SMT Gate Drive transformers PA200xNL Basic and Operational Insulation Higher Volt-µsec capability Basic insulation (1.4mm creepage/clearance) and operational available Operating frequency: 50kHz and up Electrical Specifications @ 25°C — Operating Temperature -40°C to 130°C 5 Part1,2 Number Turns Ratio Pri-Sec Insulation (VRMS) Primary Inductance (μH MIN) MAX1 V*μsec Leakage Inductance (μH MAX) DCR Primary (Ω MAX) DCR Secondary (Ω MAX) Operational Insulation PA2001NL 1:1 1500 12 403 0.46 0.60 0.60 PA2002NL 1:1:1 1500 60 1800 0.60 1.60 1.60 PA2004NL 1:1:1 1500 16 437 0.85 0.85 0.85 Basic Insulation (1.4 mm creepage and clearance between Primary and Secondary) PA2005NL 1:1:1 1500 28 840 0.75 1.05 1.05 PA2006NL 1:1 1500 28 864 0.75 0.82 0.82 PA2007NL 1:1 1500 55.5 1490 0.80 1.15 1.15 PA2008NL 2:1:1 1500 55.5 1425 0.80 1.15 0.575 PA2009NL 2.5:1:1 1500 55.5 1486 0.80 1.15 0.425 NOTES: 1.The maximum volt-µsec rating limits the peak flux density to 2200 Gauss when used in a unipolar drive application. For bi-polar drive applications a maximum volt-µsec of two times this rating is acceptable (ie: 2* (volt*µsec rating) Volt*µsec = (voltage applied to the primary) * dutycycle / Frequecy = V * alpha / Freq_Hz = V * µsec 2. Leakage inductance is measured at primary terminals with all secondaries shorted. 3.Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part Mechanical � ��������� ����� ���� ���� ���� ���� � ��������� ���������� � ���� ���� �������������������� � � ��������� ����� � � 3 4 Weight . . . . . . . . . . . . . . 0.28 grams Tape & Reel . . . . . . . . . . . .1500/reel Tube . . . . . . . . . . . . . . . . . . 60/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 � � �������� ��������� 6 � ��������� ����� � 1 � ���� ���� ��������� ����� 11.8 x 8.8 x 4.0 11.8 x 8.8 x 4.0 9.0 x 8.6 x 7.6 9.0 x 8.6 x 7.6 9.0 x 8.6 x 7.6 Schematic ���� ���� ������� ���� 8.6 x 6.7 x 2.5 9.0 x 8.6 x 7.6 8.6 x 6.7 x 3.6 number (i.e. PA2002NL becomes PA2002NLT). Pulse complies to industry standard tape and reel specification EIA481. 4.The “NL” suffix indicates an RoHS-compliant part number. 5.The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. ��������� ����� �������� ��������� Package Size (L x W x H) (mm MAX) ������� ���� ���� ���� ���� ���� ���� ���� ��������� ����� ��������� ���������� � � � ���� ���� ���� ���� �������������������� http://www.anwen.com.cn China:86-760-88991508 � Weight . . . . . . . . . . . . . . 0.23 grams Tape & Reel . . . . . . . . . . . . .800/reel Tube . . . . . . . . . . . . . . . . . . 75/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 P663.B (10/08) SMT Gate Drive transformers PA200xNL Basic and Operational Insulation Mechanicals ��������� ����� � � � � Schematics ���� ���� ����� ���� �� ������������������������������ � ���� ���� � � � ���� ���� ��������� ����� ��������� � � � ���� ���� ���� ���� ����������� � � � � � � � �������� � � � �������������������� � Weight . . . . . . . . . . . . . . 0.60 grams Tape & Reel . . . . . . . . . . . . .400/reel Tube . . . . . . . . . . . . . . . . . . 50/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 ��������� ����� ��������� ���������� ���� ���� �������� �������� �������� �������� ����� ����� ���� ���� ����� ����� � ���� ���� ���� ���� ���� ���� � ��������� ���� ���� ���� ���� � � ���� ���� ���� ���� �������������������� ���� ���� ��� ��������� ���������� � � � � � � � � �������� �������� � � � � � � � � � � � � Weight . . . . . . . . . . . . . . 0.48 grams Tape & Reel . . . . . . . . . . . . .900/reel Tube . . . . . . . . . . . . . . . . . . 60/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 P663.B (10/08)