JDV3C11 TOSHIBA Diode Silicon Epitaxial Planar Type JDV3C11 Electronic Tuning Applications of FM Receivers · High capacitance ratio: C1V/C4.5V = 5.3 (typ.) · Low series resistance: rs = 0.4 Ω (typ.) · Two diodes in a single package Unit: mm Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Reverse voltage VR 20 V Junction temperature Tj 125 °C Tstg -55~125 °C Storage temperature range JEDEC ― JEITA SC-59 TOSHIBA 1-3G1F Weight: 0.013 g (typ.) 1 2002-01-23 JDV3C11 Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Reverse voltage VR IR = 1 mA 20 ¾ ¾ V Reverse current IR VR = 20 V ¾ ¾ 10 nA VR = 1 V, f = 1 MHz 65.8 ¾ 74.2 VR = 4.5 V, f = 1 MHz 11.5 ¾ 14.3 5 5.3 ¾ ¾ ¾ 0.4 0.6 W C1V Capacitance C4.5V Capacitance ratio C1V/C4.5V Series resistance rs ¾ VR = 1.5 V, f = 100 MHz pF Note 1: Signal level when capacitance is measured. Vsig = 20 mVrms Note 2: Electrical characteristics shown in the above are between anode 1 and cathode, between anode 2 and cathode. Marking FF 2 2002-01-23 JDV3C11 CV – VR rs – VR 100 0.6 f = 1 MHz f = 100 MHz Vsig = 20 mVrms Series resistance rs Capacitance CV (pF) (9) 0.5 10 0.4 0.3 0.2 0.1 1 0 1 2 3 4 5 6 Reverse voltage VR 7 8 9 0 0.1 10 (V) 1 Reverse voltage VR 3 10 (V) 2002-01-23 JDV3C11 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 4 2002-01-23