03W024A Melody sound source LSI for cellular phone BU8709KN Dimension (Unit : mm) 7.2 ± 0.1 7.0 ± 0.1 1.4 ± 0.1 0.6 +0.1 -0.3 36 0.1 8± 48 13 1 0.2 ± 0.05 0.05 M 12˚ Features 1) Simultaneous generation of up to 64 polyphonic tones out of a tone palette of 222 sounds 2) High-quality tone reproduction using Fs=44.1kHz, QFN48U two-voice method 3) 12bit pitch bending and modulation support 4) Stereo and monaural modes 5) Built-in equalizer (3 channels) and vibration function 6) Built-in LED (3 channels) 7) Built-in reverb function 8) Plays up to four songs simultaneously 9) Built-in ADPCM encoder (1 channel) and decoder (2 channel), enables mixing with melody 10)Select among µ-law, A-law, and linear input for encoder 11)Control from CPU using serial or parallel interface 12)Built-in FIFO for sound source and ADPCM to reduce CPU's processing load 13)Built-in graphic equalizer (7-band) 14)Supports digital output (standard format or IIS format) 15)Provides 1-Poly mode for low power consumption Applications Sound source for cellular phones and portable appliances Absolute Maximum Ratings (Ta=25˚C) Symbol Limits Unit Max. I/O supply voltage VDDIO –0.3 ~ 4.5 Max. CORE supply voltage VDDCO –0.3 ~ 3.5 V V Voltage applied to pin VIN DVSS–0.3 ~ VDDIO+3.5 V Input current IIN –1 ~ +1 µA Power dissipation Pd 500 Storage temperature range Tstg –50 ~ 125 mW ˚C Operating temperature range Topr –30 ~ 85 ˚C Conditions DVDD_IO, AVDD DVDD_CORE Warranty setting of single IC ∗Derating : 5.0mW/˚C for operation above Ta=25˚C February, 2003 12 12˚ 0.01+0.03 -0.007 0.6 ± 0.1 0.8 +0.2 -0.1 0 .1 .1 0 .3 + 0 5- 0.18 ± 0.05 24 7.2 ± 0.1 7.0 ± 0.1 4 0. 3- .1 0 .4 + 0 - 0.4 Parameter 25 37 55 0. Description BU8709KN is a melody sound source LSI for cellular phones. This LSI generates 64 high quality polyphonic tones through high sampling rate (fs=44.1KHz). 1 ADPCM encoder and 2 ADPCM decoders functions are embedded, providing mixing capabilities. It can customize output sounds by an equalizer function and display the signals by Graphic Equalizer. It also has Reverb function, as well as LED & Vib synchronization. 0.05 Recommended Operating Conditions (Ta=25˚C) Parameter Symbol Min. Typ. Max. Unit VDDIO 2.7 3.0 3.3 V DVDD_IO, AVDD CORE power supply voltage VDDCO 2.25 2.5 2.75 V DVDD_CORE Ambient temperature Ta –30 25 85 ˚C MCLK input frequency FMCLK 2.688 — 20 MHz SCLK input frequency MCLK duty FSCLK DMCLK — 40 — 50 20 60 MHz % ZAN 10 — — kΩ I/O power supply voltage Analog pin's load resistance Conditions Scale precision is approximately 0.2%. After DC Coupling Electrical characteristics (Unless otherwise noted, Ta=25˚C) Parameter Symbol Min. Typ. Max. Unit Conditions High-level input voltage VIH DVDD_IO-0.5 — — V Low-level input voltage VIL — — DVSS+0.5 V High-level input current IIH — — 1 µA VIH=VDDIO Low-level input current IIL VOH VOL –1 — — DVSS+0.3 µA V V VIL=DVSS — — — — VAGND VOUT 0.475AVDD 0.5AVDD 0.525AVDD 0.47AVDD 0.5AVDD 0.53AVDD V V VREF pin rise time <Analog pin characteristics> TRVR — 15 25 mS Analog amplitude VMAX — 1.8 — Vp-p <Digital DC characteristics> High-level output voltage Low-level output voltage <Analog DC characteristics> VREF pin voltage Analog pin voltage <General characteristics> DVDD_IO-0.3 IOH=–0.8mA IOH=0.8mA IOUT=0A (no load) IOUT=0A (no load) Not playing When CVREF=1µF, NRST=L→H Theoretical value for dynamic range Power consumption DVDD_CORE=2.5V, DVDD_IO=3.0V, AVDD=3.0V, internal operation frequency SYS_CLK=50MHz AIDD1 DIDD10 — — 1.5 28 2.5 35 mA mA Playing Digital Idd 10 Digital Idd 11 (DVDD_CORE) DIDD11 — 56 65 mA Playing 64POLY Digital Idd 12 (DVDD_IO) Analog Idd 2 Digital Idd 20 (DVDD_CORE) Digital Idd 21 (DVDD_IO) DIDD12 AIDD2 DIDD20 DIDD21 — — — — 0.4 — — — 1 1 10 5 mA µA µA µA Playing Standby mode Standby mode Standby mode Analog Idd 1 Not playing MIDI CLK control="101" Block Diagram MIDI Core Sequencer Core LED 3ch/VIB LED 3ch/VIB D7~D0 MIDI FIFO IFSEL CPU Sequencer Sequencer CPU DLS Parameter SO(/WR) Each ch Status L/R Output FIFO MIDI DSP Voice Parameter Work RAM Work RAM SIO(/AO) CPU I/F Wave Table ROM UCS RAM INT Wave ROM Mixing & Over Sampling OverSampling Hard Logic for MIDI Wave Table ROM SEL(/CS) LED, VIB Control LED1~3 VIB Graphic Equalizer To CPU I/F Block Digital Output Work RAM Program ROM SCLK(/RD) Parametric Equalizer parameter Program ROM Format Standard/IIS D/A Converter D Digital filter D ADPCM Encoder & Decoder DSP Clock control test TESTMODE 0~2 TESTBUS 0~5 44.1kHz/24kHz Timing Generator PLL PLL_FILTER MCLK test Slave ch FIFO D MONO_OUT D E E Slave ch EIEN EIDT EICK Master ch Encoder FIFO VREF L_OUT R_OUT ADPCM Core NRST DIGLR DIGDT DIGCK