Lighting | Imaging | Telecom p Pyroelectric Infrared Detectors Single Element Detector LHi 907 Single FET output Designed for ceiling mount applications The LHi 907 pyroelectric infrared-detector is a special design for motion control in ceiling mount applications. It includes a pyroelectric ceramic with a round sensitive element connected to one FET in source follower connection, and a compensational second element. This detector is available in TO-5 housing with a standard infrared filter. It offers low noise, and special field of view and capture for ceiling mount applications. Parameters min typical Element size R esponsivity 3300 Noise Right for modification reserved / WS /, 29.6.2001 6x10 Output Impedance 7 4000 V /W 100°C, 1 Hz 50 µV pp 25°C , 0,3...10Hz 1,5 V RS =47kW , 25°C W Ö Hz 1Hz Bw, 100°C, 1 Hz 19x10 2 Field of View, horizontal vertical 1 R [kV/W] RS =47kW , 25°C 15 V RS =47kW , 25°C 145° unobstructed Operating Temp. -40 85 °C non permanent S torage Temperature -40 85 °C non permanent 10 f [Hz] all Dimensions in mm Dimensions in mmm Frequency Response Europe: PerkinElmer Optoelectronics GmbH Wenzel Jaksch Str 31 Wiesbaden / Germany Phone +49(0)611 492 0 Fax +49(0)611 492 170 kW unobstructed 1 0,1 10 150° 10 0,1 0,01 cm Ö Hz/W 1Hz Bw, 100°C, 1 Hz 7 5 Operating Voltage condition (1 element) 7,5x10-10 23x10-10 D* units mm2 0,2 NEP ma x 1,77 20 Offset Voltage Field of View 907 LHi USA: PerkinElmer Optoelectronics 2175 Mission Colledge Blvd Santa Clara, CA 95054 Phone +408 565 0830 Fax +408 565 0703 Asia: PerkinElmer Optoelectronics 47, Ayer Rajah Crescent #06-12 Singapore 139947 Phone +65 775 2022 Fax +65 775 1008 www.perkinelmer.com/opto D A T A S H E E T Round element design with compensation