SLUS581 − FEBRUARY 2004
FEATURES
D Power Monitoring and Switching for
D
D
D
D
D
D
D
DESCRIPTION
The CMOS bq2205 SRAM non-volatile controller
with reset provides all the necessary functions for
converting one or two banks of standard CMOS
SRAM into non-volatile read/write memory.
Non-Volatile Control of SRAMs
Input Decoder Allows Control of 1 or 2 Banks
of SRAM
Write-Protect Control
3-V Primary Cell Input
3.3-V Operation
Reset Output for System Power-On Reset
Less than 20-ns Chip Enable Propagation
Delay
Small 16-Lead TSSOP Package
A precision comparator monitors the 3.3-V VCC
input for an out-of-tolerance condition. When
out-of-tolerance is detected, the two conditioned
chip-enable outputs are forced inactive to
write-protect both banks of SRAM.
Power for the external SRAMs, VOUT, is switched
from the VCC supply to the battery-backup supply
as VCC decays. On a subsequent power-up, the
VOUT supply is automatically switched from the
backup supply to the VCC supply. The external
SRAMs are write-protected until a power-valid
condition exists. The reset output provides
power-fail and power-on resets for the system.
During power-valid operation, the input decoder, A,
selects one of two banks of SRAM.
APPLICATIONS
D NVSRAM Modules
D Point-of-Sale Systems
D Facsimile, Printers and Photocopiers
D Internet Appliances
D Servers
D Medical Instrumentation and Industrial
Products
Main Supply
From Address
Selector
VCC
bq2205LYPW
VCC
VDC
12 VCC
BW
GND
1
RST 16
Backup Supply
A
11 CE
VDC
9 BCP
GND
4
VSS
5
VSS
8
VSS
15
To Microprocessor
VCC
VOUT 13
CECON1 10
VCC
VCC
CE
CE
SRAM Bank 1
Pushbutton
Reset
(Optional)
SRAM Bank 2
CECON2 14
UDG−03129
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
!"#$%! & '("")% $& ! *(+'$%! ,$%)
"!,('%& '!!"# %! &*)''$%!& *)" %-) %)"#& ! ).$& &%"(#)%&
&%$,$", /$""$%0 "!,('%! *"!')&&1 ,!)& !% )')&&$"+0 '+(,)
%)&%1 ! $++ *$"$#)%)"&
Copyright 2004, Texas Instruments Incorporated
www.ti.com
1
SLUS581 − FEBRUARY 2004
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION
TA
−20°C to 70°C
OPERATION
PART NUMBER(1)
SYMBOL
3.3 V
bq2205LYPW
bq2205LY
(1) The PW package is available taped and reeled. Add an R suffix to the device type (i.e. bq2205LYPWR) to order quantities of 2,000 devices
per reel.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted(2)
bq2205LY
Input voltage range
VCC, (wrt VSS)
BCP, (wrt VSS)
all other pins, (wrt VSS)
UNIT
−0.3 to 6.0
−0.3 to 4.5
V
−0.3 to VCC + 0.3
Operating temperature range, TA
−20 to 70
Storage temperature, Tstg
−55 to 125
Temperature under bias, TJbias
−40 to 85
°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
300
(2) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions”
is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
MIN
Supply voltage, VCC
Supply voltage from backup cell, VBC
2
MAX
3.0
3.6
2.0
4.0
Low-level input voltage, VIL
−0.3
0.8
High-level input voltage, VIH
2.2
VCC + 0.3
0.4
RST low-level input voltage, VIL
−0.3
RST high-level input voltage, VIH
2.2
Operating temperature range, TA
−20
www.ti.com
VCC + 0.3
70
UNIT
V
°C
SLUS581 − FEBRUARY 2004
ELECTRICAL CHARACTERISTICS
(TA = 25°C, VCC(min) ≤ VCC ≤ VCC(max) unless otherwise noted)
PARAMETER
TEST CONDITIONS
VCC supply current, ICC(vcc)
VCC > VCC(MIN)
CE = low
CECONX = 0 mA
Backup Battery Supply Current, ICC(BC)
VBC > VBC(MIN), VCC = 0 V
CE = low
CECONX = 0 mA
Output voltage (VOUT)
I(VOUT) = 80 mA, VCC > V(SO)
I(VOUT)= 100µ A, VCC < V(SO)
Power fail detect voltage, VPFD
MIN
TYP
MAX
UNIT
210
500
µA
50
150
nA
2.9
2.95
Vcc−0.3
VBC−0.3
2.85
Supply switch-over voltage, VSO
VBC > V(PFD)
VBC < V(PFD)
RST output voltage
I(RST) = 1 mA
0.4
BW output voltage
I(BW)= 1 mA
0.4
Input leakage current on A and CE pins
VPFD
VBC
−1
1
Voh CEcon1,2
Ioh = 0.5 mA
2.4
Vol CEcon1,2
Iol = 2.0 mA
(1)
0.4
Battery warning level VBW
V
µA
V
0.677xVCC
Capacitance
Output capacitance
VOUT = 0 V
7
Input capacitance
VOUT = 0 V
5
pF
Power-Down and Power-Up Timing, Refer to Figure 1 through 3
VCC slew rate fall time, tF
3.0 V to 0.0 V
300
VCC slew rate rise time, tR
VSO to VPFD(max)
100
VPFD to RST active, tRST
(reset active timeout period)
Chip-enable recovery time, tCER
µss
30
85
30
85
ms
(2)
Chip-enable propagation delay time to external
See Figure 2
15
25
ns
SRAM, tCED
Push-button low time, tPBL
RST pin
1
µs
(1) Battery warning level is detected on power up and the BW pin is latched at tCER time after VCC passes through VPFD on power up.
(2) Time during which external SRAM is write protected after VCC passes through VPFD on power up.
www.ti.com
3
SLUS581 − FEBRUARY 2004
AC TEST CONDITIONS, INPUT PULSE LEVELS 0 V ≤ VIN ≤ 3 V, tR = tF = 5 NS
TTL
CECONX
CL
(including scope
and JIG)
Figure 1. Output Load
tF
tR
VCC
VPFD(max)
VPFD
VCC
VPFD
VSO
VSO
tCED
tCER
tCED
CE
CECONX
tRST
RST
Figure 2. Power-Down/Power-Up Timing Diagram
tPBL
RST
tRST
VPBRH
VPBRL
Figure 3. Push-Button Reset Timing
4
www.ti.com
SLUS581 − FEBRUARY 2004
TERMINAL FUNCTIONS
TERMINAL
NAME
A
bq2205LY
1
I/O
DESCRIPTION
I
SRAM bank select input
BCP
9
I
Backup supply input
BW
15
O
Battery warning output (open-drain)
CE
11
I
Chip enable input (active low)
CECON1
CECON2
10
O
Conditioned chip enable output 1
14
O
Conditioned chip enable output 2
N/C
2, 3, 6, 7
−
No connect. These pins must be left floating.
RST
16
O
Power-up reset to system CPU output (open-drain)
VCC
VOUT
12
I
Main supply input
13
O
SRAM supply output
4, 5, 8
−
Ground input
VSS
PW PACKAGE
(TOP VIEW)
A
N/C
N/C
VSS
VSS
N/C
N/C
VSS
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
RST
BW
CECON2
VOUT
VCC
CE
CECON1
BCP
N/C no connection
www.ti.com
5
SLUS581 − FEBRUARY 2004
FUNCTIONAL DESCRIPTION
Two banks of CMOS static RAM can be battery-backed using the VOUT and conditioned chip-enable output
pins from the bq2205. As the voltage input VCC slews down during a power failure, the two-conditioned chip
enable outputs, CECON1 and CECON2, are forced inactive independent of the chip enable input, CE. This activity
unconditionally write-protects the external SRAM as VCC falls to an out-of-tolerance threshold VPFD. As the
supply continues to fall past VPFD, an internal switching device forces VOUT to the backup energy source.
CECON1 and CECON2 are held high by the VOUT energy source.
During power-up, VOUT is switched back to the 3.3-V supply as VCC rises above the backup cell input voltage
sourcing VOUT. Outputs CECON1 and CECON2 are held inactive for time tCER after the power supply has reached
VPFD, independent of the CE input, to allow for processor stabilization.
During power-valid operation, the CE input is passed through to one of the two CECONx outputs with a
propagation delay of less than tCED. The CE input is output on one of the two CECONx output pins; depending
on the level of bank select input A. See truth table below.
Table 1. Truth Table
INPUT
CE
OUTPUT
A
H
x
CECON1
H
CECON2
H
L
L
L
H
L
H
H
L
Bank select input A is usually tied to a high-order address pin so that a large nonvolatile memory can be
designed using lower-density memory devices. Non-volatility and decoding are achieved by hardware hookup
as shown in the application diagram.
The RST output can be used as the power-on reset for a microprocessor. Access to the external RAM may begin
when RST returns inactive.
BATTERY BACKUP INPUT
Backup energy source, BCP, input is provided on the bq2205 for use with an external primary cell. The primary
cell input is designed to accept any 3-V primary battery (non-rechargeable), typically some type of lithium
chemistry.
Power-Down and Power-Up Cycle
The bq2205 continuously monitors VCC for out-of-tolerance. During a power failure, when VCC falls below
VPFD, the bq2205 write-protects the external SRAM. The power source is switched to BCP when VCC is less
than VPFD and BCP is greater than VPFD, or when VCC is less than BCP and BCP is less than VPFD. When VCC
is above VPFD, the power source is VCC. Write-protection continues for tCER time after VCC rises above VPFD.
An external CMOS static RAM is battery-backed using the VOUT and chip enable output pins from the bq2205.
As the voltage input VCC slews down during a power failure, the chip enable output, CECONx, is forced inactive
independent of the chip enable input CE.
As the supply continues to fall past VPFD, an internal switching device forces VOUT to the external backup
energy source. CECONx is held high by the VOUT energy source.
6
www.ti.com
SLUS581 − FEBRUARY 2004
FUNCTIONAL DESCRIPTION
During power up, VOUT is switched back to the main supply as VCC rises above the backup cell input voltage
sourcing VOUT. If VPFD < BCP on the bq2205 the switch to the main supply occurs at VPFD. CECONx is held
inactive for time tCER after the power supply has reached VPFD, independent of the CE input, to allow for
processor stabilization.
Power-On Reset
The bq2205 provides a power-on reset, which pulls the RST pin low on power down and remains low on power
up for tRST after VCC passes VPFD. With valid battery voltage on BCP, RST remains valid for VCC = VSS. The
pull-up resistor on this pin should not exceed 10 kΩ if a push button reset is used.
Battery Low Warning
The bq2205 checks the battery voltage on power-up. The threshold for the battery warning comparator is VBW,
and a low level is sensed after power valid on each power up and latched after tCER time. The latched value
is presented at BW pin where a low indicates a low battery.
APPLICATION INFORMATION
PCB LAYOUT INFORMATION
It is important to pay special attention to the PCB layout. The following provides some guidelines:
D To obtain optimal performance, the decoupling capacitor from input terminals to VSS should be placed as
close as possible to the bq2205, with short trace runs to both signal and VSS pins.
D All low-current VSS connections should be kept separate from the high-current paths from the inputs
supplies. Use a single-point ground technique incorporating both the small signal ground path and the
power ground path.
www.ti.com
7
SLUS581 − FEBRUARY 2004
MECHANICAL DATA
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°−ā 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
8
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
www.ti.com
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
BQ2205LYPW
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
BQ2205LYPWG4
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
BQ2205LYPWR
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
BQ2205LYPWRG4
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
BQ2205LYPWR
Package Package Pins
Type Drawing
TSSOP
PW
16
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
2000
330.0
12.4
Pack Materials-Page 1
6.9
B0
(mm)
K0
(mm)
P1
(mm)
5.6
1.6
8.0
W
Pin1
(mm) Quadrant
12.0
Q1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
BQ2205LYPWR
TSSOP
PW
16
2000
367.0
367.0
35.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Mobile Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated