Lighting | Imaging | Telecom p Pyroelectric Infrared Detectors Dual Element Detector LHi 906 Single FET output Designed for ceiling mount applications The LHi 906 pyroelectric infrared-detector is a special design for motion control in ceiling mount applications. It includes a pyroelectric ceramic with 2 sensitive elements in round shape connected to one FET in source follower connection. This detector is available in TO-5 housing with a standard infrared filter. It offers low noise, special field of view and capture for ceiling mount applications. Parameters min typical Element size R s esponsivity 2500 Right for modification reserved / WS /, 29.6.2001 (2 round elemts.) 3000 V /W 100°C, 1 Hz 20 50 µV pp 25°C , 0,3...10Hz 1,5 V RS =47kW , 25°C W Ö Hz 1Hz Bw, 100°C, 1 Hz 0,2 7,5x10-10 23x10-10 6x10 7 19x10 5 2 Field of View, horizontal vertical cm Ö Hz/W 1Hz Bw, 100°C, 1 Hz 7 10 kW RS =47kW , 25°C 15 V RS =47kW , 25°C 150° unobstructed 150° unobstructed Operating Temp. -40 85 °C non permanent S torage Temperature -40 85 °C non permanent 10 R [kV/W] mm2 Noise Operating Voltage 1 10 f [Hz] Dimensions in mm Frequency Response Europe: PerkinElmer Optoelectronics GmbH Wenzel Jaksch Str 31 Wiesbaden / Germany Phone +49(0)611 492 0 Fax +49(0)611 492 170 2,66 % Output Impedance 1 condition 10 D* 0,1 units 1 NEP 0,1 0,01 ma x Match Offset Voltage Field of View 906 LHi USA: PerkinElmer Optoelectronics 2175 Mission Colledge Blvd Santa Clara, CA 95054 Phone +408 565 0830 Fax +408 565 0703 Asia: PerkinElmer Optoelectronics 47, Ayer Rajah Crescent #06-12 Singapore 139947 Phone +65 775 2022 Fax +65 775 1008 www.perkinelmer.com/opto D A T A S H E E T Banana ( Yin Yang) element design