Imaging D A T A S H E E T Lighting Telecom Cermax® Xenon Arc Lamps PE125B-10F and PE125B-10UV CERMAX® FOCUSED XENON ARC LAMPS Description The Cermax® xenon arc lamp is an innovative lamp design in the specialty lighting industry. These lamps were introduced in the early 1980’s and are now used in endoscopes in most major hospitals worldwide, in high brightness projection display systems, and for a wide variety of other high performance applications. Applications pulses are advised because radio frequency starters may damage the lamps internal reflector. In addition to lamps, PerkinElmer Optoelectronics manufactures Cermax® arc lamp power supplies, lamp holders, OEM lighting systems, and fiber optic light sources. • Medical and industrial fiber optic illu- • • • • • • minators Machine vision Infrared and visible spotlights/beacons Spectroscopy Microscopy UV Curing Video projection The PE125B-10F and PE125B-10UV Cermax® lamps have an integrated elliptical reflector, enabling high intensity, focused output of ultraviolet, visible, and infrared radiation. With their internal reflector and rugged ceramic body construction, Cermax® lamps are the safest and most compact alternative to conventional quartz xenon lamps. This makes them ideal for applications that require a high degree of illumination control. Current-regulated or power-regulated power supplies with output ripples of less than 5% are recommended. Single shot ignition . www.perkinelmer.com/opto PE125B-10F and PE125B-10UV Operational Specifications Description Physical Specifications Nominal Range Description Specification Power 125 watts 75-150 watts Arc Gap Current 11.5 amps (DC) .038 inch (0.96mm) Ellipsoidal 1= X2/M2 +Y2/N2 7-14 amps (DC) Reflector Geometry 10-12.5 volts (DC) Weight 150 grams Window Diameter 1 inch (25.4 mm) Operating Voltage 11 volts (DC) Ignition Voltage 23 kilovolts (recommended minimum) Temperature 150º C (maximum) Lifetime* 1000 hours (500 hour warranty) * End of lamp life is defined as 50% of initial output. Output at Nominal Power F= UV Filtered Output/ UV = UV Enhanced Output Focused Output Description Visible Output* 6mm aperture 1250 Lumens 11 watts 3mm aperture 650 Lumens 6.4 watts * Nominal values at 125 watts after 2 hour burn-in Description PE125B-10F PE125B-10UV Radiant Output* 18.5 watts 18.5 watts UV Output* 1.1 watts 2.7 watts IR Output* 10.3 watts 9.7 watts Visible Output* 1570 Lumens Color Temperature 5900 Kelvin Peak Instabilities 4% 4% Notes 1. Lamp must not be operated with window facing upwards within 45º of vertical. 1400 Lumens 2. Seal temperature must not exceed 150º C. 5050 Kelvin 3. Current/power regulated power supplies and PerkinElmer lamp housing units are recommended. 4. Lamp must be operated within recommended current and power range. Over powering may lead to arc instability, hard starting and premature aging. 5. Hot mirror assembly is available for IR filtering. 6. CERMAX lamps are much safer lamps to use than their quartz xenon arc lamp equivalents. However, caution must be practiced when operating lamps because they are under high pressure, require high voltage, reach temperatures up to 200º C, and their IR and UV radiation can cause skin burns and eye damage. Read hazard sheet included with each lamp shipment. Spot Size at Crossover .09” at 50% pts 0.9” at 50% pts Spot Size at Crossover .23” at 10% pts .23” at 10% pts *These values indicate total output in all directions. Wavelengths = UV<390nm, IR>770nm, Visible 390nm to 770nm. ** Beam Geometry defined as half angle at 10% PTS after 01/100/1000 hours. Dimensions 1.00 (25.4) .250 (6.35) 1.00 (25.4) Total Output .55 (13.97) .25 (6.35) Spectral Output .165 (4.19) F 6-32 UNC 2B x .156 DP 3 Holes EQ SP on A .750 (19.05) BC 2 x .40 (10.2) .035 (.899) 1.298 (32.97) 2.167 (55.04) .866 (21.99) .008 (.203) M=1.059 N=0.50 .126 (3.2) RELATIVE OUTPUT 100 UV F + HOT MIRROR 80 60 40 20 Focal Point Reflector Edge Cathode 0 200 C L Ellipse 300 400 500 600 700 800 900 1000 1100 WAVELENGTH (NM) Dimensions in parentheses are in millimeters. PerkinElmer welcomes inquiries about special lamps. We would be pleased to discuss the requirements of your application and the feasibility of designing a lamp specifically suited to your needs. For more information e-mail us at [email protected] or visit our web site at www.perkinelmer.com/opto. All values are nominal; specifications subject to change without notice. USA: PerkinElmer Optoelectronics 44370 Christy St. Fremont, CA 94538 Phone: (510) 979-6500 Fax: (510) 687-1140 Toll Free: (800) 775-6786 Europe: PerkinElmer Optoelectronics GmbH Wenzel-Jaksch-Str. 31 65199 Wiesbaden Germany Phone: +49 611 492 0 Fax: +49 611 492 369 Asia: PerkinElmer Optoelectronics 47 Ayer Rajah Crescent #06-12 Singapore 139947 Phone: +65 775 2022 Fax: +65 775 1008 © 2000 PerkinElmer inc. All rights reserved. . DS-162 Rev C 1101 www.perkinelmer.com/opto