VISHAY SBL1030CT

SBL1030CT AND SBL1040CT
SCHOTTKY RECTIFIER
Reverse Voltage - 30 and 40 Volts
Forward Current - 10.0 Amperes
FEATURES
TO-220AB
0.185 (4.70)
0.415 (10.54) MAX.
0.175 (4.44)
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
0.055 (1.39)
DIA.
0.148 (3.74)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.560 (14.22)
0.530 (13.46)
0.410 (10.41)
0.390 (9.91)
0.350 (8.89)
0.635 (16.13)
0.330 (8.38)
0.625 (15.87)
1
PIN
2
1.148 (29.16)
3
1.118 (28.40)
0.110 (2.79)
0.100 (2.54)
0.160 (4.06)
0.140 (3.56)
0.560 (14.22)
0.530 (13.46)
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.105 (2.67)
0.095 (2.41)
MECHANICAL DATA
0.022 (0.56)
0.014 (0.35)
0.205 (5.20)
0.195 (4.95)
♦ Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
♦ Metal silicon junction, majority carrier conduction
♦ Low power loss, high efficiency
♦ High current capability,
low forward voltage drop
♦ High surge capacity
♦ For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
♦ Guardring for overvoltage protection
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
PIN 1
PIN 2
PIN 3
CASE
Dimensions in inches and (millimeters)
Case: JEDEC TO-220AB molded plastic body
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs max.
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
SBL1030CT
SBL1040CT
UNITS
Maximum repetitive peak reverse voltage
VRRM
30
40
Volts
Maximum RMS voltage
VRMS
21
28
Volts
Maximum DC blocking voltage
VDC
30
40
Volts
Maximum average forward rectified current
at TC=95°C
I(AV)
10.0
Amps
IFSM
175.0
Amps
VF
0.55
Volts
IR
0.5
50.0
mA
RΘJC
3.0
°C/W
TJ, TSTG
-40 to +125
°C
Peak forward surge current, 8.3ms single
half sine-wave superimposed on rated load
(JEDEC Method)
Maximum instantaneous forward voltage
per leg at 5.0A (NOTE 1)
Maximum instantaneous reverse current at
rated DC blocking voltage (NOTE 1)
Typical thermal resistance (NOTE 2)
Operating and storage temperature range
NOTES:
(1) Pulse test: 300µs pulse width, 1% duty cycle
(2) Thermal resistance from junction to case per leg
4/98
TC=25°C
TC=100°C
RATINGS AND CHARACTERISTIC CURVES SBL1030CT AND SBL1040CT
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE
CURRENT
300
RESISTIVE OR INDUCTIVE LOAD
10
7.5
5
2.5
0
0
50
100
150
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD CURRENT,
AMPERES
FIG. 1 - FORWARD CURRENT DERATING CURVE
12.5
250
200
150
100
50
0
CASE TEMPERATURE, °C
TJ=TJ max.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
1
10
100
NUMBER OF CYCLES AT 60 HZ
FIG. 4 - TYPICAL REVERSE
CHARACTERISTICS PER LEG
50
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER LEG
10
PULSE WIDTH = 300µs
1% DUTY CYCLE
TJ=125°C
10
INSTANTANEOUS REVERSE CURRENT,
MILLIAMPERES
INSTANTANEOUS FORWARD CURRENT,
AMPERES
50
TJ=125°C
TJ=25°C
1
0.1
0.01
0
1
TJ=75°C
0.1
0.01
TJ=25°C
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
0.001
0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
JUNCTION CAPACITANCE, pF
4,000
TJ = 25°C
f=1.0 MHz
Vsig=50mVp-p
1,000
100
0.1
1.0
1
10
REVERSE VOLTAGE, VOLTS
100
TRANSICENTTHERMAL IMPEDANCE, °C/W
FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG
FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG
100
10.0
1.0
1.0
0.1
0.01
0.1
1
10.0
t, PULSE DURATION, sec.
100