AD ADL5611ARKZ-R7

30 MHz to 6 GHz
RF/IF Gain Block
ADL5611
Preliminary Technical Data
FEATURES
Fixed gain of 22.1 dB
Broad operation from 30 MHz to 6 GHz
High dynamic range gain block
Input/output internally matched to 50 Ω
Integrated bias control circuit
OIP3 of 38.5 dBm at 900 MHz
P1dB of 21.0 dBm at 900 MHz
Noise figure of 2.1 dB at 900 MHz
Single 5V power supply
Low quiescent current of 90 mA
Wide operating temperature range of -40°C to 105°C
Thermally efficient SOT-89 package
ESD rating of ±1.5 kV (Class 1C)
FUNCTIONAL BLOCK DIAGRAM
GND
(2)
ADL5611
BIAS
1
2
3
RFIN
GND
RFOUT
Figure 1. Functional Block Diagram
GENERAL DESCRIPTION
The ADL5611 is a single ended RF/IF gain block amplifier that
provides broadband operation from 30 MHz to 6 GHz. The
ADL5611 provides a low noise figure of 2 dB with a very high
OIP3 of over 38 dBm simultaneously, which delivers a high
dynamic range.
The ADL5611 provides a gain of 22 dB, which is stable over
frequency, temperature, power supply, and from device to
device. The amplifier is offered in the industry standard SOT89 package, and internally matched to 50 Ω at the input and
output, making the ADL5611 very easy to implement in a wide
variety of applications. The only external parts required are the
input/output ac coupling capacitors, power supply decoupling
capacitors, and bias inductor.
The ADL5611 has a high ESD rating of ±1.5 kV (Class 1C), and
is also fully specified for operation across the wide temperature
range of −40°C to +105°C.
A fully populated RoHS-compliant evaluation board is
available.
Rev. PrA
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2013 Analog Devices, Inc. All rights reserved.
ADL5611
Preliminary Technical Data
TABLE OF CONTENTS
Features .............................................................................................. 1
ESD Caution...................................................................................4
Functional Block Diagram .............................................................. 1
Pin Configuration and Function Descriptions..............................5
General Description ......................................................................... 1
Typical Performance Characteristics ..............................................6
Specifications..................................................................................... 3
Evaluation Board ...............................................................................7
Absolute Maximum Ratings............................................................ 4
Outline Dimensions ..........................................................................8
Thermal Resistance ...................................................................... 4
Ordering Guide .............................................................................8
Rev. PrA | Page 2 of 8
Preliminary Technical Data
ADL5611
SPECIFICATIONS
VPOS = 5 V and TA = 25°C, unless otherwise noted.
Table 1.
Parameter
OVERALL FUNCTION
Frequency Range
FREQUENCY = 900 MHz
Gain
Output 1 dB Compression Point
Output Third-Order Intercept
Noise Figure
FREQUENCY = 1900 MHz
Gain
Output 1 dB Compression Point
Output Third-Order Intercept
Noise Figure
POWER INTERFACE
Supply Voltage
Supply Current
vs. Temperature
Power Dissipation
Conditions
Min
Typ
30
Δf = 1 MHz, output power (POUT) = 3 dBm per
tone
Δf = 1 MHz, output power (POUT) = 3 dBm per
tone
Max
Unit
6000
MHz
22.1
21.0
38.5
dB
dBm
dBm
2.1
dB
21.2
20.5
35.8
dB
dBm
dBm
2.5
dB
VPOS
4.75
-40˚C≤TA≤+85˚C
VPOS = 5V
Rev. PrA | Page 3 of 8
5
90.7
-7/+5
0.45
5.25
V
mA
mA
W
ADL5611
Preliminary Technical Data
ABSOLUTE MAXIMUM RATINGS
THERMAL RESISTANCE
Table 2.
Parameter
Supply Voltage, VPOS
Input Power (50 Ω Impedance)
Internal Power Dissipation (Paddle Soldered)
Maximum Junction Temperature
Operating Temperature Range
Storage Temperature Range
Rating
TBD V
TBD dBm
TBD W
150°C
−40°C to +105°C
−65°C to +150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Table 3 lists the junction-to-air thermal resistance (θJA) and the
junction-to-paddle thermal resistance (θJC) for the ADL5611.
Table 3. Thermal Resistance
Package Type
3-Lead SOT-89
θJA1
TBD
θJC2
TBD
Unit
°C/W
Measured on Analog Devices evaluation board. For more information about
board layout, see the Soldering Information and Recommended PCB Land
Pattern section.
2
Based on simulation with JEDEC standard JESD51.
1
ESD CAUTION
Rev. PrA | Page 4 of 8
Preliminary Technical Data
ADL5611
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
RFIN
1
GND
2
RFOUT
3
ADL5611
TOP VIEW
(Not to Scale)
(2) GND
Figure 2.Pin Configuration
Table 4. Pin Function Descriptions
Pin No.
1
2
3
Exposed
Paddle
Mnemonic
RFIN
GND
RFOUT
Description
RF Input. This pin requires a dc blocking capacitor.
Ground. Connect this pin to a low impedance ground plane.
RF Output and Supply Voltage. DC bias is provided to this pin through an inductor that is connected to the
external power supply. RF path requires a dc blocking capacitor.
Exposed Paddle. Internally connected to GND. Solder to a low impedance ground plane.
Rev. PrA | Page 5 of 8
ADL5611
Preliminary Technical Data
TYPICAL PERFORMANCE CHARACTERISTICS
Figure 3. Gain vs. Frequency, 0.5-4.0GHz
Figure 6. Input Return Loss (S11), Output Return Loss (S22), and
Reverse Isolation (S12) vs. Frequency, 0.5-4.0GHz
Figure 4. OIP3 vs. POUT, 900MHz
Figure 7. OIP3 vs. POUT, 1900MHz
Figure 5. P1dB vs. Frequency, 0.9-1.9GHz
Figure 8. Noise Figure vs. Frequency, 0.5-4.0GHz
Rev. PrA | Page 6 of 8
Preliminary Technical Data
ADL5611
EVALUATION BOARD
Figure 9 shows the schematic for the ADL5611 evaluation board.
The board is powered by a single 5 V supply. The components
used on the board are listed in Table 5. Power can be applied to
the board through clip-on leads (VPOS, GND).
GND VPOS
(2)
GND
C6
ADL5611
1µF
C5
1.2nF
C4
68pF
1
2
RFOUT
C1
GND
RFIN
RFIN
L1
43nH
Figure 10. Evaluation Board Layout (Top)
3
0.1µF
C2 RFOUT
0.1µF
Figure 9. Evaluation Board Schematic
Table 5. Evaluation Board Configuration Options
Component
C1, C2
L1
VPOS , GND
C4, C5, C6
Function
AC-coupling capacitors.
DC bias inductor.
Clip-on terminals for power supply.
Power supply decoupling capacitors
Default Value
0.1 μF 0402
43 nH 0603 (Coilcraft 0603HP or equivalent)
C4 = 68 pF, 0603; C5 = 1.2 nF, 0603; C6 = 1 μF, 1206
Rev. PrA | Page 7 of 8
ADL5611
Preliminary Technical Data
OUTLINE DIMENSIONS
*1.55 REF
(2)
4.25
3.94
1
2
2.60
2.30
3
1.20
0.90
1.50 TYP
3.00 TYP
4.60
4.40
1.60
1.40
0.44
0.35
END VIEW
*0.58
0.40
*COMPLIANT TO JEDEC STANDARDS TO-243 WITH
EXCEPTION TO DIMENSIONS INDICATED BY AN ASTERISK.
040407-A
*0.52
0.32
Figure 11. 3 Lead Small Outline Transistor Package {SOT-89}
(RK-3)
Dimensions shown in Millimeters
ORDERING GUIDE
Model 1
ADL5611ARKZ-R7
ADL5611-EVALZ
1
Temperature Range
−40°C to +105°C
−40°C to +105°C
Package Description
3-Lead SOT-89, 7“ Tape and Reel
Evaluation Board
Z = RoHS Compliant Part.
©2012 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
PR11508-0-5/13(PrA)
Rev. PrA | Page 8 of 8
Package Option
RK-3