PA2001NLT DataSheet - Component Distributors, Inc.

SMT Gate Drive transformers
PA200xNL Basic and Operational Insulation
Higher Volt-µsec capability
Basic insulation (1.4mm creepage/clearance)
and operational available
Operating frequency: 50kHz and up
Electrical Specifications @ 25°C — Operating Temperature -40°C to 130°C 5
Part1,2
Number
Turns
Ratio
Pri-Sec
Insulation
(VRMS)
Primary
Inductance
(μH MIN)
MAX1
V*μsec
Leakage
Inductance
(μH MAX)
DCR
Primary
(Ω MAX)
DCR
Secondary
(Ω MAX)
Operational Insulation
PA2001NL
1:1
1500
12
403
0.46
0.60
0.60
PA2002NL
1:1:1
1500
60
1800
0.60
1.60
1.60
PA2004NL
1:1:1
1500
16
437
0.85
0.85
0.85
Basic Insulation (1.4 mm creepage and clearance between Primary and Secondary)
PA2005NL
1:1:1
1500
28
840
0.75
1.05
1.05
PA2006NL
1:1
1500
28
864
0.75
0.82
0.82
PA2007NL
1:1
1500
55.5
1490
0.80
1.15
1.15
PA2008NL
2:1:1
1500
55.5
1425
0.80
1.15
0.575
PA2009NL
2.5:1:1
1500
55.5
1486
0.80
1.15
0.425
NOTES:
1.The maximum volt-µsec rating limits the peak flux density to 2200 Gauss when used
in a unipolar drive application. For bi-polar drive applications a maximum volt-µsec
of two times this rating is acceptable (ie: 2* (volt*µsec rating) Volt*µsec = (voltage
applied to the primary) * dutycycle / Frequecy = V * alpha / Freq_Hz = V * µsec
2. Leakage inductance is measured at primary terminals with all secondaries shorted.
3.Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part
Mechanical
�
���������
�����
����
����
����
����
�
���������
����������
�
����
����
��������������������
�
�
3
4
Weight . . . . . . . . . . . . . . 0.28 grams
Tape & Reel . . . . . . . . . . . . 1500/reel
Tube . . . . . . . . . . . . . . . . . . 60/tube
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
�
�
��������
���������
�����������������
6
�
���������
�����
�
1
�
����
����
���������
�����
11.8 x 8.8 x 4.0
11.8 x 8.8 x 4.0
9.0 x 8.6 x 7.6
9.0 x 8.6 x 7.6
9.0 x 8.6 x 7.6
Schematic
����
����
�������
����
8.6 x 6.7 x 2.5
9.0 x 8.6 x 7.6
8.6 x 6.7 x 3.6
number (i.e. PA2002NL becomes PA2002NLT). Pulse complies to industry standard
tape and reel specification EIA481.
4.The “NL” suffix indicates an RoHS-compliant part number.
5.The temperature of the component (ambient plus temperature rise) must be within
the stated operating temperature range.
���������
�����
��������
���������
�����������������
Package Size
(L x W x H)
(mm MAX)
�
���������
�����
�
�������
����
����
����
����
����
����
����
���������
�����
���������
����������
�
�
�
����
���� ����
����
��������������������
�
Weight . . . . . . . . . . . . . . 0.23 grams
Tape & Reel . . . . . . . . . . . . . 800/reel
Tube . . . . . . . . . . . . . . . . . . 75/tube
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 755 33966678 • Taiwan 886 3 4641811
www.pulseeng.com
P663.B (10/08)
SMT Gate Drive transformers
PA200xNL Basic and Operational Insulation
Mechanicals
���������
�����
�
���������
�����
�
�
�
����
����
�������
����
�
�
�
����
����
���������
�����������������
�
������������������������������
�
����
����
�
�����������
�
Schematics
�
�
����
����
����
����
�
�
�
�
�
��������
�
�
�
��������������������
�
Weight . . . . . . . . . . . . . . 0.60 grams
Tape & Reel . . . . . . . . . . . . . 400/reel
Tube . . . . . . . . . . . . . . . . . . 50/tube
Dimensions: Inches
mm
Unless otherwise specified, all tolerances are ± .010
0,25
���������
�����
���������
����������
����
����
��������
��������
���������
�����������������
����
����
��������
��������
�����
�����
����
����
�����
�����
�
����
����
����
����
����
����
�
����
����
�
�
�
�
�
�
����
����
����
����
�
�
�
�
��������������������
����
����
���
��������
��������
�
�
�
�
�
�
�
�
�
�
�
�
Weight . . . . . . . . . . . . . . 0.48 grams
Tape & Reel . . . . . . . . . . . . . 900/reel
Tube . . . . . . . . . . . . . . . . . . 60/tube
���������
Dimensions: Inches
mm
Unless otherwise specified, all tolerances are ± .010
0,25
����������
For More Information:
Pulse Worldwide
Headquarters
Pulse
Europe
12220 World Trade Dr.
San Diego, CA 92128
U.S.A.
www.pulseeng.com
Einsteinstrasse 1
D-71083 Herrenberg
Germany
Tel: 858 674 8100
Fax: 858 674 8262
Tel: 49 7032 7806 0
Fax: 49 7032 7806 12
Pulse China Headquarters
Pulse North China
Pulse South Asia
Pulse North Asia
B402, Shenzhen
Tech-Innovation International
Tenth Kejinan Rd.
High-Tech Industrial Park
Nanshan District, Shenzhen
China
Tel: 86 755 33966678
Fax: 86 755 33966700
Room 1503
XinYin Building
No. 888 YiShan Rd.
Shanghai 200233
China
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
No. 26
Kao Ching Rd.
Yang Mei Chen
Tao Yuan Hsien
Taiwan, R. O. C.
Tel: 86 21 54643211/2
Fax: 86 21 54643210
Tel: 65 6287 8998
Fax: 65 6280 0080
Tel: 886 3 4641811
Fax: 886 3 4641911
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2007. Pulse Engineering, Inc. All rights reserved.
www.pulseeng.com
P663.B (10/08)