SLVU2.8 Low Capacitance TVS Array Description The SLVU2.8 is low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning, and other voltage induced transient events. All pins are rated to withstand 25kv ESD pulses using the IEC61000-4-2 contact discharge method, which can meet the requirement of level 4. S Feature ¾ 500W peak pulse power (tP = 8/20μs) ¾ SOT-23 package ¾ Working voltage: 2.8V ¾ Low clamping voltage ¾ Low capacitance Applications ¾ Cellular handsets and accessories ¾ Portable electronics ¾ LAN/WAN equipment ¾ High speed data lines ¾ Fire wire Electrical characteristics per line@( unless otherwise specified) Parameter Symbol Conditions Min. Reverse Stand-off Voltage VRWM Reverse Breakdown Voltage VBR It = 1mA,pin3 to pin1 Reverse Leakage Current IR VRWM =2.8V, T=25℃ Clamping Voltage VC IPP = 1A, Clamping Voltage VC IPP=45A, Junction Capacitance CJ 3.0 Typ. Max. Units 2.8 V 4.0 V 1 μA tP = 8/20μs 6.0 V tP = 8/20μs 22.0 V 4.0 pF VR=0V, f = 1MHz,pin1and2 3.0 Absolute maximum rating@25℃ Rev.04 Rating Symbol Value Units Peak Pulse Power (tp=8/20μs) Ppp 500 W Operating Temperature TJ -55 to +150 ℃ Storage Temperature TSTG -55 to +150 ℃ 1 www.prisemi.com Low Capacitance TVS Array SLVU2.8 Typical Characteristics Product dimension Rev.04 2 www.prisemi.com Low Capacitance TVS Array SLVU2.8 IMPORTANT NOTICE and are registered trademarks of Prisemi Electronics Co., Ltd (Prisemi) ,Prisemi reserves the right to make changes without further notice to any products herein. Prisemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Prisemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in Prisemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Prisemi does not convey any license under its patent rights nor the rights of others. The products listed in this document are designed to be used with ordinary electronic equipment or devices, Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Website: http://www.prisemi.com For additional information, please contact your local Sales Representative. ©Copyright 2009, Prisemi Electronics is a registered trademark of Prisemi Electronics. All rights are reserved. Rev.04 3 www.prisemi.com