TLW.79.. Vishay Telefunken TELUX Color Red Yellow Type TLWR79.. TLWY79.. Technology AlInGaP on GaAs AlInGaP on GaAs Angle of Half Intensity ±ö 45° 45° Description The TELUX series is a clear, non diffused LED for high end applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing highly developed (AS) AllnGaP technology. The supreme heat dissipation of TELUX allows applications at high ambient temperatures. All packing units are binned for luminous flux and color to achieve best homogenous light appearance in application. 16 012 Features D D D D D Utilizing (AS) AllnGaP technology High luminous flux Supreme heat dissipation: RthJP is 90 K/W High operating temperature: Tj up to + 125 °C Type TLWR meets SAE and ECE color requirements D Packed in tubes for automatic insertion D Luminous flux and color categorized for each tube D Small mechanical tolerances allow precise usage of external reflectors or lightguides D TLWR types additionally forward voltage categorized Applications Exterior lighting Dashboard illumination Tail–, Stop – and Turn Signals of motor vehicles Replaces incandescant lamps Traffic signals and signs Document Number 83144 Rev. 2, 09-Jun-00 www.vishay.de • FaxBack +1-408-970-5600 1 (7) TLW.79.. Vishay Telefunken Absolute Maximum Ratings Tamb = 25_C, unless otherwise specified TLWR79.. ,TLWY79.. , Parameter Reverse voltage DC forward current Surge forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction/ambient Test Conditions IR = 100mA Tamb ≤ 85°C tp ≤ 10 ms Tamb ≤ 85°C Type TLWR79 TLWR79.. TLWY79 TLWY79.. Symbol Value VR 10 IF 70 IFSM 1 S PV 187 Tj 125 Tamb –40 to +110 t ≤ 5 s, 1.5 mm from body preheat temperature 100°C/ 30sec. with cathode heatsink of 70 mm2 Unit V mA A mW °C °C Tstg Tsd –55 to +110 260 °C °C RthJA 200 K/W Optical and Electrical Characteristics Tamb = 25_C, unless otherwise specified Red (TLWR79.. ) Parameter Total flux Luminous intensity/ Total flux Dominant wavelength Peak wavelength Angle of half intensity Total included angle Forward voltage Reverse voltage Junction capacitance Test Conditions Type IF = 70 mA, RthJA=200 °K/W Symbol Min 1500 Typ 2000 0.7 Max 3000 Unit mlm mcd/mlm ld lp 611 615 624 ±45 100 2.2 20 17 634 nm nm deg deg V V pF fV IV/fV ϕ ϕ0.9V VF VR Cj 90 % of Total Flux Captured IF = 70 mA, RthJA=200 °K/W IR = 100 mA VR = 0, f = 1 MHz 1.83 10 2.67 Yellow (TLWY79.. ) Parameter Total flux Luminous intensity/ Total flux Dominant wavelength Peak wavelength Angle of half intensity Total included angle Forward voltage Reverse voltage Junction capacitance Test Conditions IF = 70 mA, RthJA=200 °K/W Type Symbol Min 1000 Typ 1400 0.7 Max 2400 Unit mlm mcd/mlm ld lp 585 590 594 ±45 100 2.1 15 32 597 nm nm deg deg V V pF fV IV/fV ϕ 90 % of Total Flux Captured IF = 70 mA, RthJA=200 °K/W IR = 100 mA VR = 0, f = 1 MHz www.vishay.de • FaxBack +1-408-970-5600 2 (7) ϕ0.9V VF VR Cj 1.83 10 2.67 Document Number 83144 Rev. 2, 09-Jun-00 TLW.79.. Vishay Telefunken Typical Characteristics (Tamb = 25_C, unless otherwise specified) 0° 10° 20° 30° 175 I v rel – Relative Luminous Intensity PV – Power Dissipation ( mW ) 200 Red Yellow 150 125 100 75 50 25 RthJA=200K/W 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 0 0 20 40 60 80 100 120 Tamb – Ambient Temperature ( °C ) 15982 0.6 Figure 1 Power Dissipation vs. Ambient Temperature 0.6 100 Red Yellow 90 80 80 % Total Luminous Flux I F – Forward Current ( mA ) 0.2 0 0.2 0.4 Angular Displacement Figure 4 Rel. Luminous Intensity vs. Angular Displacement 100 60 40 20 70 60 50 40 30 20 10 RthJA=200K/W 0 0 0 20 40 60 80 100 120 Tamb – Ambient Temperature ( °C ) 15983 0 10000 1000 Red Yellow tp/T=0.01 Tamb 75 100 125 230 Padsize 8 mm2 per Anode Pin 220 0.02 210 RthJA in K/W 0.1 100 1 200 190 180 0.2 0.5 50 Figure 5 Percentage total Luminous Flux vs. Total Included Angle (Degrees) v85°C 0.05 10 25 Total Included Angle (Degrees) 16201 Figure 2 Forward Current vs. Ambient Temperature IF – Forward Current ( mA ) 0.4 16200 170 1 0.01 16010 160 0.1 1 10 100 tp – Pulse Length ( ms ) Figure 3 Forward Current vs. Pulse Length Document Number 83144 Rev. 2, 09-Jun-00 0 16009 50 100 150 200 Cathode Padsize in 250 300 mm2 Figure 6 Thermal Resistance Junction Ambient vs. Cathode Padsize www.vishay.de • FaxBack +1-408-970-5600 3 (7) TLW.79.. Vishay Telefunken 100 Red I Vrel– Relative Luminous Flux 90 10.00 I F – Forward Current ( mA ) 80 70 60 50 40 30 20 Red 1.00 0.10 10 0 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 VF – Forward Voltage ( V ) 15974 0.01 1 Figure 7 Forward Current vs. Forward Voltage 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 –40 –20 0 20 40 60 80 100 Tamb – Ambient Temperature ( °C ) 15976 1.2 Red IF = 70 mA 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 570 580 590 600 610 620 630 640 650 660 670 I Vrel– Relative Luminous Intensity FVrel – Relative Luminous Flux 1.6 IF = 70 mA l – Wavelength ( nm ) 16007 Figure 8 Rel. Luminous Flux vs. Ambient Temperature 100 Figure 10 Relative Luminous Flux vs. Forward Current 1.8 Red 10 IF – Forward Current ( mA ) 15978 Figure 11 Relative Luminous Intensity vs. Wavelength 100 1.0 0.1 1 15980 90 10 Figure 9 Specific Luminous Flux vs. Forward Current www.vishay.de • FaxBack +1-408-970-5600 4 (7) 70 60 50 40 30 20 10 0 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 100 IF – Forward Current ( mA ) Yellow 80 I F – Forward Current ( mA ) I Spec– Specific Luminous Flux Red 15975 VF – Forward Voltage ( V ) Figure 12 Forward Current vs. Forward Voltage Document Number 83144 Rev. 2, 09-Jun-00 TLW.79.. Vishay Telefunken 1.8 10.00 Yellow IF = 70 mA Yellow I Vrel– Relative Luminous Flux FVrel – Relative Luminous Flux 2.0 1.6 1.4 1.2 1.0 0.8 0.6 0.4 –20 0 20 40 60 80 15979 Figure 13 Specific Luminous Flux vs. Forward Current 1.0 10 100 IF – Forward Current ( mA ) Figure 14 Specific Luminous Flux vs. Forward Current Document Number 83144 Rev. 2, 09-Jun-00 10 100 IF – Forward Current ( mA ) Figure 15 Relative Luminous Flux vs. Forward Current I Vrel– Relative Luminous Intensity Yellow 0.1 1 0.01 1 100 Tamb – Ambient Temperature ( °C ) 15977 I Spec– Specific Luminous Flux 0.10 0.2 0 –40 15981 1.00 16008 1.2 Yellow IF = 70 mA 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 540 550 560 570 580 590 600 610 620 630 640 l – Wavelength ( nm ) Figure 16 Relative Luminous Intensity vs. Wavelength www.vishay.de • FaxBack +1-408-970-5600 5 (7) TLW.79.. Vishay Telefunken Dimensions in mm 15984 www.vishay.de • FaxBack +1-408-970-5600 6 (7) Document Number 83144 Rev. 2, 09-Jun-00 TLW.79.. Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 Document Number 83144 Rev. 2, 09-Jun-00 www.vishay.de • FaxBack +1-408-970-5600 7 (7)