AD ADG1204YRUZ

Low Capacitance, Low Charge Injection,
±15 V/+12 V, 4:1 iCMOS Multiplexer
ADG1204
FEATURES
FUNCTIONAL BLOCK DIAGRAM
1.5 pF off source capacitance
<1 pC charge injection
33 V supply range
120 Ω on resistance
Fully specified at ±15 V, +12 V
No VL supply required
3 V logic-compatible inputs
Rail-to-rail operation
14-lead TSSOP and 12-lead LFCSP_VQ
Typical power consumption < 0.03 μW
ADG1204
S1
S2
D
S3
S4
A0
A1
EN
04779-001
1 OF 4
DECODER
Figure 1.
APPLICATIONS
Automatic test equipment
Data acquisition systems
Battery-powered systems
Sample-and-hold systems
Audio signal routing
Video signal routing
Communication systems
GENERAL DESCRIPTION
The ADG1204 is a complementary metal-oxide semiconductor
(CMOS) analog multiplexer, comprising four single channels
designed on an iCMOS (industrial CMOS) process. iCMOS® is
a modular manufacturing process that combines high voltage
CMOS and bipolar technologies. It enables the development of
a wide range of high performance analog ICs capable of 33 V
operation in a footprint that no previous generation of high
voltage parts has been able to achieve. Unlike analog ICs using
conventional CMOS processes, iCMOS components can tolerate
high supply voltages while providing increased performance,
dramatically lower power consumption, and reduced package size.
The ultralow capacitance and charge injection of this multiplexer
makes it an ideal solution for data acquisition and sample-andhold applications, where low glitch and fast settling are required.
Fast switching speed coupled with high signal bandwidth makes
the part suitable for video signal switching. iCMOS construction
ensures ultralow power dissipation, making the part ideally
suited for portable and battery-powered instruments.
The ADG1204 switches one of four inputs to a common output,
D, as determined by the 3-bit binary address lines: A0, A1, and
EN. Logic 0 on the EN pin disables the device. Each switch
conducts equally well in both directions when on and has an
input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked. All switches
exhibit break-before-make switching action.
PRODUCT HIGHLIGHTS
1.
2.
3.
4.
5.
6.
1.5 pF off capacitance (±15 V supply).
<1 pC charge injection.
3 V logic-compatible digital inputs: VIH = 2.0 V, VIL = 0.8 V.
No VL logic power supply required.
Ultralow power dissipation: <0.03 μW.
14-lead TSSOP and 12-lead, 3 mm × 3 mm LFCSP_VQ
packages.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2005–2009 Analog Devices, Inc. All rights reserved.
ADG1204
TABLE OF CONTENTS
Features .............................................................................................. 1 ESD Caution...................................................................................7 Applications ....................................................................................... 1 Pin Configurations and Function Descriptions ............................8 Functional Block Diagram .............................................................. 1 Truth Table .....................................................................................8 General Description ......................................................................... 1 Typical Performance Characteristics ..............................................9 Product Highlights ........................................................................... 1 Test Circuits ..................................................................................... 12 Specifications..................................................................................... 3 Terminology .................................................................................... 14 Dual Supply ................................................................................... 3 Outline Dimensions ....................................................................... 15 Single Supply ................................................................................. 5 Ordering Guide .......................................................................... 15 Absolute Maximum Ratings............................................................ 7 REVISION HISTORY
2/09—Rev. A to Rev. B
Changes to Power Requirements, IDD, Digital Inputs = 5 V
Parameter, Table 1............................................................................. 4
Changes to Power Requirements, IDD, Digital Inputs = 5 V
Parameter, Table 2............................................................................. 6
Updated Outline Dimensions ....................................................... 15
7/06—Rev. 0 to Rev. A
Updated Format .................................................................. Universal
Changes to Table 1 ............................................................................ 3
Changes to Table 2 ............................................................................ 5
Changes to the Terminology Section ........................................... 14
7/05—Revision 0: Initial Version
Rev. B | Page 2 of 16
ADG1204
SPECIFICATIONS
DUAL SUPPLY
VDD = 15 V ± 10%, VSS = −15 V ± 10%, GND = 0 V, unless otherwise noted.
Table 1.
Parameter
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
On Resistance Match Between
Channels (ΔRON)
On Resistance Flatness (RFLAT(ON))
25°C
Y Version 1
−40°C to
+85°C
VDD to VSS
120
190
3.5
6
20
57
230
260
10
12
72
79
LEAKAGE CURRENTS
Source Off Leakage, IS (OFF)
±0.02
±0.6
Drain Off Leakage, ID (OFF)
±0.1
±0.02
±0.1
±0.02
±0.2
Channel On Leakage, ID, IS (ON)
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current, IINL or INH
−40°C to
+125°C
V
Ω typ
Ω max
Ω typ
Ω max
Ω typ
Ω max
VS = ±10 V, VD = ∓10 V; see Figure 22
nA max
nA typ
VS = ±10 V, VD = ∓10 V; see Figure 22
±0.6
±1
VS = VD = ±10 V; see Figure 23
±0.6
±1
nA max
nA typ
nA max
V min
V max
μA typ
μA max
pF typ
VIN = VINL or VINH
2.0
0.8
0.005
2.5
Break-Before-Make Time Delay, tD
Charge Injection
Off Isolation
Channel-to-Channel Crosstalk
Total Harmonic Distortion + Noise
−0.7
85
80
0.15
Bandwidth −3 dB
CS (OFF)
800
1.2
1.5
3.6
4.2
5.5
6.5
MHz typ
pF typ
pF max
pF typ
pF max
pF typ
pF max
180
200
100
110
135
155
10
CD (OFF)
CD, CS (ON)
VS = −5 V, 0 V, +5 V; IS = −1 mA
±1
ns typ
ns max
ns typ
ns max
ns typ
ns max
ns typ
ns min
pC typ
dB typ
dB typ
% typ
tOFF (EN)
VS = ±10 V, IS = −1 mA; see Figure 21
VDD = +13.5 V, VSS = −13.5 V
VS = ±10 V, IS = −1 mA
VDD = +16.5 V, VSS = −16.5 V
120
150
70
85
90
110
25
tON (EN)
Test Conditions/Comments
nA typ
±0.1
Digital Input Capacitance, CIN
DYNAMIC CHARACTERISTICS 2
Transition Time, tTRANS
Unit
Rev. B | Page 3 of 16
RL = 300 Ω, CL = 35 pF
VS = 10 V; see Figure 24
RL = 300 Ω, CL = 35 pF
VS = 10 V; see Figure 26
RL = 300 Ω, CL = 35 pF
VS = 10 V; see Figure 26
RL = 300 Ω, CL = 35 pF
VS1 = VS2 = 10 V; see Figure 25
VS = 0 V, RS = 0 Ω, CL = 1 nF; see Figure 27
RL = 50 Ω, CL = 5 pF, f = 1 MHz; see Figure 28
RL = 50 Ω, CL = 5 pF, f = 1 MHz; see Figure 30
RL = 10 kΩ, 5 V rms, f = 20 Hz to 20 kHz;
see Figure 31
RL = 50 Ω, CL = 5 pF; see Figure 29
f = 1 MHz, VS = 0 V
f = 1 MHz, VS = 0 V
f = 1 MHz, VS = 0 V
f = 1 MHz, VS = 0 V
f = 1 MHz, VS = 0 V
f = 1 MHz, VS = 0 V
ADG1204
Parameter
POWER REQUIREMENTS
IDD
25°C
Y Version 1
−40°C to
+85°C
−40°C to
+125°C
0.001
1.0
IDD
170
285
ISS
0.001
1.0
ISS
0.001
1.0
1
2
Y version temperature range is −40°C to +125°C.
Guaranteed by design, not subject to production test.
Rev. B | Page 4 of 16
Unit
μA typ
μA max
μA typ
μA max
μA typ
μA max
μA typ
μA max
Test Conditions/Comments
VDD = +16.5 V, VSS = −16.5 V
Digital inputs = 0 V or VDD
Digital inputs = 5 V
Digital inputs = 0 V or VDD
Digital inputs = 5 V
ADG1204
SINGLE SUPPLY
VDD = 12 V ± 10%, VSS = 0 V, GND = 0 V, unless otherwise noted.
Table 2.
Parameter
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
On Resistance Match Between Channels
(ΔRON)
On Resistance Flatness (RFLAT(ON))
LEAKAGE CURRENTS
Source Off Leakage, IS (OFF)
Drain Off Leakage, ID (OFF)
Channel On Leakage, ID, IS (ON)
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current, IINL or IINH
25°C
Y Version 1
−40°C to
−40°C to
+85°C
+125°C
0 V to VDD
300
475
5
16
60
±0.02
±0.1
±0.02
±0.1
±0.02
±0.2
567
625
26
27
±0.6
±1
±0.6
±1
±0.6
±1
2.0
0.8
0.001
±0.1
Digital Input Capacitance, CIN
DYNAMIC CHARACTERISTICS 2
Transition Time, tTRANS
2.5
Unit
V
Ω typ
Ω max
Ω typ
Ω max
Ω typ
nA typ
nA max
nA typ
nA max
nA typ
nA max
V min
V max
μA typ
μA max
pF typ
Break-Before-Make Time Delay, tD
150
190
95
120
100
125
50
Charge Injection
−0.4
ns typ
ns max
ns typ
ns max
ns typ
ns max
ns typ
ns min
pC typ
Off Isolation
85
dB typ
Channel-to-Channel Crosstalk
80
dB typ
Bandwidth −3 db
CS (OFF)
550
1.2
1.5
3.6
4.2
5.5
6.5
MHz typ
pF typ
pF max
pF typ
pF max
pF typ
pF max
tON (EN)
tOFF (EN)
240
265
150
170
155
170
10
CD (OFF)
CD, CS (ON)
Rev. B | Page 5 of 16
Test Conditions/Comments
VS = 0 V to 10 V, IS = −1 mA;
see Figure 21
VDD = 10.8 V, VSS = 0 V
VS = 0 V to 10 V, IS = −1 mA
VS = 3 V, 6 V, 9 V; IS = −1 mA
VDD = 13.2 V
VS = 1 V/10 V, VD = 10 V/1 V;
see Figure 22
VS = 1 V/10 V, VD = 10 V/1 V;
see Figure 22
VS = VD = 1 V or 10 V; see Figure 23
VIN = VINL or VINH
RL = 300 Ω, CL = 35 pF
VS = 8 V; see Figure 24
RL = 300 Ω, CL = 35 pF
VS = 8 V; see Figure 26
RL = 300 Ω, CL = 35 pF
VS = 8 V; see Figure 26
RL = 300 Ω, CL = 35 pF
VS1 = VS2 = 8 V; see Figure 25
VS = 6 V, RS = 0 Ω, CL = 1 nF;
see Figure 27
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
see Figure 28
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
see Figure 30
RL = 50 Ω, CL = 5 pF; see Figure 29
f = 1 MHz; VS = 6 V
f = 1 MHz; VS = 6 V
f = 1 MHz; VS = 6 V
f = 1 MHz; VS = 6 V
f = 1 MHz; VS = 6 V
f = 1 MHz; VS = 6 V
ADG1204
Parameter
POWER REQUIREMENTS
IDD
25°C
Y Version 1
−40°C to
−40°C to
+85°C
+125°C
0.001
1.0
IDD
170
285
1
2
Y version temperature range is −40°C to +125°C.
Guaranteed by design, not subject to production test.
Rev. B | Page 6 of 16
Unit
μA typ
μA max
μA typ
μA max
Test Conditions/Comments
VDD = 13.2 V
Digital inputs = 0 V or VDD
Digital inputs = 5 V
ADG1204
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameter
VDD to VSS
VDD to GND
VSS to GND
Analog Inputs 1
Digital Inputs1
Peak Current, S or D
Continuous Current
Operating Temperature Range
Automotive (Y Version)
Storage Temperature Range
Junction Temperature
14-Lead TSSOP, θJA Thermal
Impedance (4-Layer Board)
12-Lead LFCSP_VQ,
θJA Thermal Impedance
Reflow Soldering Peak
Temperature, Pb Free
1
Rating
35 V
−0.3 V to +25 V
+0.3 V to −25 V
VSS − 0.3 V to VDD + 0.3 V or
30 mA, whichever occurs first
GND − 0.3 V to VDD + 0.3 V or
30 mA, whichever occurs first
100 mA (pulsed at 1 ms,
10% duty cycle maximum)
45 mA
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating can be applied at any one time.
−40°C to +125°C
−65°C to +150°C
150°C
112°C/W
80°C/W
260°C
Overvoltages at IN, S, or D are clamped by internal diodes. Current should be
limited to the maximum ratings given.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. B | Page 7 of 16
ADG1204
VSS
3
12
VDD
S1
4
11
S3
ADG1204
TOP VIEW
(Not to Scale)
S2
5
10
S4
D
6
9
NC
NC
7
8
NC
NC = NO CONNECT
VSS 1
11 A0
PIN 1
INDICATOR
9 GND
S1 2
ADG1204
8 VDD
S2 3
TOP VIEW
(Not to Scale)
7 S3
NC = NO CONNECT
NOTES
1. EXPOSED PAD TIED TO SUBSTRATE, VSS.
Figure 2. TSSOP Pin Configuration
Figure 3. LFCSP_VQ Pin Configuration
Table 4. Pin Function Descriptions
Pin No.
TSSOP LFCSP_VQ
1
11
2
12
Mnemonic
A0
EN
3
4
5
6
7 to 9
10
11
12
13
14
VSS
S1
S2
D
NC
S4
S3
VDD
GND
A1
1
2
3
4
5
6
7
8
9
10
Description
Logic Control Input.
Active High Digital Input. When low, the device is disabled and all switches are off.
When high, Ax logic inputs determine on switches.
Most Negative Power Supply Potential.
Source Terminal. Can be an input or an output.
Source Terminal. Can be an input or an output.
Drain Terminal. Can be an input or an output.
No Connection.
Source Terminal. Can be an input or an output.
Source Terminal. Can be an input or an output.
Most Positive Power Supply Potential.
Ground (0 V) Reference.
Logic Control Input.
TRUTH TABLE
Table 5.
EN
0
1
1
1
1
A1
X
0
0
1
1
A0
X
0
1
0
1
S1
Off
On
Off
Off
Off
Rev. B | Page 8 of 16
S2
Off
Off
On
Off
Off
S3
Off
Off
Off
On
Off
S4
Off
Off
Off
Off
On
04779-003
GND
S4 6
A1
13
D 4
14
2
NC 5
1
04779-002
A0
EN
10 A1
12 EN
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
ADG1204
TYPICAL PERFORMANCE CHARACTERISTICS
200
250
180
VDD = +13.5V
VSS = –13.5V
160
200
140
ON RESISTANCE (Ω)
120
100
VDD = +15V
VSS = –15V
80
VDD = +16.5V
VSS = –16.5V
60
40
TA = +125°C
150
TA = +85°C
100
TA = –40°C
04779-010
20
0
–18 –15 –12
–9 –6
–3
0
3
6
9
SOURCE OR DRAIN VOLTAGE (V)
12
15
0
–15
18
–10
–5
0
5
SOURCE OR DRAIN VOLTAGE (V)
10
15
Figure 4. On Resistance as a Function of VD (VS), Dual Supply
Figure 7. On Resistance as a Function of VD (VS) for Different
Temperatures, Dual Supply
450
600
VDD = +12V
VSS = 0V
TA = +25°C
400
TA = +125°C
500
350
TA = +85°C
ON RESISTANCE (Ω)
ON RESISTANCE (Ω)
TA = +25°C
50
04779-006
ON RESISTANCE (Ω)
VDD = +15V
VSS = –15V
TA = +25°C
VDD = +5.5V
VSS = –5.5V
300
250
200
150
400
300
200
TA = –40°C
100
TA = +25°C
50
0
–5
–4
–3
–2
–1
0
1
2
3
SOURCE OR DRAIN VOLTAGE (V)
4
0
5
04779-007
04779-004
100
0
4
6
8
SOURCE OR DRAIN VOLTAGE (V)
12
10
Figure 5. On Resistance as a Function of VD (VS), Dual Supply
Figure 8. On Resistance as a Function of VD (VS) for Different
Temperatures, Single Supply
450
0.30
TA = 25°C
400
0.20
LEAKAGE (nA)
300
250
VDD = 13.2V
VSS = 0V
200
150
ID, IS (ON)
0.15
0.10
IS (OFF)
0.05
0
04779-005
50
0
2
4
6
8
10
SOURCE OR DRAIN VOLTAGE (V)
12
14
ID (OFF)
–0.05
–0.10
04779-008
100
0
VDD = +16.5V
VSS = –16.5V
VBIAS = +10V/–10V
0.25
VDD = 12V
VSS = 0V
VDD = 10.8V
VSS = 0V
350
ON RESISTANCE (Ω)
2
0
20
40
60
80
TEMPERATURE (°C)
100
120
Figure 9. Leakage Currents as a Function of Temperature, Dual Supply
Figure 6. On Resistance as a Function of VD (VS), Single Supply
Rev. B | Page 9 of 16
ADG1204
0.20
250
VDD = 13.2V
VSS = 0V
VBIAS = 10V/1V
0.15
200
VDD = +12V, VSS = 0V
ID, IS (ON)
0.05
TIME (ns)
LEAKAGE (nA)
0.10
ID (OFF)
0
–0.05
150
VDD = +15V, VSS = –15V
100
IS (OFF)
–0.10
04779-009
–0.20
0
20
40
60
80
TEMPERATURE (°C)
100
0
–40
120
Figure 10. Leakage Currents as a Function of Temperature,
Single Supply
–20
0
20
40
60
TEMPERATURE (°C)
80
100
120
Figure 13. Transition Times vs. Temperature
60
0
IDD PER CHANNEL
TA = +25°C
–10
50
–20
OFF ISOLATION (dB)
VDD = +15V, VSS = –15V
40
IDD (µA)
04779-015
50
–0.15
30
20
VDD = +15V
VSS = –15V
TA = +25°C
–30
–40
–50
–60
–70
–80
VDD = +12V, VSS = 0V
0
2
4
6
8
10
LOGIC, INX (V)
12
–100
–110
10k
14
Figure 11. IDD vs. Logic Level
1M
10M
FREQUENCY (Hz)
100M
1G
0
SOURCE TO DRAIN
DRAIN TO SOURCE
TA = +25°C
–10
–20
VDD = +15V
VSS = –15V
TA = +25°C
–30
0
CROSSTALK (dB)
2
VDD = +5V, VSS = –5V
VDD = +12V, VSS = 0V
–2
–40
S1 TO S2
–50
–60
–70
S2 TO S4
–80
–90
–6
–15
VDD = +15V, VSS = –15V
–10
–5
0
VS (V)
–100
5
10
15
Figure 12. Charge Injection vs. Source Voltage
04779-017
–4
04779-014
CHARGE INJECTION (pC)
100k
Figure 14. Off Isolation vs. Frequency
6
4
04779-016
0
–90
04779-011
10
–110
–120
10k
100k
1M
10M
FREQUENCY (Hz)
Figure 15. Crosstalk vs. Frequency
Rev. B | Page 10 of 16
100M
1G
ADG1204
6.5
0
VDD = +15V
VSS = –15V
TA = +25°C
6.3
6.1
CAPACITANCE (pF)
–10
–15
–20
5.9
S1
5.7
S3
5.5
S4
5.3
S2
5.1
4.9
04779-018
–25
–30
10k
100k
1M
10M
100M
FREQUENCY (Hz)
1G
04779-032
ON RESPONSE (dB)
–5
VDD = +15V
VSS = –15V
TA = +25°C
4.7
4.5
–10
10G
Figure 16. On Response vs. Frequency
–8
–6
–4
–2
0
2
VBIAS (V)
4
6
8
10
Figure 19. On Capacitance vs. Source Voltage
9
10.00
LOAD = +10kΩ
TA = +25°C
VDD = 12V
VSS = 0V
TA = 25°C
8
SOURCE/DRAIN ON
CAPACITANCE (pF)
7
THD + N (%)
1.00
VDD = +5V, VSS = –5V, VS = +3.5Vrms
VDD = +15V, VSS = –15V, VS = +5Vrms
0.10
6
5
4
DRAIN OFF
3
0.01
10
100
1k
FREQUENCY (Hz)
10k
100k
Figure 17. THD + N vs. Frequency
3.0
D
VDD = +15V
VSS = –15V
TA = +25°C
2.5
2.0
S1
1.5
S3
1.0
S2
0.5
0
–10
04779-031
CAPACITANCE (pF)
3.5
S4
–8
–6
–4
–2
0
2
4
0
SOURCE OFF
0
2
4
6
VBIAS (V)
8
10
Figure 20. Capacitance vs. Source Voltage, Single Supply
4.5
4.0
1
04779-033
04779-019
2
6
8
10
VBIAS (V)
Figure 18. Off Capacitance vs. Source Voltage
Rev. B | Page 11 of 16
12
ADG1204
TEST CIRCUITS
V
A
IDS
A
S
NC
VDD VSS
A0
EN
0.1µF
S1
S2
S3
S4
ADDRESS
DRIVE (VIN)
VS1
VS4
3V
50%
90%
90%
VOUT
RL
300Ω
50%
0V
VOUT
D
GND
tTRANSITION
CL
35pF
tTRANSITION
Figure 24. Address to Output Switching Times
VS
50Ω
2.4V
A1
A0
VDD VSS
VDD VSS
EN
0.1µF
S1
S2
S3
S4
VOUT
D
GND
ADDRESS
DRIVE (VIN)
VS1
0V
VOUT
CL
35pF
RL
300Ω
3V
80%
80%
04779-024
0.1µF
tBBM
Figure 25. Break-Before-Make Time Delay
A1
VDD VSS
VDD VSS
A0
EN
VS
50Ω
0.1µF
S1
S2
S3
S4
ENABLE
DRIVE (VIN)
VS
50%
VO
RL
300Ω
CL
35pF
VOUT
0.9VO
0.9VO
0V
Figure 26. Enable-to-Output Switching Delay
Rev. B | Page 12 of 16
50%
0V
OUTPUT
D
GND
3V
tON (EN)
tOFF (EN)
04779-025
0.1µF
A
VD
Figure 23. On Leakage
04779-023
A1
VDD VSS
D
NC = NO CONNECT
Figure 22. Off Leakage
0.1µF
2.4V
ID (ON)
ID (OFF)
VD
Figure 21. On Resistance
VS
D
VS
04779-020
VS
S
04779-022
IS (OFF)
D
04779-021
S
ADG1204
VDD
VSS
VDD
VSS
S
D
VOUT
RS
ΔVOUT
QINJ = CL × ΔVOUT
VOUT
VIN
CL
1nF
VS
DECODER
SW OFF
SW OFF
SW ON
GND
SW ON
VIN
SW OFF
SW OFF
04779-026
A1 A2
EN
Figure 27. Charge Injection
VDD
VSS
VDD
NETWORK
ANALYZER
NETWORK
ANALYZER
VSS
S
VOUT
0.1µF
VDD
D
VS
S2
D
GND
VOUT
R
50Ω
VS
GND
OFF ISOLATION = 20 log
VOUT
VS
04779-027
RL
50Ω
VSS
S1
RL
50Ω
50Ω
50Ω
CHANNEL-TO-CHANNEL CROSSTALK = 20 log
Figure 28. Off Isolation
VDD
VSS
0.1µF
0.1µF
04779-029
VDD
0.1µF
VOUT
VS
Figure 30. Channel-to-Channel Crosstalk
VSS
0.1µF
VDD
VDD
VSS
S
S
D
IN
VOUT
VOUT WITHOUT SWITCH
04779-028
VOUT WITH SWITCH
VS
V p-p
D
VIN
INSERTION LOSS = 20 log
AUDIO PRECISION
VSS
RS
VS
GND
0.1µF
VDD
50Ω
RL
50Ω
VSS
0.1µF
NETWORK
ANALYZER
Figure 29. Bandwidth
GND
RL
10kΩ
Figure 31. THD + Noise
Rev. B | Page 13 of 16
VOUT
04779-030
0.1µF
ADG1204
TERMINOLOGY
IDD
The positive supply current.
CD, CS (On)
The on switch capacitance, measured with reference to ground.
ISS
The negative supply current.
CIN
The digital input capacitance.
VD (VS)
The analog voltage on Terminal D and Terminal S.
tON (EN)
The delay between applying the digital control input and the
output switching on.
RON
The ohmic resistance between D and S.
RFLAT(ON)
Flatness is defined as the difference between the maximum and
minimum value of on resistance, as measured over the specified
analog signal range.
IS (OFF)
The source leakage current with the switch off.
tOFF (EN)
The delay between applying the digital control input and the
output switching off.
tTRANS
The delay time between the 50% and 90% points of the digital
input and switch on condition when switching from one
address state to another.
ID (OFF)
The drain leakage current with the switch off.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
ID, IS (ON)
The channel leakage current with the switch on.
Off Isolation
A measure of unwanted signal coupling through an off switch.
VINL
The maximum input voltage for Logic 0.
Crosstalk
A measure of unwanted signal that is coupled through from one
channel to another as a result of parasitic capacitance.
VINH
The minimum input voltage for Logic 1.
IINL (IINH)
The input current of the digital input.
CS (OFF)
The off switch source capacitance, which is measured with
reference to ground.
CD (OFF)
The off switch drain capacitance, which is measured with
reference to ground.
Bandwidth
The frequency at which the output is attenuated by −3 dB.
On Response
The frequency response of the on switch.
Insertion Loss
The loss due to the on resistance of the switch.
Total Harmonic Distortion + Noise (THD + N)
The ratio of the harmonic amplitude plus noise of the signal to
the fundamental.
Rev. B | Page 14 of 16
ADG1204
OUTLINE DIMENSIONS
5.10
5.00
4.90
14
8
4.50
4.40
4.30
6.40
BSC
1
7
PIN 1
0.65 BSC
1.20
MAX
0.15
0.05
COPLANARITY
0.10
0.30
0.19
0.20
0.09
0.75
0.60
0.45
8°
0°
SEATING
PLANE
061908-A
1.05
1.00
0.80
COMPLIANT TO JEDEC STANDARDS MO-153-AB-1
Figure 32. 14-Lead Thin Shrink Small Outline Package [TSSOP]
(RU-14)
Dimensions shown in millimeters
3.15
3.00 SQ
2.85
SEATING
PLANE
12° MAX
10
9
0.75
0.60
0.50
7
EXPOSED
PAD
(BOTTOM
VIEW)
6
PIN 1
INDICATOR
12
1
*1.45
1.30 SQ
1.15
3
4
0.25 MIN
0.80 MAX
0.65 TYP
0.05 MAX
0.02 NOM
0.30
0.23
0.18
0.20 REF
COPLANARITY
0.08
*COMPLIANT TO JEDEC STANDARDS MO-220-VEED-1
EXCEPT FOR EXPOSED PAD DIMENSION.
050808-B
1.00
0.85
0.80
0.50
BSC
0.60 MAX
2.95
2.75 SQ
2.55
TOP
VIEW
PIN 1
INDICATOR
0.60 MAX
Figure 33. 12-Lead Lead Frame Chip Scale Package [LFCSP_VQ]
3 mm × 3 mm Body, Very Thin Quad
(CP-12-1)
Dimensions shown in millimeters
ORDERING GUIDE
Model
ADG1204YRUZ 1
ADG1204YRUZ-REEL1
ADG1204YRUZ-REEL71
ADG1204YCPZ-500RL71
ADG1204YCPZ-REEL71
1
Temperature Range
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
Package Description
14-Lead Thin Shrink Small Outline Package (TSSOP)
14-Lead Thin Shrink Small Outline Package (TSSOP)
14-Lead Thin Shrink Small Outline Package (TSSOP)
12-Lead Lead Frame Chip Scale Package (LFCSP_VQ)
12-Lead Lead Frame Chip Scale Package (LFCSP_VQ)
Z = RoHS Compliant Part..
Rev. B | Page 15 of 16
Package Option
RU-14
RU-14
RU-14
CP-12-1
CP-12-1
ADG1204
NOTES
©2005–2009 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D04779-0-2/09(B)
Rev. B | Page 16 of 16