TOSHIBA U5FWJ2C48M

5FWJ2C48M,U5FWJ2C48M
TOSHIBA SCHOTTKY BARRIER RECTIFIER STACK SCHOTTKY BARRIER TYPE
5FWJ2C48M, U5FWJ2C48M
SWITCHING MODE POWER SUPPLY APPLICATON
CONVERTER & CHOPPER APPLICATION
Repetitive Peak Reverse Voltage
: VRRM = 30 V
Average Output Rectified Current
: IO = 5 A
Low Switching Losses and Output Noise
Unit: mm
U5FWJ2C48M
3±0.2
5FWJ2C48M
JEDEC
―
JEDEC
―
JEITA
―
JEITA
―
TOSHIBA
12-10D1A
TOSHIBA
12-10D2A
POLARITY
MAXIMUM RATINGS (Ta = 25°C)
CHARACTERISTIC
SYMBOL
RATING
UNIT
Repetitive Peak Reverse Voltage
VRRM
30
V
Average
IO
5
A
Output Rectified Current
50 (50Hz)
Peak One Cycle Surge Forward
Current (Sine Wave)
IFSM
Junction Temperature
Tj
−40~125
°C
Storage Temperature Range
Tstg
−40~150
°C
55 (60Hz)
1
A
2004-07-07
5FWJ2C48M,U5FWJ2C48M
ELECTRICAL CHARACTERISTICS (Ta = 25°C)
CHARACTERISTIC
SYMBOL
Peak Forward Voltage
TEST CONDITION
TYP.
MAX.
UNIT
VFM
IFM=2.5A
―
0.47
V
IRRM
VRRM=Rated
―
3.5
mA
Junction Capacitance
Cj
VR=10V, f=1.0MHz
138
―
pF
Thermal Resistance
Rth (j-c)
Total DC , Junction to Case
―
3.0
°C / W
Repetitive Peak Reverse
Current
VFM, IRRM, Cj : A value applied to one cell.
MARKING
Abbreviation Code
5FWJ2C
Characteristics
indicator
Part No. (or abbreviation code)
Lot No.
Part No.
5FWJ2C
5FWJ2C48M
5FWJ2C
U5FWJ2C48M
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
Handling Precaution
Schottky barrier diodes have reverse current characteristics compared to other diodes.
There is a possibility SBD may cause thermal runaway when it is used under high temperature or high voltage.
Please take forward and reverse loss into consideration during design.
The maximum ratings denote the absolute maximum ratings, which are rated values and must not be exceeded
during operation, even for an instant. The following are the general derating methods that we recommend when
you design a circuit with a device.
VRRM:
Use this rating with reference to the above. VRRM has a temperature coefficient of 0.1%/°C. Take
this temperature coefficient into account designing a device at low temperature.
I O:
We recommend that the worst case current be no greater than 80% of the maximum rating of IO and
Tj be below 100°C. When using this device, take the margin into consideration by using an
allowable Tamax-IO curve.
IFSM:
This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation,
which seldom occurs during the lifespan of the device.
Tj:
Derate this rating when using a device in order to ensure high reliability. We recommend that the
device be used at a Tj of below 100°C.
Please refer to the Rectifiers databook for further information.
2
2004-07-07
5FWJ2C48M,U5FWJ2C48M
3
2004-07-07
5FWJ2C48M,U5FWJ2C48M
4
2004-07-07
5FWJ2C48M,U5FWJ2C48M
RESTRICTIONS ON PRODUCT USE
030619EAA
• The information contained herein is subject to change without notice.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
• TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced
and sold, under any law and regulations.
5
2004-07-07