SMT Gate Drive Transformers PA200xNL Basic and Operational Insulation Higher Volt-µsec capability Basic insulation (1.4mm creepage/clearance) and operational available Operating frequency: 50kHz and up Electrical Specifications @ 25°C - Operating Temperature -40°C to 130°C 5 Turns Ratio Pri-Sec Insulation (VRMS) MAX V*µsec Primary Inductance (µH MIN) Leakage Inductance (µH MAX) DCR Primary (Ω MAX) DCR Secondary (Ω MAX) Package Size (L x W x H) (mm MAX) PA2001NL 1:1 1500 12 403 0.46 0.60 0.60 8.6 x 6.7 x 2.5 PA2002NL 1:1:1 1500 60 1800 0.60 1.60 1.60 9.0 x 8.6 x 7.6 PA2004NL 1:1:1 1500 20 437 0.85 0.85 0.85 8.6 x 6.7 x 3.6 Part 1, 2 Number 1 OPERATIONAL INSULATION BASIC INSULATION (1.4MM CREEPAGE AND CLEARANCE BETWEEN PRIMARY AND SECONDARY) PA2005NL 1:1:1 1500 26 840 0.75 1.05 1.05 11.8 x 8.8 x 4.0 PA2006NL 1:1 1500 26 864 0.75 0.82 0.82 11.8 x 8.8 x 4.0 PA2007NL 1:1 1500 53 1490 0.80 1.15 1.15 9.0 x 8.6 x 7.6 PA2008NL 2:1:1 1500 52 1425 0.80 1.15 0.575 9.0 x 8.6 x 7.6 PA2009NL 2.5:1:1 1500 47 1486 0.80 1.15 0.425 9.0 x 8.6 x 7.6 Notes: 1. The maximum volt-µsec limits the peak flux density to 2800 Gauss when used in a unipolar drive application. For bi-polar drive applications, a maximum voltµsec of two times this rating is acceptable (i.e. 2* (volt*µsec rating) Volt*µsec = (voltage applied to the primary) * dutycycle / Frequency = V * alpha / Freq_ Hz = V * µsec 2. Leakage inductance is measured at primary terminals with all secondaries shorted. 3. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part number (i.e. PA2002NL becomes PA2002NLT). Pulse complies to industry standard tape and reel specification EIA481. 4. The “NL” suffix indicates an RoHS-compliant part number. 5. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. Mechanical Schematic PA2001NL 0.365 9,27 .340 MAX 8,64 1 PA2001NL Date Code Country of Origin 4X .100 2,54 6 .265 MAX 6,73 .200 5,08 0.07 1,78 .100 2,54 3 .098 MAX 2,49 .240 6,1 .005/0,13 4 SURFACES USA 858 674 8100 Germany 49 7032 7806 0 1 4 SUGGESTED PAD LAYOUT Singapore 65 6287 8998 pulseelectronics.com Shanghai 86 21 62787060 1 6 3 4 Weight .........................0.28 grams Tape & Reel .....................1500/reel Tube ...................................60/tube Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Dimensions: China 86 755 33966678 Taiwan 886 3 4356768 P663.G (04/14) SMT Gate Drive Transformers PA200xNL Basic and Operational Insulation Mechanicals (CONTINUED) Schematics PA2004NL 1 1 6 1 2 2 .355 9,27 .340 MAX 8,64 5 3 6 6 5 PA2004NL Date Code Country of Origin .200 5,08 0.07 1,78 4 3 4X .265 MAX 6,73 .140 3,56 4 .200 5,08 .100 2,54 .100 .070 2,54 1,78 3 .220 Weight .........................0.23 grams Tape & Reel ......................800/reel Tube ...................................75/tube 4 .240 5,59 6,1 .140 MAX 3,56 .320 8,13 .005/0,13 Dimensions: Unless otherwise specified, all tolerances are ± .010 0,25 SUGGESTED PAD LAYOUT 4 SURFACES Inches mm PA2002NL, PA2007NL, PA2008NL, PA2009NL .300 7,62 .355 MAX 9.02mm .100 2,54 8 7 6 5 PA2002NL / PA2008NL / PA2009NL .100 2,54 8 1 5 .050 1,27 .340 MAX 8,64 PAXXXXNL Date Code Country of Origin 1 2 3 1 8 4 SUGGESTED PAD LAYOUT 4 6 4 5 .225 5,71 .060 1,52 3 PA2007NL 1 8 4 5 Weight .........................0.60 grams Tape & Reel ......................400/reel Tube ...................................50/tube .300 MAX 7,62 Dimensions: .005/0,13 6 SURFACES 2 pulseelectronics.com Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 P663.G (04/14) SMT Gate Drive Transformers PA200xNL Basic and Operational Insulation Mechanical (CONTINUED) Schematic PA2005NL, PA2006NL PA2005NL 2 .430 10,92 .460 11,68 .070 1,78 .330 8,38 1 .340 8,64 PA2005NL PA2006NL .250 6,35 6 4 .025 0,64 .250 6,35 .100 2,54 .100 2,54 5 3 6 Date Code Country of Origin .330 8,38 1 3 4 SUGGESTED PAD LAYOUT .160 4,06 MAX .005/0,13 6 SURFACES PA2006NL 1 3 6 4 Weight ..........................0.48 grams Tape & Reel ......................900/reel Tube ...................................60/tube Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Dimensions: For More Information Pulse Worldwide Headquarters 12220 World Trade Drive San Diego, CA 92128 U.S.A. Pulse Europe Zeppelinstrasse 15 71083 Herrenberg Germany Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia B402, Shenzhen Academy of Room 2704/2705 135 Joo Seng Road 3F, No. 198 Aerospace TechnolSuper Ocean Finance #03-02 Zhongyuan Road ogy Bldg. Ctr. PM Industrial Bldg. Zhongli City 10th Kejinan Road 2067 Yan An Road Singapore 368363 Taoyuan County 32068 High-Tech Zone West Taiwan R. O. C. Nanshan District Shanghai 200336 Tel: 886 3 4356768 Shenzen, PR China China Tel: 65 6287 8998 Fax: 886 3 4356823 (Pulse) Tel: 858 674 8100 Tel: 49 7032 78060 518057 Fax: 65 6287 8998 Fax: 886 3 4356820 (FRE) Fax: 858 674 8262 Fax: 49 7032 7806 135 Tel: 86 755 33966678 Tel: 86 21 62787060 Fax: 86 755 33966700 Fax: 86 2162786973 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2014. Pulse Electronics, Inc. All rights reserved. 3 pulseelectronics.com P663.G (04/14)