KERSEMI MBR1560CT

MBR1535CT THRU MBR1560CT
FEATURES
TO-220AB
0.185 (4.70)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.175 (4.44)
0.154 (3.91)
0.055 (1.39)
DIA.
0.148 (3.74)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.560 (14.22)
0.530 (13.46)
0.410 (10.41)
0.390 (9.91)
0.350 (8.89)
0.635 (16.13)
0.330 (8.38)
0.625 (15.87)
1
PIN
2
1.148 (29.16)
3
1.118 (28.40)
0.110 (2.79)
0.100 (2.54)
0.160 (4.06)
0.140 (3.56)
0.560 (14.22)
0.530 (13.46)
♦ Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
♦ Metal silicon junction, majority carrier conduction
♦ Low power loss, high efficiency
♦ High current capability,
low forward voltage drop
♦ High surge capability
♦ For use in low voltage, high frequency inverters,
free wheeling, and polarity protection applications
♦ Dual rectifier construction, positive center tap
♦ Guardring for transient protection
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
MECHANICAL DATA
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.105 (2.67)
0.095 (2.41)
0.022 (0.56)
0.014 (0.35)
0.205 (5.20)
0.195 (4.95)
PIN 1
PIN 2
PIN 3
CASE
Dimensions in inches and (millimeters)
Case: JEDEC TO-220AB molded plastic body
Terminals: Leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounces, 2.24 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
MBR1535CT
MBR1545CT
MBR1550CT
MBR1560CT
UNITS
Maximum repetitive peak reverse voltage
VRRM
35
45
50
60
Volts
Maximum working peak reverse voltage
VRWM
35
45
50
60
Volts
Maximum DC blocking voltage
VDC
35
45
50
60
Volts
Maximum average forward rectified current
at TC=105°C
I(AV)
15.0
Amps
Peak repetitive forward current at TC=105°C per leg
(rated VR, 20KHZ sq.wave)
IFRM
15.0
Amps
Peak forward surge current 8.3ms single half sinewave superimposed on rated load per leg (JEDEC method)
IFSM
150.0
Amps
Peak repetitive reverse surge current per leg (NOTE 1)
IRRM
Maximum instantaneous forward voltage
per leg at
(NOTE 2)
IF=7.5A,TC=25°C
IF=7.5A,TC=125°C
IF=15A,TC=25°C
IF=15A,TC=125°C
Maximum instantaneous reverse current at rated
DC blocking voltage per leg
TC=25°C
(NOTE 2) TC=125°C
VF
IR
1.0
_
0.57
0.84
0.72
0.1
15.0
0.5
Amps
0.75
0.65
_
_
Volts
1.0
50.0
mA
Voltage rate of change, (rated VR)
dv/dt
10,000
V/µs
Maximum thermal resistance per leg (NOTE 3)
RΘJA
RΘJC
60.0
3.0
°C/W
TJ
-65 to +150
°C
TSTG
-65 to +175
°C
Operating junction temperature range
Storage temperature range
NOTES:
(1) 2.0µs pulse width, f=1.0 KHZ
(2) 300µs, pulse width, 1% duty cycle
(3) Thermal resistance from junction to case and thermal resistance from junction to ambient
www.kersemi.com
4/98
PEAK FORWARD SURGE CURRENT,
AMPERES
RATINGS AND CHARACTERISTIC CURVES MBR1535CT THRU MBR1560CT
FIG. 1 - FORWARD CURRENT DERATING CURVE
AVERAGE FORWARD CURRENT,
AMPERES
25
RESISTIVE OR INDUCTIVE LOAD
20
15
10
5
0
0
50
100
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
175
300
TJ=TJ max.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
150
250
125
200
100
150
75
100
50
25
0
1
10
10
NUMBER OF CYCLES AT 60 HZ
150
100
100
CASE TEMPERATURE, °C
FIG. 4 - TYPICAL REVERSE
CHARACTERISTICS
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
50
50
50
10
10
INSTANTANEOUS REVERSE CURRENT,
MILLIAMPERES
INSTANTANEOUS FORWARD CURRENT,
AMPERES
10
PULSE WIDTH=300µs
1% DUTY CYCLE
TJ=125°C
1
1
TJ=25°C
0.1
0.1
MBR 1535 - MBR 1545
MBR 1550 & MBR 1560
TJ=125°C
1
0.1
TJ=75°C
MBR1535 - MBR1545
MBR1550 & MBR1560
0.01
0.01
0.010 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
TJ=25°C
0.001
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG
FIG.6- TYPICAL TRANSIENT THERMAL
IMPEDANCE PER LEG
4,000
TRANSIENT THERMAL IMPEDANCE, °C/W
JUNCTION CAPACITANCE, pF
TJ=25°C
f=1.0 MHz
Vsig=50mVp-p
1,000
100
MBR1535 - MBR1545
MBR1550 & MBR1560
10
0.1
100
10
1
0.1
0.01
0.1
1
10
t, PULSE DURATION, sec.
1
10
100
REVERSE VOLTAGE, VOLTS
www.kersemi.com
100