MB-XMD-1W5 Series 1.5W 1.5W,,1000VDC Isolated single output (1 (1""×1")DIP DC-DC Converters OUTPUT SPECIFICATIONS Output power Voltage accuracy 1.5 Watts max ±4 Full load and nominal Vin Minimum load Line regulation Load regulation 0% ±0.3% LL to HL at Full Load 25% to 100% FL ±1.5 MB05 output ±0.5 others Cross regulation Ripple and noise FEATURES ±5% Asymmetrical load 25% / 100% FL 20MHz bandwidth 50mVp-p ±0.02% /℃, max Temperature coefficient Short circuit protection 1.5 WATTS REGULATED OUTPUT POWER ◆ LOW OUTPUT RIPPLE & NOISE ◆ Short term INPUT SPECIFICATIONS Input voltage range PI TYPE INPUT FILTER ◆ 1000VDC ISOLATION VOLTAGE ◆ 5V nominal input 4.5～5.5VDC 12V nominal input 10.8～13.2VDC 24V nominal input 21.6～26.4VDC 48V nominal input 43.2～52.5VDC Input filter HIGH EFFICIENCY UP TO 78% ◆ Pi type STANDARD (1"×1") DIP PACKAGE ◆ FIVE-SIDED EMI SHIELD ◆ GENERAL SPECIFICATIONS MODEL SELECTION Efficiency MB①05②05③-X④MD⑤-1W5⑥ Isolation voltage ①Product Series ②Input Voltage ③Output Voltage ④Fixed Input ⑤(1"×1")DIP Package Style ⑥Rated Power See table 1000VDC, min 109ohms, min Isolation resistance Isolation capacitance 30pF, max Switching frequency 20KHz, min Design meet safety standard APPLICATIONS IEC60950-1, UL60950-1,EN60950-1 Case material Nickel-coated copper Base material Non-conductive black plastic Potting material Epoxy The MB-XMD-1W5 series offer 1.5 watts of output power from a package in an IC compatible1"×1" DIP configuration (UL94-V0) 1.00 X 1.00 X 0.40 Inch Dimensions (25.4 X 25.4 X 10 mm) without derating to 71℃ ambient temperature.MB-XMD-1W5 Weight 16g (0.55oz) series have input voltage of MTBF 1 5.531 x 106 hrs 4.5-5.5,10.8-13.2,21.6-26.4&43.2-52.5VDC. ENVIRONMENTAL SPECIFICATIONS MB-XMD-1W5 features 1000VDC of isolation voltage. Operating temperature range A safety designed meet to EN60950-1 and UL60950-1. -25℃ ~ +71℃ Maximum case temperature +100℃ Storage temperature range All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. Thermal impedance -55℃ ~ +105℃ Nature convection Thermal shock 20℃/watt MIL-STD-810D Vibration 10~55Hz, 10G, 30minutes along X,Y and Z Relative humidity 5% to 95% RH EMC CHARACTERISTICS MICRODC RESERVES THE COPYRIGHT http://www.microdc.cn Conducted emissions EN55022 Radiated emissions EN55022 ESD EN61000-4-2 Perf. Criteria B Radiated immunity EN61000-4-3 Perf. Criteria A Fast transient EN61000-4-4 Perf. Criteria B Surge EN61000-4-5 Perf. Criteria B Conducted immunity EN61000-4-6 Perf. Criteria A Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Class A Class A Page 1 of 2 MB-XMD-1W5 Series Output Voltage Output Current Input Current2 Eff3 (%) Capacitor Load max4 4.5 – 5.5 VDC 5 VDC 300mA 405.4mA 74 470uF 4.5 – 5.5 VDC 12 VDC 125mA 162.3mA 77 330uF MB0515XMD-1W5 4.5 – 5.5 VDC 15 VDC 100mA 128.2mA 78 330uF MB1205XMD-1W5 10.8 – 13.2 VDC 5 VDC 300mA 416.7mA 72 470uF MB1212XMD-1W5 10.8 – 13.2 VDC 12 VDC 125mA 168.9mA 74 330uF MB1215XMD-1W5 10.8 – 13.2 VDC 15 VDC 100mA 133.3mA 75 330uF MB2405XMD-1W5 21.6 – 26.4 VDC 5 VDC 300mA 434.8mA 69 470uF MB2412XMD-1W5 21.6 – 26.4 VDC 12 VDC 125mA 178.6mA 70 330uF MB2415XMD-1W5 21.6 – 26.4 VDC 15 VDC 100mA 140.8mA 71 330uF MB4805XMD-1W5 43.2 – 52.5VDC 5 VDC 300mA 422.5mA 71 470uF MB4812XMD-1W5 43.2 – 52.5VDC 12 VDC 125mA 171.2mA 73 330uF MB4815XMD-1W5 43.2 – 52.5VDC 15 VDC 100mA 135.1mA 74 330uF Model Number Input Range MB0505XMD-1W5 MB0512XMD-1W5 Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40℃. (Ground fixed and controlled environment) 2. Maximum value at nominal input voltage and full load of standard type. 3. Typical value at nominal input voltage and full load. 4. Test by minimum Vin and constant resistive load. RECOMMENDED FOOTPRINT Single Output RECOMMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) Note: Unit:mm[inch] TUBE OUTLINE DIMENSIONS Pin section tolerances:±0.10mm[±0.004inch] General tolerances:±0.25mm[±0.010inch] FOOTPRINT DETAILS Pin Single 1 GND 2 Vin 3 +V0 4 NC 5 http://www.microdc.cn Note: Unit :mm[inch] General tolerances: L=530mm[20.866inch] L=220mm[8.661inch] ±0.50mm[±0.020inch] Tube Quantity: 19pcs Tube Quantity: 7pcs When the environment temperature is higher than 71 71°°C, the product output ower should be less then 60% of the rated power. No parallel connection or plug and play. Use dual output simultaneously, forbid opening output pin (0V) to use as single output. 0V Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 2