MD-/MDS-149 Double-Balanced Mixer, 10 - 1500 MHz Features V 3.00 FP-2 (MD-149) n Over Two-Decade Frequency Range n Conversion Loss: 6 dB Typical Midband n LO-RF Isolation: 40 dB Typical Midband n Fully Hermetic Package n Impedance: 50 Ohms Nominal n Maximum Input Power: 300 mW Max, Derated to 85°C n n @ 3.2 mW/°C IF Port Current: 50 mA Max. MIL-STD-883 Screening Available Description Transformers convert the LO and RF paths to balanced lines connecting to a low barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. SF-1 (MDS-149) Pin Configuration (MD-149) Pin No. Function Pin No. Function 1 GND 5 LO 2 GND 6 GND 3 GND 7 GND 4 IF 8 RF Pin Configuration (MDS-149) Pin No. Function Pin No. Function 1 GND 3 LO 2 IF 4 RF Double Balanced Mixer, 10 - 1500 MHz MD-/MDS-149 V 3.00 Electrical Specifications1: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Frequency Range RF, LO Ports IF Port 10 - 1500 DC - 1500 MHz MHz — — — 10 - 1000 MHz 1000 - 1500 MHz dB dB — — — — 7.5 10 LO to RF 10 - 100 MHz 100 - 1000 MHz 1000 - 1500 MHz dB dB dB 35 30 20 — — — — — — LO to IF 10 - 100 MHz 100 - 1000 MHz 1000 - 1500 MHz dB dB dB 35 20 12 — — — — — — RF to IF 10 - 100 MHz 100 - 1000 MHz 1000 - 1500 MHz dB dB dB 30 18 8 — — — — — — DC Polarity Negative — — — — — DC Offset — — mV — <4 — RF Input 1 dB Compression 1 dB Desensitization — — dBm dBm — — 0 -2.0 — — SSB Noise Figure Within 1 dB of Conversion Loss Max — — — — — Typical Two-Tone IM Ratio with a –10 dBm input, each input, 25 MHz and 35 MHz IF 100 - 500 MHz 500 - 1000 MHz 1000 - 1500 MHz dB dB dB — — — 48 43 35 — — — Conversion Loss Isolation 1. All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance. Typical Performance Curves .506 11 .385 Ref .220 .381 .165 Conversion Loss (dB) 4X .016 ± .002 Conversion Loss (IF = 5 MHz, RF = -5 dBm, LO = +7 dBm) 4X .099 ± .010 6X .050 (+.020/-.000) Bottom View of SF-1 10 9 8 7 6 5 .002 .000 10 20 50 100 200 500 1000 1400 1800 .510 Ref .430 .367 .305 .143 .205 .080 .000 .002 Frequency (MHz) Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. 2 Double Balanced Mixer, 10 - 1500 MHz MD-/MDS-149 V 3.00 Typical Performance Curves Conversion Loss vs. LO Power (RF = 1450 MHz, -10 dBm, LO = 1500 MHz) Isolation RF-IF LO-IF LO-RF 60 Conversion Loss (dB) 10 Isolation (dB) 50 40 30 20 10 9 8 7 0 10 20 50 100 200 500 1000 1400 1800 Frequency (MHz) 0 2 4 6 8 10 12 LO Power (dBm) Ordering Information Part Number Package MD-149 PIN FP-2 MDS-149 PIN SF-1 Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. 3