SBL1030 AND SBL1040 SCHOTTKY RECTIFIER Reverse Voltage - 30 and 40 Volts FEATURES TO-220AC 0.185 (4.70) 0.415 (10.54) MAX. 0.175 (4.44) 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) 0.055 (1.39) DIA. 0.148 (3.74) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.560 (14.22) 0.530 (13.46) 0.410 (10.41) 0.390 (9.91) 0.350 (8.89) 0.635 (16.13) 0.330 (8.38) 0.625 (15.87) 1.148 (29.16) PIN 1 2 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.160 (4.06) 0.140 (3.56) 0.560 (14.22) 0.530 (13.46) 0.105 (2.67) 0.095 (2.41) Forward Current - 10.0 Amperes 0.037 (0.94) 0.027 (0.68) ♦ Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 ♦ Metal silicon junction, majority carrier conduction ♦ Low power loss, high efficiency ♦ High current capability, low forward voltage drop ♦ High surge capability ♦ For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ♦ Guardring for overvoltage protection ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.25" (6.35mm) from case MECHANICAL DATA 0.022 (0.56) 0.014 (0.36) PIN 1 0.205 (5.20) 0.195 (4.95) PIN 2 CASE Dimensions in inches and (millimeters) Case: JEDEC TO-220AC molded plastic body Terminals: Leads solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 5 in. - lbs. max. Weight: 0.08 ounces, 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS SBL1030 SBL1040 UNITS Maximum repetitive peak reverse voltage VRRM 30 40 Volts Maximum RMS voltage VRMS 21 28 Volts Maximum DC blocking voltage VDC 30 40 Volts Maximum average forward rectified current at TC=110°C I(AV) 10.0 Amps Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 250.0 Amps VF 0.55 Volts IR 1.0 50.0 mA RΘJC 2.0 °C/W TJ,TSTG -40 to +125 °C Maximum instantaneous forward voltage at 10A (NOTE 1) Maximum instantaneous reverse current at rated DC blocking voltage (NOTE 1) Typical thermal resistance (NOTE 2) Operating and storage temperature range NOTES: (1) Pulse test: 300µs pulse width, 1% duty cycle (2) Thermal resistance from junction to case per leg 4/98 TC=25°C TC=100°C RATINGS AND CHARACTERISTIC CURVES SBL1030 AND SBL1040 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE 12.5 RESISTIVE OR INDUCTIVE LOAD 10 7.5 5 2.5 0 0 50 100 150 300 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 250 200 150 100 50 0 1 10 100 NUMBER OF CYCLES AT 60 HZ CASE TEMPERATURE, °C FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 50 10 INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 50 PULSE WIDTH = 300µs 1% DUTY CYCLE 10 TJ=125°C 1 TJ=25°C 0.1 0.01 0 TJ=125°C 1 TJ=75°C 0.1 0.01 TJ=25°C 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.001 0 20 40 60 80 100 FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 4,000 TJ=25°C f=1.0 MHz Vsig=50mVp-p 1,000 100 0.1 1 10 REVERSE VOLTAGE, VOLTS 100 TRANSIENT THERMAL IMPEDANCE, °C/W PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 100 10.0 1 0.1 0.01 0.1 1 10.0 t, PULSE DURATION, sec. 100