PESDNC5D7VU ESD Protector Description The PESDNC5D7VU protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional area junctions for conducting high transient currents, offer desirable electrical characteristics for board level protection, such as fast response time, low operating voltage. It gives designer the flexibility to protect one unidirectional line in applications where arrays are not practical. Feature ¾ 200W peak pulse power per line (tP = 8/20μs) ¾ SOD-523 package ¾ Replacement for MLV(0603) ¾ Unidirectional configurations ¾ Response Time is Typically < 1 ns ¾ Protect one I/O or power line ¾ Low clamping voltage IF V VC VBR VRWM IR VF IT ¾ RoHS compliant ¾ Transient protection for data lines to IEC 61000-4-2(ESD) ±15KV(air), IPP ±8KV(contact); IEC 61000-4-4 (EFT) 40A (5/50ns) Applications ¾ Cellular phones ¾ Portable devices ¾ Digital cameras ¾ Power supplies Electrical characteristics per line@25℃( unless otherwise specified) Parameter Symbol Reverse Stand-off Voltage VRWM Reverse Breakdown Voltage VBR It = 1mA Reverse Leakage Current IR VRWM = 5V T=25℃ Clamping Voltage VC IPP = 1A Clamping Voltage VC IPP = 5A Clamping Voltage Junction Capacitance Rev.05 Conditions Min. Typ. Max. Units 7 V 8 V 1 μA tP = 8/20μs 9.5 V tP = 8/20μs 13.5 V VC IPP=15A tP = 8/20μs 20.0 V Cj VR=0V f = 1MHz 1 80 pF www.prisemi.com ESD Protector PESDNC5D7VU Absolute maximum rating@25℃ Rating Symbol Value Units Unidirectional Peak Pulse Power (tp=8/20μS) Ppp 200 W Operating Temperature TJ -55 to +150 ℃ Storage Temperature TSTG -55 to +150 ℃ Tf=8μs 100 100 80 % Of Rated Power IPP – Peak Pulse Current - % of IPP Typical Characteristics 60 tP =20μs(IPP /2) 40 20 80 60 40 20 0 0 0 5 10 15 20 25 0 30 25 50 t - Time -μs 75 100 125 150 TL – Lead Temperature - ℃ Fig 1.Pulse Waveform Fig 2.Power Derating Curve Product dimension SOD-523 PACKAGE C Inches A Millimeters Dim B E D H MIN MAX MIN MAX A 0.043 0.051 1.10 1.30 B 0.028 0.035 0.70 0.90 C 0.059 0.067 1.50 1.70 D 0.020 0.028 0.50 0.70 E 0.010 0.014 0.25 0.35 F 0.006 0.010 0.15 0.25 H 0.0028 0.0079 0.07 0.20 F Rev.05 2 www.prisemi.com ESD Protector PESDNC5D7VU IMPORTANT NOTICE and are registered trademarks of Prisemi Electronics Co., Ltd (Prisemi) ,Prisemi reserves the right to make changes without further notice to any products herein. Prisemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Prisemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in Prisemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Prisemi does not convey any license under its patent rights nor the rights of others. The products listed in this document are designed to be used with ordinary electronic equipment or devices, Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Website: http://www.prisemi.com For additional information, please contact your local Sales Representative. ©Copyright 2009, Prisemi Electronics is a registered trademark of Prisemi Electronics. All rights are reserved. Rev.05 3 www.prisemi.com