB 2.0 Power & Data Line Protection ¾ DVI & HDMI Port Protection ¾ Serial ATA Port Protection ¾ Mobile Handsets ¾ Digital Cameras and camcorders ¾ PDA & MP3 Players ¾ Digital TV and Set-top Boxes ¾ Other Portable Electronic Components Electrical characteristics per line@( unless otherwise specified) Parameter Symbol Reverse Stand-off Voltage VRWM Reverse Breakdown Voltage VBR It = 1mA Reverse Leakage Current IR VRWM =5.0V, T=25℃ Clamping Voltage VC IPP = 1A, Clamping Voltage Junction Capacitance Rev.04 Conditions Min. Typ. Max. Units 5 V 6 V 1 μA tP = 8/20μs 12.5 V VC IPP=5A, tP = 8/20μs 28.0 V CJ VR=0V, f = 1MHz 5 pF 1 2.5 www.prisemi.com Low Capacitance TVS Array SRV05-4 Absolute maximum rating@25℃ Rating Symbol Value Units Peak Pulse Power (tp=8/20μs) Ppp 350 W Operating Temperature TJ -55 to +150 ℃ Storage Temperature TSTG -55 to +150 ℃ Typical Characteristics Fig1.Non-Repetitive Peak Pulse Power vs.Pulse time Fig2. Power Derating Curve Fig3. Pulse Waveform Rev.04 Fig4. Forward Voltage vs. Forward Current 2 www.prisemi.com Low Capacitance TVS Array SRV05-4 Applications informations Fig5.Video Interface Protection Fig6.Dual USB Port Protection Fig7.Digital Video Interface (DVI) Protection Rev.04 3 www.prisemi.com Low Capacitance TVS Array SRV05-4 Product dimension (SOT23-6L) Rev.04 4 www.prisemi.com Low Capacitance TVS Array SRV05-4 IMPORTANT NOTICE and are registered trademarks of Prisemi Electronics Co., Ltd (Prisemi) ,Prisemi reserves the right to make changes without further notice to any products herein. Prisemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Prisemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in Prisemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Prisemi does not convey any license under its patent rights nor the rights of others. The products listed in this document are designed to be used with ordinary electronic equipment or devices, Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Website: http://www.prisemi.com For additional information, please contact your local Sales Representative. ©Copyright 2009, Prisemi Electronics is a registered trademark of Prisemi Electronics. All rights are reserved. Rev.04 5 www.prisemi.com