AH103 The Communications Edge TM High Gain, High Linearity ½ Watt Amplifier Outline Drawing Product Information Product Marking The component will be marked with an “AH103” designator followed by a four- or five-digit alphanumeric lot code on the top surface of the package. Tape and reel specifications for this part is located on the website in the “Application Notes” section. ESD / MSL Information ESD Classification: Value: Test: Standard: Class 1B Passes ! 500 V to < 1000 V Human Body Model (HBM) JEDEC Standard JESD22-A114 ESD Classification: Value: Test: Standard: Class IV Passes ! 1000 V Charged Device Model (CDM) JEDEC Standard JESD22-C101 MSL Rating: Standard: Level 1 at +250 °C convection reflow JEDEC Standard J-STD-020B Functional Pin Layout Mounting Configuration / Land Pattern Pin 1 2 3 4 5 6 7 8 Function Amp2 input Amp1 output / Bias Amp1 Ground RF input (Amp1 input) Ground RF output (Amp2 output) Bias Amp2 Ground The backside paddle is the Source and should be grounded for thermal and electrical purposes. All other pins should be grounded on the PCB. Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com September 2003