Imaging D A T A S H E E T Lighting Telecom Cermax® Xenon Arc Lamps PE1000DF and PE1000DUV CERMAX® XENON ARC LAMPS Description The Cermax® xenon arc lamp is an innovative lamp design in the specialty lighting industry. These lamps were introduced in the early 1980’s and are now used in endoscopes in most major hospitals worldwide, in high brightness projection display systems, and for a wide variety of other high performance applications. Applications pulses are advised because radio frequency starters may damage the lamps internal reflector. In addition to lamps, PerkinElmer Optoelectronics manufactures Cermax® arc lamp power supplies, lamp holders, OEM lighting systems, and fiber optic light sources. • Medical and industrial fiber optic illu- • • • • • • minators Machine vision Infrared and visible spotlights/beacons Spectroscopy Microscopy UV Curing Video projection The PE1000DF and PE1000DUV Cermax® lamps have an integrated parabolic reflector, enabling high intensity, focused output of ultraviolet, visible, and infrared radiation. With their internal reflector and rugged ceramic body construction, Cermax® lamps are the safest and most compact alternative to conventional quartz xenon lamps. This makes them ideal for applications that require a high degree of illumination control. Current-regulated or power-regulated power supplies with output ripples of less than 5% are recommended. Single shot ignition . www.perkinelmer.com/opto PE1000BF and PE1000BUV Operational Specifications Physical Specifications Description Nominal Range Description Specification Power 1000 watts 820-1050 watts Arc Gap .09 inch (2.28mm) Parabolic Y2 = 0.8 X (inch) Current 51 amps (DC) 46-54 amps (DC) Reflector Geometry Operating Voltage 19.5 volts (DC) 18.5-22 volts (DC) Weight 680 grams Ignition Voltage 35 kilovolts (recommended minimum) Window Diameter 2 inch (50.8 mm) Temperature 150º C (maximum) Lifetime* 1000 hours (500 hour warranty) * End of lamp life is defined as 50% of initial output. Output at Nominal Power F= UV Filtered Output/ UV = UV Enhanced Output Description Focused Output at F/1.0 Lens Description Visible Output 6mm aperture 10400 Lumens 96 watts 8mm aperture 4600 Lumens 44 watts * Nominal values at 1000 watts after 2 hour burn-in. Peak Intensity PE1000DF 38x105 candelas PE1000DUV 27x105 candelas Radiant Output* 250 watts 250 watts UV Output* 13 watts 25 watts IR Output* 137 watts Visible Output* 24000 Lumens Color Temperature 5600 Kelvin 5050 Kelvin Peak Instabilities 4% 4% Beam Geometry** 4º/5º/6º 4º/5º/6º Notes 1. Lamp must not be operated with window facing upwards within 45º of vertical. 133 watts 2. Seal temperature must not exceed 150º C. 22000 Lumens 3. Current/power regulated power supplies and PerkinElmer lamp housing units are recommended. 4. Lamp must be operated within recommended current and power range. Over powering may lead to arc instability, hard starting and premature aging. 5. CERMAX lamps are much safer lamps to use than their quartz xenon arc lamp equivalents. However, caution must be practiced when operating lamps because they are under high pressure, require high voltage, reach temperatures up to 200º C, and their IR and UV radiation can cause skin burns and eye damage. Read hazard sheet included with each lamp shipment. *These values indicate total output in all directions. Wavelengths = UV<390nm, IR>770nm, Visible 390nm to 770nm. ** Beam Geometry defined as half angle at 10% PTS after 01/100/1000 hours. Dimensions 2.00 (50.8) .04 (1.02) .250 (6.35) Total Output* 2.00 (50.8) Spectral Output .22 (5.59) F 2 x .60 (15.2) 8-32 UNC 2B x .25 DP 3 Holes EQ SP on A 1.60 (40.64) BC .273 (6.93) 2.858 (72.59) 2.592 (65.84) .066 (1.52) .20 (5.08) RELATIVE OUTPUT 100 UV F + HOT MIRROR 80 60 40 20 Y X 0 200 300 400 500 600 700 800 900 1000 1100 WAVELENGTH (NM) Focal Point Cathode PerkinElmer welcomes inquiries about special lamps. We would be pleased to discuss the requirements of your application and the feasibility of designing a lamp specifically suited to your needs. For more information e-mail us at [email protected] or visit our web site at www.perkinelmer.com/opto. All values are nominal; specifications subject to change without notice. USA: PerkinElmer Optoelectronics 44370 Christy St. Fremont, CA 94538 Phone: (510) 979-6500 Fax: (510) 687-1140 Toll Free: (800) 775-6786 Europe: PerkinElmer Optoelectronics GmbH Wenzel-Jaksch-Str. 31 65199 Wiesbaden Germany Phone: +49 611 492 0 Fax: +49 611 492 369 Asia: PerkinElmer Optoelectronics 47 Ayer Rajah Crescent #06-12 Singapore 139947 Phone: +65 775 2022 Fax: +65 775 1008 . DS-153 Rev C 1101 © 2000 PerkinElmer inc. All rights reserved. www.perkinelmer.com/opto