CYPRESS PALC22V10B

This is an abbreviated data sheet. Contact a Cypress
representative for complete specifications.
USE ULTRA37000™ FOR
ALL NEW DESIGNS
PALC22V10B
Reprogrammable CMOS PAL® Device
• Enhanced test features
Features
— Phantom array
• Advanced second generation PAL architecture
— Top test
• Low power
— Bottom test
— 90 mA max. standard
— Preload
— 100 mA max. military
• High reliability
• CMOS EPROM technology for reprogrammability
— Proven EPROM technology
• Variable product terms
— 100% programming and functional testing
— 2 x (8 through 16) product terms
• Windowed DIP, windowed LCC, DIP, LCC, PLCC
available
• User-programmable macrocell
— Output polarity control
— Individually selectable for registered or combinatorial operation
— 15 ns commercial and industrial
10 ns tCO
10 ns tS
15 ns tPD
50 MHz
Functional Description
The Cypress PALC22V10B is a CMOS second-generation
programmable logic array device. It is implemented with the
familiar sum-of-products (AND-OR) logic structure and a new
concept, the “Programmable Macrocell.”
The PALC22V10B is executed in a 24-pin 300-mil molded DIP,
a 300-mil windowed cerDIP, a 28-lead square ceramic
leadless chip carrier, a 28-lead square plastic leaded chip
carrier, and provides up to 22 inputs and 10 outputs. When the
windowed cerDIP is exposed to UV light, the 22V10B is erased
and can then be reprogrammed. The programmable macrocell
provides the capability of defining the architecture of each
output individually. Each of the 10 potential outputs may be
specified as “registered” or “combinatorial.” Polarity of each
output may also be individually
— 15 ns and “20 ns” military
10/15 ns tCO
10/17 ns tS
15/20 ns tPD
50/31 MHz
• Up to 22 input terms and 10 outputs
Logic Block Diagram (PDIP/CDIP)
VSS
I
12
11
I
I
I
I
I
I
I
I
I
CP/I
10
9
8
7
6
5
4
3
2
1
PROGRAMMABLE
ANDARRAY
(132X 44)
8
10
12
14
16
16
14
12
10
8
Macrocell
Macrocell
Macrocell
Macrocell
Macrocell
Macrocell
Macrocell
Macrocell
Macrocell
Reset
Macrocell
Preset
13
14
15
16
17
18
19
20
21
22
23
24
I
I/O9
I/O8
I/O7
I/O6
I/O5
I/O4
I/O3
I/O2
I/O1
I/O0
VCC
Cypress Semiconductor Corporation
Document #: 38-03018 Rev. *A
•
3901 North First Street
•
San Jose, CA 95134
•
408-943-2600
Revised April 22, 2004
PALC22V10B
USE ULTRA37000™ FOR
ALL NEW DESIGNS
PLCC
Top View
I
I
CP/I
N/C
VCC
I/O0
I/O1
I
I
CP/I
N/C
VCC
I/O0
I/O1
LCC
Top View
4 3 2 1 2827 26
I/O2
I/O3
I/O4
N/C
I/O5
I/O6
I/O7
I
I
I
N/C
I
I
I
5
6
7
8
9
10
11
25
24
23
22
21
20
121314 1516 171819
I/O2
I/O3
I/O4
N/C
I/O5
I/O6
I/O7
I
I
I
I
I
I
I/O9
I/O8
4 3 2 1 282726
25
24
23
22
21
20
19
12131415161718
I/O9
I/O8
5
6
7
8
9
10
11
VSS
N/C
I
I
I
N/C
I
I
I
VSS
N/C
Pin Configurations
Ultra37000 is a trademark of Cypress Semiconductor Corporation. PAL is a registered trademark of Advanced Micro Devices,
Inc. All products and company names mentioned in this document may be the trademarks of their respective holders.
Document #: 38-03018 Rev. *A
Page 2 of 3
© Cypress Semiconductor Corporation, 2004. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
USE ULTRA37000™ FOR
ALL NEW DESIGNS
PALC22V10B
Document History Page
Document Title: PALC22V10B Reprogrammable CMOS PAL® Device
Document Number: 38-03018
Issue Date
Orig. of
Change
REV.
ECN NO.
**
106318
05/08/01
SZV
Change from Spec number: 38-00195 to 38-03018
*A
213375
See ECN
FSG
Added note to title page: “Use Ultra37000 For All New Designs”
Document #: 38-03018 Rev. *A
Description of Change
Page 3 of 3