MB-XMD-1W5 Series 1000VDC Isolated 1.5W single output (1 (1""×1")DIP Converters OUTPUT SPECIFICATIONS Output power Voltage accuracy 1.5 Watts max ±4 Full load and nominal Vin Minimum load Line regulation Load regulation Cross regulation Ripple and noise 0% ±0.3% LL to HL at Full Load 25% to 100% FL MB05 output ± 1.5 others ± 0.5 Asymmetrical load 25% / 100% FL 20MHz bandwidth ±0.02% /℃, max Temperature coefficient Short circuit protection FEATURES ±5% 50mVp-p Short term INPUT SPECIFICATIONS ◆1.5 WATTS REGULATED OUTPUT POWER Input voltage range ◆LOW OUTPUT RIPPLE & NOISE ◆PI TYPE INPUT FILTER 4.5 – 5.5VDC 5V nominal input 12V nominal input 10.8 – 13.2VDC 24V nominal input 21.6 – 26.4VDC 48V nominal input 43.2 – 52.5VDC Input filter ◆1000VDC ISOLATION VOLTAGE Pi type ◆HIGH EFFICIENCY UP TO 78% ◆STANDARD (1"×1") DIP PACKAGE GENERAL SPECIFICATIONS Efficiency ◆FIVE-SIDED EMI SHIELD See table Isolation voltage 1000VDC, min 109ohms, min Isolation resistance MODEL SELECTION ① ② ③ ④ ⑤ ⑥ MB 05 05 -X MD -1W5 Isolation capacitance 30pF, max Switching frequency 20KHz, min Design meet safety standard ①Product Series ②Intput Voltage ③Output Voltage ④Fixed Input ⑤(1"×1")DIP Package Style ⑥Rated Power IEC60950-1, UL60950-1,EN60950-1 Case material Nickel-coated copper Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) 1.00 X 1.00 X 0.40 Inch Dimensions (25.4 X 25.4 X 10 mm) APPLICATIONS Weight The MB-XMD-1W5 series offer 1.5 watts of output power from a 16g (0.55oz) 5.531 x 106 hrs MTBF (Note 1) package in an IC compatible 1"×1" DIP configuration without ENVIRONMENTAL SPECIFICATIONS derating to 71℃ ambient temperature.MB-XMD-1W5 series have Operating temperature range input voltage of 4.5-5.5,10.8-13.2,21.6-26.4&43.2-52.5VDC. Maximum case temperature MB-XMD-1W5 features 1000VDC of isolation voltage. A safety Storage temperature range designed meet to EN60950-1 and UL60950-1. All models are Thermal impedance -25℃ ~ +71℃ +100℃ -55℃ ~ +105℃ Nature convection 20℃/watt Thermal shock particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. MIL-STD-810D Vibration 10~55Hz, 10G, 30minutes along X,Y and Z Relative humidity 5% to 95% RH EMC CHARACTERISTICS MICRODC reserves the copyright http://www.microdc.cn Conducted emissions EN55022 Radiated emissions EN55022 ESD EN61000-4-2 Class A Class A Perf. Criteria Radiated immunity EN61000-4-3 Perf. Criteria Fast transient EN61000-4-4 Perf. Criteria B Surge EN61000-4-5 Perf. Criteria B Conducted immunity EN61000-4-6 Perf. Criteria A Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 2 MB-XMD-1W5 Series Output Voltage Output Current Input Current(2) Eff(3) (%) Capacitor Load max(4) 4.5 – 5.5 VDC 5 VDC 300mA 405.4mA 74 470uF 4.5 – 5.5 VDC 12 VDC 125mA 162.3mA 77 330uF MB0515XMD-1W5 4.5 – 5.5 VDC 15 VDC 100mA 128.2mA 78 330uF MB1205XMD-1W5 10.8 – 13.2 VDC 5 VDC 300mA 416.7mA 72 470uF MB1212XMD-1W5 10.8 – 13.2 VDC 12 VDC 125mA 168.9mA 74 330uF MB1215XMD-1W5 10.8 – 13.2 VDC 15 VDC 100mA 133.3mA 75 330uF MB2405XMD-1W5 21.6 – 26.4 VDC 5 VDC 300mA 434.8mA 69 470uF MB2412XMD-1W5 21.6 – 26.4 VDC 12 VDC 125mA 178.6mA 70 330uF MB2415XMD-1W5 21.6 – 26.4 VDC 15 VDC 100mA 140.8mA 71 330uF MB4805XMD-1W5 43.2 – 52.5VDC 5 VDC 300mA 422.5mA 71 470uF MB4812XMD-1W5 43.2 – 52.5VDC 12 VDC 125mA 171.2mA 73 330uF MB4815XMD-1W5 43.2 – 52.5VDC 15 VDC 100mA 135.1mA 74 330uF Model Number Input Range MB0505XMD-1W5 MB0512XMD-1W5 Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40℃. (Ground fixed and controlled environment) 2. Maximum value at nominal input voltage and full load of standard type. 3. Typical value at nominal input voltage and full load. 4. Test by minimum Vin and constant resistive load. RECOMMENDED FOOTPRINT Single Output RECOMMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) Note: Unit:mm[inch] TUBE OUTLINE DIMENSIONS Pin section tolerances:±0.10mm[±0.004inch] General tolerances:±0.25mm[±0.010inch] FOOTPRINT DETAILS Pin Single 1 GND 2 Vin 3 +V0 4 NC 5 http://www.microdc.cn 0V Note: Unit :mm[inch] General tolerances: L=530mm[20.866inch] L=220mm[8.661inch] ±0.50mm[±0.020inch] Tube Quantity: 19pcs Tube Quantity: 7pcs When the environment temperature is higher than 71 71°°C, the product output ower should be less then 60% of the rated power. No parallel connection or plug and play. Use dual output simultaneously, forbid opening output pin (0V) to use as single output. Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 2