HMC244G16 v01.0404 MICROWAVE CORPORATION GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz Typical Applications Features The HMC244G16 is ideal for: Low Insertion Loss: 0.7 dB • Telecom Infrastructure Non-Reflective Design • Military Radios, Radar & ECM Integrated 2:4 TTL Decoder • Space Applications Single Positive Suppy: Vdd = +5V • Test Instrumentation 16 Lead Hermetic SMT Package Functional Diagram General Description The HMC244G16 is a non-reflective SP4T switch in a 16 lead glass/metal (hermetic) package. Covering DC to 4.0 GHz, the switch offers 30~50 dB isolation and a low insertion loss of 0.7 dB through 3 GHz. A 2:4 TTL/CMOS compatable decoder is integrated on the switch requiring only 2 control lines and a positive 5V bias to select each path, replacing 8 control lines normally required by GaAs SP4T switches. SWITCHES - SMT 14 14 - 128 Electrical Specifications, TA = +25° C, With 0/+5V Control, 50 Ohm System Parameter Frequency Insertion Loss DC - 1.0 GHz DC - 3.0 GHz DC - 3.5 GHz DC - 4.0 GHz Isolation DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz DC - 4.0 GHz Min. 40 36 30 24 Typ. Max. Units 0.6 0.7 1.0 1.4 0.9 1.0 1.4 1.8 dB dB dB dB 45 40 35 28 dB dB dB dB Return Loss “On State” DC - 3.5 GHz DC - 4.0 GHz 18 13 dB dB Return Loss RF 1 -4 “Off State” 0.2 - 4.0 GHz 0.5 - 4.0 GHz 10 15 dB dB Input Power for 1 dB Compression 0.5 - 4.0 GHz 21 25 dBm Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) 0.5 - 3.0 GHz 0.5 - 4.0 GHz 43 40 47 43 dBm dBm Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) DC - 4.0 GHz 40 150 ns ns For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC244G16 v01.0404 MICROWAVE CORPORATION GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz GaAs MMIC Insertion Loss SUB-HARMONICALLY Isolation PUMPED MIXER 17 - 25 GHz 0 0 ISOLATION (dB) -1 -2 -30 -40 -50 + 25C - 40C + 85C -60 -3 -70 0 0.5 1 1.5 2 2.5 FREQUENCY (GHz) 3 3.5 4 Return Loss 0 0.5 1 1.5 2 2.5 FREQUENCY (GHz) 3.5 4 14 30 INPUT P1dB (dBm) RFC RF1, RF2, RF3, RF4 ON RF1, RF2, RF3, RF4 OFF -5 -10 -15 25 20 1 dB COMPRESSION 0.1 dB COMPRESSION 15 -20 -25 10 0 0.5 1 1.5 2 2.5 FREQUENCY (GHz) 3 3.5 4 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) 3.5 Bias Voltage & Current Input Third Order Intercept Point 60 Vdd Range= +5.0 Vdc ±10% 55 + 25C + 85C INPUT IP3 (dBm) 3 0.1 and 1 dB Input Compression Point 0 RETURN LOSS (dB) RF1 RF2 RF3 RF4 -20 - 40C 50 45 Vdd (Vdc) Idd (Typ) (mA) Idd (Max) (mA) +5.0 3.0 7.0 4 SWITCHES - SMT INSERTION LOSS (dB) -10 TTL/CMOS Control Voltages 40 35 30 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) 3.5 State Bias Condition Low 0 to +0.8 Vdc @ 5 uA Typ. High +2.0 to +5.0 Vdc @ 70 uA Typ. 4 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 14 - 129 HMC244G16 v01.0404 MICROWAVE CORPORATION GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz Absolute Maximum Ratings Truth Table Bias Voltage Range (Port Vdd) +7.0 Vdc Control Voltage Range (A & B) -0.5V to Vdd +1 Vdc Channel Temperature 150 °C Control Input Signal Path State A Thermal Resistance (Insertion Loss Path) 210 °C/W Thermal Resistance (Terminated Path) 250 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Maximum Input Power Vdd = +5 Vdc +20 dBm (0.05 - 0.5 GHz) +27 dBm (0.5 - 3.5 GHz) B RF COM to: Low Low RF1 High Low RF2 Low High RF3 High High RF4 Outline Drawing 14 NOTES: 1. PACKAGE MATERIAL: ALUMINA LOADED BOROSILICATE GLASS. SWITCHES - SMT 2. LEAD, BASE, COVER MATERIAL: KOVAR™ 14 - 130 (#7052 CORNING). 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 75 MICROINCHES MIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES: ±.005 [0.13] UNLESS OTHERWISE SPECIFIED. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Pin Descriptions Pin Number Function Description 1, 3, 5, 10, 12, 13, 14, 16 GND Package bottom has exposed metal paddle that must also be connected to PCB RF ground. 2, 4, 9, 11, 15 RF4, RF3, RF2, RF1, RFC These pins are DC coupled and matched to 50 Ohms. Blocking capacitors are required. 6 Vdd Supply Voltage +5.0 Vdc ±10% 7 B See truth table and control voltage table. 8 A See truth table and control voltage table. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0404 HMC244G16 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz Evaluation PCB List of Material Item Description J1 - J5 PC Mount SMA RF Connector J6 - J8 DC Pin C1 - C5 330 pF Capacitors, 0402 Pkg. U1 HMC244G16 SP4T Switch PCB* 103137 Evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. SWITCHES - SMT 14 * Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 14 - 131