中山市安稳科技有限公司 Common Mode Filters(SMD) For General Signal Line Operating temperature range covers from –40 to +105°C Non-dissolution of the abutment amounts in circuit board mounting The products contain no lead and also support lead-free soldering. This product conforms to the standards that are slated to be introduced under the RoHS Directive SPECIFICATION FOR APPROVAL 密 Ⅰ﹒ELECTRICAL CHARACTERISTICS ： Part No. Indductance DC L1 \ L2 Test condition ( μH ) Rated Freq Resistance Voltage Current Impedance Range N1\N2(Ω ) Vdc ( V ) (A) ( Ω ) ( MHz ) 加 SF0905100YL□-□□□ 10±30% 0.1V,1KHz 0.08 max 50 1.6 200 min. 20-300 SF0905250YL□-□□□ 25±30% 0.1V,1KHz 0.16 max 50 1.0 600min. 20-150 SF0905400YL□-□□□ 40±30% 0.1V,1KHz 0.25 max 50 0.9 800min. 20-100 SF0905500YL□ -□□□ 50±30% 0.1V,1KHz 0.32 max 50 0.8 1500min. 20-100 SF0905251YL□ -□□□ 250±50% 0.1V,1KHz 0.13 max 50 1.2 600min. 3-20 SF0905471YL□ -□□□ 470±50% 5mV,100KHz 0.14 max 50 1.1 1000min. 2-20 SF0905501YL□ -□□□ 500±50% 5mV,100KHz 0.15 max 50 1.0 1000min. 1-20 SF0905102YL□ -□□□ 1000±50% 5mV,100KHz 0.31 max 50 0.8 1500min. 1-15 SF0905202YL□ -□□□ 2000±50% 5mV,100KHz 0.42 max 50 0.6 3000min. 1-5 SF0905472YL□ -□□□ 4700±50% 5mV,100KHz 0.90 max 50 0.4 4000min. 0.3-3 SF0905652YL□ -□□□ 6500±50% 5mV,100KHz 1.05 max 50 0.3 5000min. 0.3-2 安 稳 1). □ ：Packaging information … A ：Bulk ， B ：Taping Reel 2). □.□.□:Reference code 3).. HI-Pot test ( N1-N2 ) ：500Vac / 60Hz , 3mA , 3sec. 4). Test equipment : Inductance 100Y ~ 500Y ( HP4274A ) 251Y ~ 652Y ( HP4194A ) Impedance 100Y ~ 202Y ( HP4291A ) 472Y ~ 652Y ( HP4194A ) Ⅱ﹒IMPEDANCE VS﹒ FREQUENCY ： 地址:中山市火炬高技术产业开发区 16 栋 TEL:0760‐88280137 Fax:0760‐23304508 www.anwen.com.cn 页码 1 中山市安稳科技有限公司 Common Mode Filters(SMD) For General Signal Line SPECIFICATION FOR APPROVAL Ⅲ﹒MATERIALS： a﹒Core：Ferrite Toroidal core b﹒Wire：Enamelled copper wire （class H） c﹒Base：LCP d﹒Case：LCP e﹒Terminal：Cu/Ni/Sn 密 f﹒Remark：Products comply with RoHS requirements Ⅳ﹒GENERAL SPECIFICATION： a﹒Temp. rise ：45℃ max. 加 b﹒Storage temp.：-40℃ ----+105℃ c﹒Operating temp .：-40℃----+105℃ d﹒Resistance to solder heat：260℃.10 secs. 稳 Ⅵ﹒Mechanical/Schematics 安 地址:中山市火炬高技术产业开发区 16 栋 TeL:0760‐88280137 Fax:0760‐23304508 www.anwen.com.cn 页码 1 中山市安稳科技有限公司 Common Mode Filters(SMD) For General Signal Line SPECIFICATION FOR APPROVAL Ⅶ. DWGING NUMBER EXPRESSION： 密 加 稳 安 Appendix code 1：Product Classification L：Lead Free Standard products comply with RoHS' requirements 1 ~ 9：Lead Free Special products comply with RoHS' requirements 地址:中山市火炬高技术产业开发区 16 栋 Tel:0760‐88280137 Fax:0760‐23304508 www.anwen.com.cn 页码 1