MIC BRS1005

MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
BRS1005 THRU BRS1010
50 to 1000 Volts
10 Amperes
VOLTAGE RANGE
CURRENT
FEATURES
l Low cost
l This series is UL recognized under component
index, file number E127707
l High forward surge current capability
l Ideal for printed circuit board
l High isolation voltage from case to leads
l High temperature soldering guaranteed:
260 oC/10 second, at 5 lbs. (2.3kg) tension.
0.52( 13.2)
0.48( 12.2)
°
0.07( 1.8) x45
0.16( 4.1)
0.14( 3.6) DIA
+
BRS-10
AC
0.52( 13.2)
0.48( 12.2)
AC
0.77( 19.6)
0.73( 18.5)
-
0.77( 19.6)
0.73( 18.5)
Metal Heat Sink
0.30( 7.6)
0.25( 6.4)
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Lead solderable per MIL-STD-202E method 208C.
l Polarity: Polarity symbols molded on case
l Mounting: Thru hole for #6 screw, 5 in.-lbs torque max.
l Weight:0.20ounce, 5.62 grams
0.85( 21.6) MIN
0.75( 19.0) MIN
0.08( 2.0) MIN
0.052( 1.3) DIA
0.048( 1.2) TYP
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
SYMBOLS BRS1005 BRS101
BRS102
BRS104
BRS106
BRS108 BRS1010
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Volts
TC=55℃(Note1)
Maximum Average Forward
Rectified Output Current, at TC=90℃(Note1)
10.0
I(AV)
5.0
TA=50℃(Note2)
Amps
6.0
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
150
Amps
Rating for Fusing (t<8.3ms)
Maximum Instantaneous Forward Voltage at 5.0A
I2T
VF
93
1.1
A2 S
Volts
Maximum DC Reverse Current at rated
DC blocking voltage
TA=25℃
5.0
µAmps
1.0
mAmps
IR
TA=150℃
Isolation Voltage from case to leads
VISO
2500
µAmps
Typical Thermal Resistance (Note 1)
RθJA
13
℃/W
Typical Thermal Resistance (Note 1)
RθJC
5
℃/W
TJ
-55 to +150
℃
TSTG
-55 to +150
℃
Operating Temperature Range
Storage Temperature Range
NOTES:
1.
Unit mounted on 8.7”×8.7”×0.24” thick (22×22×0.6 cm) Al. plate.
2.
Unit mounted on P.C.B at 0.375” (9.5mm) lead length with 0.47”×0.47” (12×12mm) copper pads.
E-mail: [email protected]
Web Site: www.cnmic.com
1/3
MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
BRS1005 THRU BRS1010
E-mail: [email protected]
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
10 Amperes
Web Site: www.cnmic.com
2/3
MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
BRS1005 THRU BRS1010
E-mail: [email protected]
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
10 Amperes
Web Site: www.cnmic.com
3/3