ETC BSS123-MR

September 1996
BSS100 / BSS123
N-Channel Logic Level Enhancement Mode Field Effect Transistor
General Description
Features
These N-Channel logic level enhancement mode power
field effect transistors are produced using Fairchild's
proprietary, high cell density, DMOS technology. This
very high density process has been especially tailored to
minimize on-state resistance, provide superior switching
performance. This product is particularly suited to low
voltage, low current applications, such as small servo
motor controls, power MOSFET gate drivers, and other
switching applications.
BSS100: 0.22A, 100V. RDS(ON) = 6Ω @ VGS = 10V.
BSS123: 0.17A, 100V. RDS(ON) = 6Ω @ VGS = 10V
High density cell design for extremely low RDS(ON).
Voltage controlled small signal switch.
Rugged and reliable.
_______________________________________________________________________________
D
G
BSS100
BSS123
Absolute Maximum Ratings
Symbol
Parameter
S
TA = 25°C unless otherwise noted
BSS100
BSS123
Units
VDSS
Drain-Source Voltage
100
V
VDGR
Drain-Gate Voltage (RGS < 20KΩ)
100
V
VGSS
Gate-Source Voltage - Continuous
± 14
V
- Non Repetitive (TP < 50 µS)
± 20
ID
Drain Current - Continuous
- Pulsed
0.22
0.17
0.9
0.68
0.63
0.36
A
PD
Total Power Dissipation @ TA = 25°C
W
TJ,TSTG
Operating and Storage Temperature Range
-55 to 150
°C
TL
Maximum Lead Temperature for Soldering
Purposes, 1/16" from Case for 10 Seconds
300
°C
THERMAL CHARACTERISTICS
RθJA
Thermal Resistacne, Junction-to-Ambient
© 1997 Fairchild Semiconductor Corporation
200
350
°C/W
BSS100 Rev. F1 / BSS123 Rev. F1
Electrical Characteristics (T
Symbol
A
= 25°C unless otherwise noted)
Parameter
Conditions
Type
Min
100
Typ
Max
Units
OFF CHARACTERISTICS
BVDSS
Drain-Source Breakdown Voltage
VGS = 0 V, ID = 250 µA
All
IDSS
Zero Gate Voltage Drain Current
VDS = 100 V, VGS = 0 V
BSS100
15
µA
VDS = 100 V, VGS = 0 V
BSS123
1
µA
VDS = 100 V, VGS = 0 V
IGSSF
Gate - Body Leakage, Forward
o
TJ=125 C
V
All
60
µA
VDS = 60 V, VGS = 0 V
BSS100
10
nA
VDS = 20 V, VGS = 0 V
BSS123
10
nA
VGS = 20 V, VDS = 0 V
BSS100
10
nA
VGS = 20 V, VDS = 0 V
BSS123
50
nA
All
1.4
2
V
Ω
ON CHARACTERISTICS (Note 1)
VGS(th)
Gate Threshold Voltage
VDS = VGS, ID = 1 mA
RDS(ON)
Static Drain-Source On-Resistance
VGS = 10 V, ID = 0.22 A
BSS100
2.8
6
VGS = 10 V, ID = 0.17 A
BSS123
2.8
6
VGS = 4.5 V, ID = 0.22 A
BSS100
3.2
10
VGS = 4.5 V, ID = 0.17 A
BSS123
3.2
10
VDS = 10 V, ID = 0.22 A
BSS100
0.08
0.4
VDS = 10 V, ID = 0.17 A
BSS123
0.08
0.4
VDS = 25 V, VGS = 0 V,
f = 1.0 MHz
All
29
60
pF
All
10
15
pF
All
2
6
pF
8
ns
gFS
Forward Transconductance
0.8
S
DYNAMIC CHARACTERISTICS
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
SWITCHING CHARACTERISTICS (Note 1)
tD(on)
Turn - On Delay Time
VDD = 30 V, ID = 0.28 A,
VGS = 10 V, RGEN = 50 Ω
tr
Turn - On Rise Time
All
8
ns
tD(off)
Turn - Off Delay Time
All
13
ns
tf
Turn - Off Fall Time
All
16
ns
Qg
Totall Gate Charge
Qgs
Gate-Source Charge
Qgd
Gate-Drain Charge
VDS = 10 V, ID = 0.22 A,
VGS = 10 V,
All
All
1.4
2
nC
All
0.15
0.25
nC
All
0.2
0.4
nC
BSS100
0.22
A
BSS123
0.17
BSS100
0.9
DRAIN-SOURCE DIODE CHARACTERISTICS AND MAXIMUM RATINGS
IS
Maximum Continuous Source Current
ISM
Maximum Pulse Source Current (Note 1)
BSS123
VSD
Drain-Source Diode Forward Voltage
A
0.68
VGS = 0 V, IS = 0.44 A
BSS100
0.9
1.3
VGS = 0 V, IS = 0.34 A
BSS123
0.9
1.3
V
Note:
1. Pulse Test: Pulse Width < 300 µs, Duty Cycle < 2.0%.
BSS100 Rev. F1 / BSS123 Rev. F1
Typical Electrical Characteristics
2 .4
0 .6
R DS(on) , NORMALIZED
3 .0
5 .0
4 .0
3 .5
0 .5
0 .4
2 .5
0 .3
0 .2
0 .1
2 .0
DRAIN-SOURCE ON-RESISTANCE
I D , DRAIN-SOURCE CURRENT (A)
V GS = 1 0 V
0
0
1
V
DS
2
3
, DRAIN-SOURCE VOLTAGE (V)
4
10
0 .1
0 .2
0 .3
0 .4
I , DRA IN CURRENT (A)
0 .5
0 .6
D
Figure 2. On-Resistance Variation with Gate
Voltage and Drain Current.
V GS = 10V
I D = 220m A
VGS =10V
R DS(on) , NORMALIZED
1 .8
1 .6
1 .4
1 .2
1
0 .8
0 .6
0 .4
-50
-25
0
25
50
75
100
TJ , JUNCTION TEM PERA T U RE (°C)
125
DRAIN-SOURCE ON-RESISTANCE
R DS(ON), NORMALIZED
1 .2
3
2
DRAIN-SOURCE ON-RESISTANCE
3 .5
4 .0
5 .0
0
2 .2
2 .5
TJ = 1 2 5 ° C
2
1 .5
25°C
1
-55°C
0 .5
0
150
0
Figure 3. On-Resistance Variation
with Temperature.
0 .2
0 .4
0 .6
ID , DRAIN CURRENT (A)
0 .8
1
Figure 4. On-Resistance Variation with Drain
Current and Temperature.
1.2
1 .15
VDS = V GS
I D = 250µA
BV DSS , NORMALIZED
1.1
1
0.9
0.8
-25
0
25
50
75
100
125
T J, JU N CTION TEMPERATURE (°C)
150
Figure 5. Gate Threshold Variation with
Temperature.
175
DRAIN-SOURCE BREAKDOWN VOLTAGE
Vth , NORMALIZED
GATE-SOURCE THRESHOLD VOLTAGE
3 .0
1 .6
0 .8
5
Figure 1. On-Region Characteristics.
0.7
-50
V GS = 2 .5 V
2
I D = 250µA
1 .1
1 .05
1
0 .95
0 .9
-50
-25
0
25
50
75
100
125
T J , JUNCTION TEMPERATURE (°C)
150
175
Figure 6. Breakdown Voltage Variation with
Temperature.
BSS100 Rev. F1 / BSS123 Rev. F1
Typical Electrical Characteristics (continued)
80
10
I D =220m A
VGS , GATE-SOURCE VOLTAGE (V)
50
CAPACITANCE (pF)
C iss
20
C oss
10
5
C rss
f = 1 MHz
V GS = 0V
1
0 .1
VDS = 5V
8
20
6
4
2
0
0 .2
0 .5
1
2
5
10
V DS , DRAIN TO SOURCE VOLTAGE (V)
50
Figure 7. Capacitance Characteristics.
0
0 .2
0 .4
0 .6
0 .8
1
Q g , GATE CHARGE (nC)
1 .2
1 .4
Figure 8. Gate Charge Characteristics.
VDS = 5V
T = -55°C
J
0 .6
25°C
0 .4
125°C
0 .2
g
FS
, TRANSCONDUCTANCE (SIEMENS)
0 .8
0
0
0 .1
0 .2
0 .3
0 .4
I D , DRAIN CURRENT (A)
0 .5
0 .6
Figure 9. Transconductance Variation with Drain
Current and Temperature.
t on
VDD
t d(on)
R GEN
tf
90%
90%
V OUT
D
VGS
tr
RL
V IN
t off
t d(off)
VOUT
10%
10%
INVERTED
DUT
G
90%
S
V IN
50%
50%
10%
PULSE W IDTH
Figure 10. Switching Test Circuit.
Figure 11. Switching Waveforms.
BSS100 Rev. F1 / BSS123 Rev. F1
2
2
10
1
RD
S(O
Li
N)
1m
10
0.2
10
0.1
0m
s
ms
s
1s
10
s
DC
0.05
VGS = 20V
SINGLE PULSE
TA = 25°C
0.01
10
1
s
I D , DRAIN CURRENT (A)
I D , DRAIN CURRENT (A)
0.5
t
mi
0u
0.5
RD
S(
)
ON
Lim
it
1m
0.2
10
0.1
10
0.05
0m
0u
s
s
ms
s
1s
10
s
DC
VGS = 20V
SINGLE PULSE
TA = 25°C
0.01
0.005
0.005
1
5
10
20
50
VDS , DRAIN-SOURCE VOLTAGE (V)
100 150
1
5
10
20
50
VDS , DRAIN-SOURCE VOLTAGE (V)
100 150
Figure 13. BSS123 Maximum Safe
Operating Area.
Figure 12. BSS100 Maximum Safe
Operating Area.
r(t), NORMALIZED EFFECTIVE
TRANSIENT THERMAL RESISTANCE
1
D = 0.5
0.5
R θJA (t) = r(t) * R θJA
o
R
θJA = 200 C/ W
0 .2
0.2
0.1
0.1
P(pk)
0.05
t1
0.05
0 .0 2
Single Pulse
0.02
0.01
0.0001
0.001
t2
TJ - T A = P * RθJA (t)
Duty Cycle, D = t1 /t2
0.01
0.01
0.1
t 1, TIME (sec)
1
10
100
300
Figure 14. BSS100 Transient Thermal Response Curve.
r(t), NORMALIZED EFFECTIVE
TRANSIENT THERMAL RESISTANCE
1
0.5
D = 0.5
0.2
0 .2
0.1
0.05
R θJA (t) = r(t) * R θJA
o
R
= 347 C/ W
θJA
0.1
0 .05
0 .02
P(pk)
0 .01
t1
0.01
t2
Single Pulse
TJ - T A = P * RθJA (t)
Duty Cycle, D = t1 /t2
0.002
0.001
0.0001
0.001
0.01
0.1
t1 , TIME (sec)
1
10
100
300
Figure 15. BSS123 Transient Thermal Response Curve.
BSS100 Rev. F1 / BSS123 Rev. F1
TO-92 Package Dimensions
TO-92; TO-18 Reverse Lead Form (J35Z Option)
(FS PKG Code 92, 94, 96)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.22
*
* ;
Note: All package 97 or 98 transistors are leadformed
to this configuration prior to bulk shipment. Order
L34Z option if in-line leads are preferred on package
97 or 98.
* Standard Option on 97 & 98 package code
January 2000, Rev. B
SOT-23 Tape and Reel Data and Package Dimensions
SOT-23 Packaging
Configuration: Figure 1.0
Customized Label
Packaging Description:
SOT-23 parts are shipped in tape. The carrier tape is
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
3,000 units per 7" or 177cm diameter reel. The reels are
dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13"
or 330cm diameter reel. This and some other options are
described in the Packaging Information table.
Antistatic Cover Tape
Human Readable
Label
These full reels are individually labeled and placed inside
a standard intermediate made of recyclable corrugated
brown paper with a Fairchil d logo printing. One pizza box
contains eight reels maximum. And these intermediate
boxes are placed inside a labeled shipping box which
comes in different sizes depending on the number of parts
shipped.
Embossed
Carrier Tape
3P
3P
3P
3P
SOT-23 Packaging Information
Packaging Option
Packaging type
Qty per Reel/Tube/Bag
Standard
(no flow code)
TNR
3,000
D87Z
7" Dia
13"
187x107x183
343x343x64
Max qty per Box
24,000
30,000
Weight per unit (gm)
0.0082
0.0082
Weight per Reel (kg)
0.1175
0.4006
Reel Size
Box Dimension (mm)
SOT-23 Unit Orientation
TNR
10,000
343mm x 342mm x 64mm
Intermediate box for L87Z Option
Human Readable Label
Note/Comments
Human Readable Label sample
H uman readable
Label
187mm x 107mm x 183mm
Intermediate Box for Standard Option
SOT-23 Tape Leader and Trailer
Configuration: Figure 2.0
Carrier Tape
Cover Tape
Components
Trailer Tape
300mm minimum or
75 empty poc kets
Leader Tape
500mm minimum or
125 empty pockets
September 1999, Rev. C
SOT-23 Tape and Reel Data and Package Dimensions, continued
SOT-23 Embossed Carrier Tape
Configuration: Figure 3.0
P0
P2
D0
D1
T
E1
W
F
E2
Wc
B0
Tc
A0
P1
K0
User Direction of Feed
Dimensions are in millimeter
Pkg type
A0
B0
SOT-23
(8mm)
3.15
+/-0.10
2.77
+/-0.10
W
8.0
+/-0.3
D0
D1
E1
E2
1.55
+/-0.05
1.125
+/-0.125
1.75
+/-0.10
F
6.25
min
3.50
+/-0.05
P1
P0
4.0
+/-0.1
4.0
+/-0.1
K0
T
1.30
+/-0.10
0.228
+/-0.013
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
Wc
0.06
+/-0.02
0.5mm
maximum
20 deg maximum
Typical
component
cavity
center line
B0
5.2
+/-0.3
Tc
0.5mm
maximum
20 deg maximum component rotation
Typical
component
center line
Sketch A (Side or Front Sectional View)
A0
Component Rotation
Sketch C (Top View)
Component lateral movement
Sketch B (Top View)
SOT-23 Reel Configuration: Figure 4.0
Component Rotation
W1 Measured at Hub
Dim A
Max
Dim A
max
See detail AA
Dim N
7" Diameter Option
B Min
Dim C
See detail AA
W3
13" Diameter Option
Dim D
min
W2 max Measured at Hub
DETAIL AA
Dimensions are in inches and millimeters
Tape Size
Reel
Option
Dim A
Dim B
Dim C
Dim D
Dim N
Dim W1
Dim W2
Dim W3 (LSL-USL)
8mm
7" Dia
7.00
177.8
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
2.165
55
0.331 +0.059/-0.000
8.4 +1.5/0
0.567
14.4
0.311 – 0.429
7.9 – 10.9
8mm
13" Dia
13.00
330
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
4.00
100
0.331 +0.059/-0.000
8.4 +1.5/0
0.567
14.4
0.311 – 0.429
7.9 – 10.9
September 1999, Rev. C
SOT-23 Tape and Reel Data and Package Dimensions, continued
SOT-23 (FS PKG Code 49)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.0082
September 1998, Rev. A1
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench 
QFET™
QS™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
ACEx™
CoolFET™
CROSSVOLT™
E2CMOSTM
FACT™
FACT Quiet Series™
FAST®
FASTr™
GTO™
HiSeC™
SyncFET™
TinyLogic™
UHC™
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
2. A critical component is any component of a life
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. D