ROHM BU7462SNUX-TR

Operational Amplifiers / Comparators
Ground Sense Low Voltage
Operation CMOS Operational Amplifiers
BU7461G, BU7461SG, BU7441G, BU7441SG, BU7462F/FVM/NUX, BU7462SF/FVM/NUX,
BU7442F/FVM/NUX, BU7442SF/FVM/NUX, BU7464F, BU7464SF, BU7444F, BU7444SF,
BU7465HFV, BU7465SHFV, BU7445HFV, BU7445SHFV
No.10049JET21
●Description
Low Voltage CMOS Op-Amp integrates one or two independent outputs full swing Op-Amps and phase compensation
capacitors on a single chip. Especially, this series is operable with low voltage, low supply current and low input bias current.
Ground Sense : BU7461 (BU7461S) family, BU7441 (BU7441S) family, BU7462 (BU7462S) family,
BU7442 (BU7442S) family, BU7464 (BU7464S) family, BU7444 (BU7444S) family,
BU7465 (BU7465S) family, BU7445 (BU7445S) family,
●Features
1) Operable with low voltage
+1.7[V] ~ +5.5[V] (Single supply) :
BU7461/BU7441 family, BU7462/BU7442 family
BU7464/BU7444 family, BU7465/BU7445 family
2) Input Ground Sense, Output Full Swing
3) High speed operation (BU7461 family, BU7462 family)
4) Internal phase compensation
5) Wide temperature range
-40[℃] ~ +85[℃]
(BU7461G, BU7462 family, BU7464F, BU7465HFV)
(BU7441G, BU7442 family, BU7444F, BU7445HFV)
-40[℃] ~ +105[℃]
(BU7461SG, BU7462S family, BU7464SF, BU7465SHFV)
(BU7441SG, BU7442S family, BU7444SF, BU7445SHFV)
Ground Sense
High speed
Single
6) High open loop voltage gain
7) Low supply current
(BU7441 family, BU7442 family)
(BU7445 family, BU7444 family)
8) Low input bias current 1[pA](Typ.)
9) ESD protection circuit
Human body mode (HBM)±4000[V](Typ.)
BU7461G
(BU7461SG:Operation guaranteed up to +105℃)
BU7465HFV
(BU7465SHFV::Operation guaranteed up to +105℃)
Dual
BU7462F/FVM/NUX
(BU7462S F/FVM/NUX:Operation guaranteed up to +105℃)
Quad
BU7464F
(BU7464SF:Operation guaranteed up to +105℃)
Low power
Single
BU7441G
(BU7441SG:Operation guaranteed up to +105℃)
BU7445HFV
(BU7445SHFV:Operation guaranteed up to +105℃)
Dual
BU7442F/FVM/NUX
(BU7442S F/FVM/NUX:Operation guaranteed up to +105℃)
Quad
BU7444F
(BU7444SF:Operation guaranteed up to +105℃)
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
1/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Pin Assignments
OUT1 1
IN+ 1
VSS 2
IN-
+
IN1-
-
IN1+
3
8 VDD
OUT1 1
5 VDD
4 OUT
VSS
2
CH1
－ ＋
7 OUT2
CH2
＋ －
3
IN1- 2
6 IN2-
CH4
＋ －
IN1+ 3
12 IN4+
11 VSS
IN2+ 5
IN2- 6
10 IN3+
－ ＋
CH2
＋ －
CH3
OUT2 7
SSOP5
HVSOF5
SOP8
MSOP8
13 IN4-
VDD 4
5 IN2+
4
14 OUT4
CH1
－ ＋
VSON008X2030
9 IN38 OUT3
SOP14
Package
Input type
SSOP5
Ground Sense
HVSOF5
BU7461G
BU7461SG
BU7441G
BU7441SG
BU7465HFV
BU7465SHFV
BU7445HFV
BU7445SHFV
SOP8
BU7462F
BU7462SF
BU7442F
BU7442SF
VSON008X2030
MSOP8
BU7462NUX
BU7462SNUX
BU7442NUX
BU7442SNUX
BU7462FVM
BU7462SFVM
BU7442FVM
BU7442SFVM
SOP14
BU7464F
BU7464SF
BU7444F
BU7444SF
●Absolute maximum rating (Ta=25[℃])
Rating
Parameter
Supply Voltage
Symbol
BU7461G, BU7462F/FVM/NUX
BU7441G, BU7442F/FVM/NUX
BU7464F, BU7444F
BU7445HFV, BU7465HFV
BU7461SG, BU7462S F/FVM/NUX
BU7441SG, BU7442S F/FVM/NUX Unit
BU7464SF, BU7444SF
BU7445SHFV, BU7465SHFV
VDD-VSS
+7
V
Vid
VDD－VSS
V
Input Common-mode
Voltage Range
Vicm
(VSS－0.3) ~ (VDD+0.3)
V
Operating Temperature
Topr
Storage Temperature
Tstg
-55 ~ +125
℃
Maximum
Junction Temperature
Tjmax
+125
℃
Differential Input Voltage(*1)
-40 ~ +85
-40 ~ +105
℃
Note: Absolute maximum rating item indicates the condition which must not be exceeded.
Application of voltage in excess of absolute maximum rating or use out absolute maximum rated temperature environment
may cause deterioration of characteristics.
(*1) The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input terminal voltage is set to more than VSS.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
2/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Electrical characteristics
○BU7461 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
Temperature
Range
BU7461G, BU7461SG
Min.
Typ.
Max.
Unit
Condition
Input Offset Voltage (*2)
Vio
25℃
-
1
6
mV
－
Input Offset Current (*2)
Iio
25℃
-
1
-
pA
－
Input Bias Current (*2)
Ib
25℃
-
1
-
pA
－
25℃
-
150
350
Full range
-
-
450
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=0.9[V]
-
V
RL=10[kΩ]
-
VSS+0.1
V
RL=10[kΩ]
70
95
-
dB
RL=10[kΩ]
25℃
0
-
1.8
V
VSS ~ VDD-1.2[V]
CMRR
25℃
45
60
-
dB
－
PSRR
25℃
60
80
-
dB
－
Output Source Current (*4)
IOH
25℃
4
8
-
mA
VDD-0.4[V]
Output Sink Current (*4)
IOL
25℃
6
12
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
1.0
-
V/μs
CL=25[pF]
Gain Band width
FT
25℃
-
1
-
MHz
CL=25[pF], AV=40[dB]
θ
25℃
-
50
-
°
CL=25[pF], AV=40[dB]
THD
25℃
-
0.05
-
%
VOUT=1[Vp-p]
f=1[kHz]
Supply Current (*3)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
Low Level Output Voltage
VOL
25℃
-
Large Signal Voltage Gain
AV
25℃
Vicm
Common-mode
Rejection Ratio
Power Supply
Rejection Ratio
Input Common-mode
Voltage Range
Phase Margin
Total Harmonic Distortion
(*2)
(*3)
(*4)
Absolute value
Full range: BU7461: Ta=-40[℃] to +85[℃] BU7461S: Ta=-40[℃] to +105[℃]
Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
3/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
○BU7462 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
Temperature
Range
BU7462F/FVM/NUX
BU7462S F/FVM/NUX
Min.
Typ.
Max.
Unit
Condition
Input Offset Voltage (*5)
Vio
25℃
-
1
6
mV
－
Input Offset Current (*5)
Iio
25℃
-
1
-
pA
－
Input Bias Current (*5)
Ib
25℃
-
1
-
pA
－
25℃
-
300
700
Full range
-
-
900
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=0.9[V]
-
V
RL=10[kΩ]
-
VSS+0.1
V
RL=10[kΩ]
70
95
-
dB
RL=10[kΩ]
25℃
0
-
1.8
V
VSS ~ VDD-1.2[V]
CMRR
25℃
45
60
-
dB
－
PSRR
25℃
60
80
-
dB
－
Output Source Current (*7)
IOH
25℃
4
8
-
mA
VDD-0.4[V]
Output Sink Current (*7)
IOL
25℃
6
12
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
1.0
-
V/μs
CL=25[pF]
Gain Band width
FT
25℃
-
1
-
MHz
CL=25[pF], AV=40[dB]
θ
25℃
-
50
-
°
CL=25[pF], AV=40[dB]
THD
25℃
-
0.05
-
%
VOUT=1[Vp-p] ,
f=1[kHz]
CS
25℃
-
100
-
dB
AV=40[dB]
Supply Current (*6)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
Low Level Output Voltage
VOL
25℃
-
Large Signal Voltage Gain
AV
25℃
Vicm
Common-mode
Rejection Ratio
Power Supply
Rejection Ratio
Input Common-mode
Voltage Range
Phase Margin
Total Harmonic Distortion
Channel Separation
(*5)
(*6)
(*7)
Absolute value
Full range: BU7261, BU7262: Ta=-40[℃] to +85[℃] BU7462S: Ta=-40[℃] to +105[℃]
Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
4/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
○BU7464 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
BU7464F
BU7464SF
Temperature
Range
Min.
Typ.
Max.
Unit
Condition
Input Offset Voltage (*5)
Vio
25℃
-
1
6
mV
－
Input Offset Current (*5)
Iio
25℃
-
1
-
pA
－
Input Bias Current (*5)
Ib
25℃
-
1
-
pA
－
25℃
-
600
1400
Full range
-
-
1800
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=0.9[V]
-
V
RL=10[kΩ]
-
VSS+0.1
V
RL=10[kΩ]
70
95
-
dB
RL=10[kΩ]
25℃
0
-
1.8
V
VSS ~ VDD-1.2[V]
CMRR
25℃
45
60
-
dB
－
PSRR
25℃
60
80
-
dB
－
Output Source Current (*7)
IOH
25℃
4
8
-
mA
VDD-0.4[V]
Output Sink Current (*7)
IOL
25℃
6
12
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
1.0
-
V/μs
CL=25[pF]
Gain Band width
FT
25℃
-
1
-
MHz
CL=25[pF], AV=40[dB]
θ
25℃
-
50
-
°
CL=25[pF], AV=40[dB]
THD
25℃
-
0.05
-
%
VOUT=0.8[Vp-p],
f=1[kHz]
CS
25℃
-
100
-
dB
AV=40[dB]
Supply Current (*6)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
Low Level Output Voltage
VOL
25℃
-
Large Signal Voltage Gain
AV
25℃
Vicm
Common-mode
Rejection Ratio
Power Supply
Rejection Ratio
Input Common-mode
Voltage Range
Phase Margin
Total Harmonic Distortion
Channel Separation
(*8) Absolute value
(*9) Full range: BU7464: Ta=-40[℃] to +85[℃] BU7464S: Ta=-40[℃] to +105[℃]
(*10) Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
5/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
○BU7465 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
BU7465HFV
BU7465SHFV
Temperature
Range
Min.
Typ.
Max.
Unit
Condition
Input Offset Voltage (*5)
Vio
25℃
-
1
6
mV
－
Input Offset Current (*5)
Iio
25℃
-
1
-
pA
－
Input Bias Current (*5)
Ib
25℃
-
1
-
pA
－
25℃
-
120
300
Full range
-
-
400
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=0.9[V]
-
V
RL=10[kΩ]
-
VSS+0.1
V
RL=10[kΩ]
60
100
-
dB
RL=10[kΩ]
25℃
0
-
1.8
V
VSS ~ VDD-1.2[V]
CMRR
25℃
45
60
-
dB
－
PSRR
25℃
60
80
-
dB
－
Output Source Current (*7)
IOH
25℃
4
8
-
mA
VDD-0.4[V]
Output Sink Current (*7)
IOL
25℃
9
18
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
1.0
-
V/μs
CL=25[pF]
Gain Band width
FT
25℃
-
1.2
-
MHz
CL=25[pF], AV=40[dB]
θ
25℃
-
60
-
°
CL=25[pF], AV=40[dB]
THD
25℃
-
0.05
-
%
VOUT=0.8[Vp-p],
f=1[kHz]
Supply Current (*6)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
Low Level Output Voltage
VOL
25℃
-
Large Signal Voltage Gain
AV
25℃
Vicm
Common-mode
Rejection Ratio
Power Supply
Rejection Ratio
Input Common-mode
Voltage Range
Phase Margin
Total Harmonic Distortion
(*11) Absolute value
(*12) Full range: BU7465: Ta=-40[℃] to +85[℃] BU7465S: Ta=-40[℃] to +105[℃]
(*13) Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
6/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
○BU7441 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
Temperature
Range
BU7441G, BU7441SG
Min.
Typ.
Max.
Unit
Condition
Input Offset Voltage (*14)
Vio
25℃
-
1
6
mV
－
Input Offset Current (*14)
Iio
25℃
-
1
-
pA
－
Input Bias Current (*14)
Ib
25℃
-
1
-
pA
－
25℃
-
50
120
Full range
-
-
240
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=0.9[V]
-
V
RL=10[kΩ]
-
VSS+0.1
V
RL=10[kΩ]
70
95
-
dB
RL=10[kΩ]
25℃
0
-
1.8
V
VSS ~ VDD-1.2[V]
CMRR
25℃
45
60
-
dB
－
PSRR
25℃
60
80
-
dB
－
Output Source Current (*16)
IOH
25℃
3
6
-
mA
VDD-0.4[V]
Output Sink Current (*16)
IOL
25℃
5
10
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
0.3
-
V/μs
CL=25[pF]
Gain Band width
FT
25℃
-
0.6
-
MHz
CL=25[pF], AV=40[dB]
θ
25℃
-
50
-
°
CL=25[pF], AV=40[dB]
THD
25℃
-
0.05
-
%
VOUT=1[Vp-p], f=1[kHz]
Supply Current (*15)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
Low Level Output Voltage
VOL
25℃
-
Large Signal Voltage Gain
AV
25℃
Vicm
Common-mode
Rejection Ratio
Power Supply
Rejection Ratio
Input Common-mode
Voltage Range
Phase Margin
Total Harmonic Distortion
(*14) Absolute value
(*15) Full range: BU7441: Ta=-40[℃] to +85[℃] BU7441S: Ta=-40[℃] to +105[℃]
(*16) Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
7/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
○BU7442 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
Temperature
Range
BU7442F/FVM/NUX
BU7442S F/FVM/NUX
Min.
Typ.
Max.
Unit
Condition
Input Offset Voltage (*17)
Vio
25℃
-
1
6
mV
－
Input Offset Current (*17)
Iio
25℃
-
1
-
pA
－
Input Bias Current (*17)
Ib
25℃
-
1
-
pA
－
25℃
-
100
240
Full range
-
-
480
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=0.9[V]
-
V
RL=10[kΩ]
-
VSS+0.1
V
RL=10[kΩ]
70
95
-
dB
RL=10[kΩ]
25℃
0
-
1.8
V
VSS ~ VDD-1.2[V]
CMRR
25℃
45
60
-
dB
－
PSRR
25℃
60
80
-
dB
－
Output Source Current (*19)
IOH
25℃
3
6
-
mA
VDD-0.4[V]
Output Sink Current (*19)
IOL
25℃
5
10
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
0.3
-
V/μs
CL=25[pF]
Gain Band width
FT
25℃
-
0.6
-
MHz
CL=25[pF], AV=40[dB]
θ
25℃
-
50
-
°
CL=25[pF], AV=40[dB]
THD
25℃
-
0.05
-
%
VOUT=1[Vp-p], f=1[kHz]
CS
25℃
-
100
-
dB
AV=40[dB]
Supply Current (*18)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
Low Level Output Voltage
VOL
25℃
-
Large Signal Voltage Gain
AV
25℃
Vicm
Common-mode
Rejection Ratio
Power Supply
Rejection Ratio
Input Common-mode
Voltage Range
Phase Margin
Total Harmonic Distortion
Channel Separation
(*17) Absolute value
(*18) Full range: BU7442: Ta=-40[℃] to +85[℃] BU7442S: Ta=-40[℃] to +105[℃]
(*19) Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
8/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
○BU7444 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
Temperature
Range
BU7444F, BU7444SF
Min.
Typ.
Max.
Unit
Condition
Input Offset Voltage (*20)
Vio
25℃
-
1
6
mV
－
Input Offset Current (*20)
Iio
25℃
-
1
-
pA
－
Input Bias Current (*20)
Ib
25℃
-
1
-
pA
－
25℃
-
200
480
Full range
-
-
960
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=0.9[V]
-
V
RL=10[kΩ]
-
VSS+0.1
V
RL=10[kΩ]
70
95
-
dB
RL=10[kΩ]
25℃
0
-
1.8
V
VSS ~ VDD-1.2[V]
CMRR
25℃
45
60
-
dB
－
PSRR
25℃
60
80
-
dB
－
Output Source Current (*22)
IOH
25℃
3
6
-
mA
VDD-0.4[V]
Output Sink Current (*22)
IOL
25℃
5
10
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
0.3
-
V/μs
CL=25[pF]
Gain Band width
FT
25℃
-
0.6
-
MHz
CL=25[pF], AV=40[dB]
θ
25℃
-
50
-
°
CL=25[pF], AV=40[dB]
THD
25℃
-
0.05
-
%
VOUT=0.8[Vp-p],
f=1[kHz]
CS
25℃
-
100
-
dB
AV=40[dB]
Supply Current (*21)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
Low Level Output Voltage
VOL
25℃
-
Large Signal Voltage Gain
AV
25℃
Vicm
Common-mode
Rejection Ratio
Power Supply
Rejection Ratio
Input Common-mode
Voltage Range
Phase Margin
Total Harmonic Distortion
Channel Separation
(*20) Absolute value
(*21) Full range: BU7444: Ta=-40[℃] to +85[℃] BU7444S: Ta=-40[℃] to +105[℃]
(*22) Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
9/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
○BU7445 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Parameter
Symbol
Limits
Temperature
BU7445HFV, BU7445SHFV
Range
Min.
Typ.
Max.
Unit
Condition
Input Offset Voltage (*23)
Vio
25℃
-
1
6
mV
－
Input Offset Current (*23)
Iio
25℃
-
1
-
pA
－
Input Bias Current (*23)
Ib
25℃
-
1
-
pA
－
25℃
-
40
90
Full range
-
-
120
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=0.9[V]
-
V
RL=10[kΩ]
-
VSS+0.1
V
RL=10[kΩ]
60
100
-
dB
RL=10[kΩ]
25℃
0
-
1.8
V
VSS ~ VDD-1.2[V]
CMRR
25℃
45
60
-
dB
－
PSRR
25℃
60
80
-
dB
－
Output Source Current (*25)
IOH
25℃
4
8
-
mA
VDD-0.4[V]
Output Sink Current (*25)
IOL
25℃
9
18
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
0.25
-
V/μs
CL=25[pF]
Gain Band width
FT
25℃
-
0.4
-
MHz
CL=25[pF], AV=40[dB]
θ
25℃
-
60
-
°
CL=25[pF], AV=40[dB]
THD
25℃
-
0.05
-
%
VOUT=0.8[Vp-p],
f=1[kHz]
Supply Current (*24)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
Low Level Output Voltage
VOL
25℃
-
Large Signal Voltage Gain
AV
25℃
Vicm
Common-mode
Rejection Ratio
Power Supply
Rejection Ratio
Input Common-mode
Voltage Range
Phase Margin
Total Harmonic Distortion
(*23) Absolute value
(*24) Full range: BU7445: Ta=-40[℃] to +85[℃] BU7445S: Ta=-40[℃] to +105[℃]
(*25) Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
10/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Reference data (BU7461 family)
BU7461 family
BU7461G
400
200
600
BU7461SG
400
200
85 100
Fig.2
5.5V
200
0
1.7V
30
60
85℃
25℃
105℃
2
0
2
4
Fig.4
BU7461 family
6
-60
-30
0
30
85℃
105℃
3
25℃
-40℃
6
120
Fig.6
(RL=10[kΩ])
(RL=10[kΩ])
BU7461 family
6
5.5V
4
1.7V
2
3.0V
BU7461 family
40
-40℃
30
25℃
20
85℃
105℃
10
0
-60
-30
0
30
60
90
0
120
1
2
3
OUTPUT VOLTAGE [V]
AMBIENT TEMPERATURE [°C]
SUPPLY VOLTAGE [V]
Fig.7
90
Output Voltage High – Ambient Temperature
0
4
60
AMBIENT TEMPERATURE [°C]
Output Voltage High – Supply Voltage
8
OUTPUT VOLTAGE LOW [mV]
9
2
1.7V
2
Fig.5
12
0
3.0V
SUPPLY VOLTAGE [V]
Supply Current – Ambient Temperature
0
5.5V
4
0
120
AMBIENT TEMPERATURE [°C]
6
BU7461 family
6
0
90
6
Fig.3
-40℃
4
4
Supply Current – Supply Voltage
BU7461 family
6
OUTPUT VOLTAGE HIGH [V]
Fig.8
Fig.9
Output Voltage Low – Supply Voltage
Output Voltage Low – Ambient Temperature
Output Source Current – Output Voltage
(RL=10[kΩ])
(RL=10[kΩ])
(VDD=3.0[V])
BU7461 family
5.5V
15
3.0V
10
1.7V
5
BU7461 family
80
OUTPUT SINK CURRENT [mA]
20
-40℃
25℃
60
40
105℃
85℃
20
0
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE [°C]
Fig.10
BU7461 family
60
OUTPUT SINK CURRENT [mA]
SUPPLY CURRENT [uA]
400
-30
2
SUPPLY VOLTAGE [V]
Derating curve
600
-60
0
150
AMBIENT TEMPERATURE [°C]
BU7461 family
3.0V
100105
50
Fig.1
0
25℃
0
0
150
Derating curve
800
85℃
-40℃
OUTPUT VOLTAGE HIGH [V]
50
AMBIENT TEMPERATURE [°C]
OUTPUT VOLTAGE LOW [mV]
100
OUTPUT SINK CURRENT [mA]
0
OUTPUT SOURCE CURRENT [mA]
105℃
200
0
0
BU7461 family
300
SUPPLY CURRENT [μA]
600
BU7461 family
800
POWER DISSIPATION [mW]
POWER DISSIPATION [mW]
800
40
5.5V
20
3.0V
1.7V
0
0
1
2
3
OUTPUT VOLTAGE [V]
Fig.11
Output Source Current – Ambient Temperature
Output Sink Current – Output Voltage
(VOUT=VDD-0.4[V])
(VDD=3[V])
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE [°C]
Fig.12
Output Sink Current – Ambient Temperature
(VOUT=VSS+0.4[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7461G: -40[℃] ~ +85[℃] BU7461SG: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
11/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
7.5
5.0
-40℃
2.5
25℃
0.0
-2.5
105℃
85℃
-5.0
-7.5
-10.0
BU7461 family
10.0
7.5
5.0
3.0V
0.0
-2.5
1.7V
-5.0
-7.5
3
4
5
6
-60
-30
0
30
Fig.13
140
-40℃
100
85℃
105℃
80
60
2
3
4
5
100
1.7V
80
60
-60
6
-30
0
30
60
90
3.0V
1.7V
40
20
0
60
90
120
80
60
40
20
105℃
100
80
25℃
85℃
60
40
20
0
0
1
2
-60
-30
0
30
60
90
100
GAIN [dB]
0.8
1.2
0.8
1.7V
0.4
-30
90
120
AMBIENT TEMPERATURE [°C]
Fig.22
Slew Rate H-L – Ambient Temperature
30
60
90
120
Slew Rate L-H – Ambient Temperature
200
100
Gain
40
1.E+00
0
AMBIENT TEMPERATURE [°C]
60
50
0
60
5.5V
3.0V
150
20
0.0
6
1.6
-60
120
BU7461 family
Phase
1.7V
0.4
5
Fig.21
80
3.0V
4
BU7461 family
Fig.20
5.5V
3
0.0
0
Large Signal Voltage Gain
– Ambient Temperature
1.6
-40℃
2.0
AMBIENT TEMPERATURE [°C]
BU7461 family
30
BU7461 family
120
Common Mode Rejection Ratio
– Supply Voltage
BU7461 family
Fig.19
2.0
3
SUPPLY VOLTAGE [V]
100
Common Mode Rejection Ratio
– Ambient Temperature
2
Fig.18
120
AMBIENT TEMPERATURE [°C]
0
120
SLEW RATE L-H [V/μs]
80
POWER SUPPLY REJECTION RATIO [dB]
COMMON MODE REJECTION RATIO [dB]
100
-30
1
Input Offset Voltage – Input Voltage
Power Supply Rejection Ratio
– Ambient Temperature
5.5V
-60
0
AMBIENT TEMPERATURE [°C]
BU7461 family
1.2
-15
Fig.17
120
30
5.5V
120
Fig.16
0
-10
(VDD=3[V])
BU7461 family
3.0V
105℃
INPUT VOLTAGE [V]
140
Large Signal Voltage Gain
– Supply Voltage
-30
85℃
-5
Fig.15
160
SUPPLY VOLTAGE [V]
-60
0
-1
(Vicm= VDD-1.2[V], VOUT= VDD/2)
LARGE SIGNAL VOLTAGE GAIN [dB]
LARGE SIGNAL VOLTAGE GAIN [dB]
BU7461 family
1
-40℃
Fig.14
160
0
25℃
5
120
Input Offset Voltage – Ambient Temperature
(Vicm= VDD-1.2[V], VOUT= VDD/2)
25℃
90
10
AMBIENT TEMPERATURE [°C]
Input Offset Voltage – Supply Voltage
120
60
COMMON MODE REJECTION RATIO [dB]
2
BU7461 family
15
PHASE [deg]
1
SUPPLY VOLTAGE [V]
SLEW RATE H-L [V/μs]
5.5V
2.5
-10.0
0
60
INPUT OFFSET VOLTAGE [mV]
BU7461 family
10.0
INPUT OFFSET VOLTAGE [mV]
INPUT OFFSET VOLTAGE [mV]
●Reference data (BU7461 family)
0
1.E+02
1.E+04 1.E+06
1.E+08
FREQUENCY [Hz]
Fig.23
Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7461G: -40[℃] ~ +85[℃] BU7461SG: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
12/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Reference data (BU7462 family)
POWER
[mW]
POWERDISSIPATION
DISSIPATION [mW]
600
BU7462FVM
600
BU7462NUX
400
400
200
200
00
00
800
600
BU7462SNUX
400
400
200
200
00
85
00
Fig.24
3.0V
1.7V
0
0
-40℃
85℃
25℃
105℃
2
0
30
60
90
BU7462 family
8
5.5V
6
4
3.0V
2
1.7V
2
4
-60
6
Fig.27
-30
0
Fig.29
(RL=10[kΩ])
3
25℃
-40℃
BU7462 family
8
6
5.5V
4
3.0V
2
1.7V
2
4
-60
6
-30
0
30
Fig.30
(RL=10[kΩ])
90
1
3.0V
10
1.7V
5
25℃
40
85℃
20
105℃
0
0
60
90
120
AMBIENT TEMPERATURE [°C]
Output Source Current – Output Voltage
(VDD=3.0[V])
BU7462 family
60
40
5.5V
20
3.0V
1.7V
0
0
1
3
Fig.32
-40℃
60
2
OUTPUT VOLTAGE [V]
BU7462 family
80
OUTPUT SINK CURRENT [mA]
5.5V
30
0
(RL=10[kΩ])
15
0
105℃
10
120
Output Voltage Low – Ambient Temperature
BU7462 family
20
-30
20
Fig.31
Output Voltage Low – Supply Voltage
-60
25℃
AMBIENT TEMPERATURE [°C]
SUPPLY VOLTAGE [V]
OUTPUT SOURCE CURRENT [mA]
60
OUTPUT SINK CURRENT [mA]
0
-40℃
85℃
30
0
0
0
BU7462 family
40
OUTPUT SINK CURRENT [mA]
105℃
85℃
120
Output Voltage High – Ambient Temperature
OUTPUT VOLTAGE LOW [mV]
OUTPUT VOLTAGE LOW [mV]
6
90
Fig.28
BU7462 family
9
60
Output Voltage High – Supply Voltage
(RL=10[kΩ])
12
30
AMBIENT TEMPERATURE [°C]
SUPPLY VOLTAGE [V]
AMBIENT TEMPERATURE [°C]
Supply Current – Ambient Temperature
6
0
0
120
2
4
SUPPLY VOLTAGE [V]
Supply Current – Supply Voltage
0
0
-30
100
BU7462 family
4
25℃
-40℃
Fig.26
6
OUTPUT VOLTAGE HIGH [V]
SUPPLY CURRENT [μA]
5.5V
-60
200
Fig.25
600
200
300
Derating curve
BU7462 family
85℃
400
105
50
100
150
50
100
150
AMBIENT
TEMPERATURE[℃]
AMBIENT
AMBIENTTEMPERATURE[℃]
TEMPERATURE [°C]
Derating curve
400
105℃
BU7462SFVM
600
50
100
150
50
100
150
AMBIENT TEMPERATURE[℃]
AMBIENT
AMBIENT TEMPERATURE[℃]
TEMPERATURE [°C]
800
BU7462 family
500
BU7462SF
OUTPUT VOLTAGE HIGH [V]
POWER
DISSIPATION [mW]
POWER DISSIPATION [mW]
BU7462F
800
BU7462 family
800
1000
SUPPLY CURRENT [μA]
BU7462 family
800
1000
2
3
OUTPUT VOLTAGE [V]
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE [°C]
Fig.33
Fig.34
Fig.35
Output Source Current – Ambient Temperature
Output Sink Current – Output Voltage
Output Sink Current – Ambient Temperature
(VOUT=VDD-0.4[V])
(VDD=3[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7462F/FVM/NUX: -40[℃] ~ +85[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
13/36
(VOUT=VSS+0.4[V])
BU7462S F/FVM/NUX: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Reference data (BU7462 family)
INPUT OFFSET VOLTAGE [mV]
5.0
-40℃
2.5
25℃
0.0
-2.5
105℃
85℃
-5.0
-7.5
-10.0
7.5
5.0
3.0V
2.5
0.0
1.7V
-7.5
2
3
4
5
6
-60
-30
SUPPLY VOLTAGE [V]
0
30
Fig.36
140
105℃
25℃
120
100
85℃
-40℃
60
2
3
4
5
5.5V
120
100
3.0V
80
60
-60
-30
0
30
0
0
30
90
120
60
90
120
BU7462 family
80
40
0
0
0
1
2
BU7462 family
-30
0
30
60
90
GAIN [dB]
1.2
0.8
120
BU7462 family
Phase
120
AMBIENT TEMPERATURE [°C]
Fig.45
Slew Rate H-L – Ambient Temperature
www.rohm.com
1.2
0.8
1.7V
0.4
-60
-30
0
30
60
90
120
200
100
Gain
40
50
1.E+00
0
1.E+02
1.E+04
1.E+06
1.E+08
FREQUENCY [Hz]
Fig.46
Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7462F/FVM/NUX: -40[℃] ~ +85[℃]
© 2010 ROHM Co., Ltd. All rights reserved.
5.5V
3.0V
150
0
90
1.6
Fig.44
60
20
60
BU7462 family
Slew Rate L-H – Ambient Temperature
3.0V
0.0
6
Power Supply Rejection Ratio
– Ambient Temperature
1.7V
0.4
5
AMBIENT TEMPERATURE [°C]
80
5.5V
4
AMBIENT TEMPERATURE [°C]
100
1.6
3
0.0
-60
Fig.43
2.0
30
20
2.0
120
Fig.42
0
40
Common Mode Rejection Ratio
– Supply Voltage
160
Common Mode Rejection Ratio
– Ambient Temperature
-30
25℃
85℃
60
Fig.41
200
AMBIENT TEMPERATURE [°C]
-60
80
SUPPLY VOLTAGE [V]
SLEW RATE L-H [V/μs]
20
POWER SUPPLY REJECTION RATIO [dB]
COMMON MODE REJECTION RATIO [dB]
1.7V
40
-30
60
105℃
-40℃
100
Fig.40
80
3
BU7462 family
120
Large Signal Voltage Gain
– Ambient Temperature
100
2
Input Offset Voltage – Input Voltage
AMBIENT TEMPERATURE [°C]
BU7462 family
-60
1
(VDD=3[V])
1.7V
Fig.39
3.0V
0
INPUT VOLTAGE [V]
140
6
5.5V
105℃
-10
-1
BU7462 family
Large Signal Voltage Gain
– Supply Voltage
60
85℃
Fig.38
160
SUPPLY VOLTAGE [V]
120
-5
120
(Vicm= VDD-1.2[V], VOUT= VDD/2)
LARGE SIGNAL VOLTAGE GAIN [dB]
LARGE SIGNAL VOLTAGE GAIN [dB]
BU7462 family
1
90
Input Offset Voltage – Ambient Temperature
(Vicm= VDD-1.2[V], VOUT= VDD/2)
0
0
Fig.37
160
-40℃
25℃
5
AMBIENT TEMPERATURE [°C]
Input Offset Voltage – Supply Voltage
80
60
COMMON MODE REJECTION RATIO [dB]
1
10
-15
-10.0
0
SLEW RATE H-L [V/μs]
5.5V
-2.5
-5.0
BU7462 family
15
PHASE [deg]
INPUT OFFSET VOLTAGE [mV]
7.5
BU7462 family
10.0
INPUT OFFSET VOLTAGE [mV]
BU7462 family
10.0
14/36
BU7462S F/FVM/NUX: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Reference data (BU7464 family)
BU7464 family
BU7464F
400
200
85
50
100
AMBIENT TEMPERATURE [℃]
105℃
85℃
600
BU7464SF
400
200
0
0
150
105
50
100
AMBIENT TEMPERATURE [ ℃]
Fig.47
Fig.48
Derating curve
Derating curve
BU7464 family
1000
3.0V
500
1.7V
250
0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
1
BU7464 family
105℃
4
85℃
25℃
3
-40℃
2
1
2
3
4
5
SUPPLY VOLTAG E [V]
25℃
-40℃
0
2
3
4
5
SUPPLY VOLTAGE [V]
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
4
3.0V
2
1.7V
BU7464 family
40
-40℃
30
25℃
20
105℃
85℃
10
0
-60
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
0
120
Fig.53
Fig.54
Output Voltage Low – Ambient Temperature
0.5
1
1. 5
2
2.5
OUTPUT VOLTAGE [V]
3
Fig.55
Output Source Current – Output Voltage
(RL=10[kΩ])
BU7464 family
120
(RL=10[kΩ])
5.5V
6
6
(RL=10[kΩ])
1.7V
2
Output Voltage High – Ambient Temperature
BU7464 family
Output Voltage Low – Supply Voltage
20
3.0V
-60
0
1
4
6
OUTPUT SOURCE CURRENT [mA]
3
5.5V
6
Fig.52
8
OUTPUT VOLTAGE LOW [ mV]
105℃
85℃
BU7464 family
8
(RL=10[kΩ])
BU7464 family
6
0
1
Fig.51
6
3
4
5
SUPPLY VOLTAGE [V]
5
Output Voltage High – Supply Voltage
9
2
Supply Current – Supply Voltage
Fig.50
12
-40℃
0
150
Supply Current – Ambient Temperature
(VDD=3.0[V])
BU7464 family
80
BU7464 family
60
15
3.0V
10
1.7V
5
0
-60
OUTPUT SINK CURRENT [mA]
-40℃
5.5V
60
OUTPUT SINK CURRENT [mA]
OUTPUT VOLTAGE LOW [mV]
25℃
250
0
-60
OUTPUT SOURCE CURRENT [mA]
500
Fig.49
6
OUTPUT VOLTAGE HIGH [V]
5.5V
750
750
OUTPUT VOLTAG E HIGH [V]
0
BU7464 family
1000
SUPPLY CURRENT [μA]
POWER DISSIPATION [ mW] .
POWER DISSIPATIO N [mW] .
600
0
SUPPLY CURRENT [μA]
BU7464 family
800
800
25℃
40
105℃
85℃
20
0
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
Fig.56
0.0
0.5
1.0
1.5
2.0
2.5
3.0
OUTPUT VOLTAGE [ V]
5.5V
30
20
3.0V
1.7V
10
0
-60
-30
0
30
60
90
AMBIENT TEMPERATURE[℃]
(VOUT=VDD-0.4[V])
(VDD=3[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7464F: -40[℃] ~ +85[℃]
15/36
120
Fig.58
Output Sink Current – Output Voltage
www.rohm.com
40
Fig.57
Output Source Current – Ambient Temperature
© 2010 ROHM Co., Ltd. All rights reserved.
50
Output Sink Current – Ambient Temperature
(VOUT=VSS+0.4[V])
BU7464SF: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Reference data (BU7464 family)
INPUT OFFSET VOLTAGE [ mV]
5.0
85℃
2.5
105℃
0.0
-2.5
-40℃
25℃
-5.0
-7.5
7.5
5.0
5.5V
2.5
0.0
-2.5
3.0V
-5.0
-7.5
2
3
4
5
INPUT VOLTAGE [V]
Fig.59
Input Offset Voltage – Supply Voltage
140
105℃
85℃
120
25℃
100
-40℃
80
-30
0
30
60
90
AMBI ENT TEMPERATURE [ ℃]
1
2
3
4
5
SUPPLY VOLTAGE [V]
6
1.7V
80
3.0V
60
40
20
0
-60
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
140
3.0V
5.5V
120
100
1.7V
80
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
BU7464 family
120
100
25℃
80
85℃
60
40
20
0
1
2
3
4
5
SUPPLY VOLTAGE [ V]
Fig.64
Common Mode Rejection Ratio
– Supply Voltage
BU7464 family
100
80
60
40
20
0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
Fig.65
120
BU7464 family
2
1.5
5.5V
1
3.0V
0.5
1.7V
0
-60
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
Fig.66
BU7464 family
100
120
Fig.67
Power Supply Rejection Ratio
– Ambient Temperature
BU7464 family
2.0
6
Fig.63
120
Common Mode Rejection Ratio
– Ambient Temperature
-40℃
105℃
Large Signal Voltage Gain
– Ambient Temperature
140
-60
120
3.0
(VDD=3[V])
BU7464 family
POWER SUPPLY REJECTI ON RATIO [dB]
POWER SUPPLY REJECTI ON RATIO [dB]
COMMON MODE REJECTI ON RATIO [dB]
100
2.5
(Vicm= VDD-1.2[V], VOUT= VDD/2)
Fig.62
5.5V
-10
Fig.61
-60
BU7464 family
25℃
105℃
Input Offset Voltage – Input Voltage
Large Signal Voltage Gain
– Supply Voltage
120
-40℃
-5
-1.0 -0.5 0.0 0.5 1.0 1.5 2.0
INPUT VOLTAGE [V]
120
60
60
85℃
0
Fig.60
160
LARGE SIGNAL VOLTAGE GAIN [dB]
LARGE SIG NAL VOLTAGE GAIN [dB]
160
5
Input Offset Voltage – Ambient Temperature
(Vicm= VDD-1.2[V], VOUT= VDD/2)
BU7464 family
10
-15
-60
6
COMMON MODE REJECTION RATIO [dB]
1
Slew Rate L-H – Ambient Temperature
200
Phase
80
1.6
150
5.5V
3.0V
1.2
GAIN [dB]
SLEW RATE H-L [V/μs]
1.7V
-10.0
-10. 0
BU7464 family
15
0.8
0.4
60
100
Gain
40
50
20
1.7V
0.0
0
-60
-30
0
30
60
90
AMBIENT TEMPERATURE [ ℃]
120
Fig.68
Slew Rate H-L – Ambient Temperature
0
1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 1.E+08
FREQUENCY [Hz]
Fig.69
Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7464F: -40[℃] ~ +85[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
PHASE [deg]
INPUT OFFSET VOLTAGE [mV]
7.5
BU7464 family
10.0
INPUT OFFSET VOLTAGE [mV]
BU7464 family
10. 0
16/36
BU7464SF: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Reference data (BU7465 family)
BU7465 family
BU7465 family
1000
POWER DISSIPATION [ mW] .
800
BU7465HFV
600
400
200
BU7465 family
300
250
800
SUPPLY CURRENT [μA]
POWER DISSIPATION [mW] .
1000
BU7465SHFV
600
400
200
200
105℃
85℃
150
100
25℃
50
-40℃
85 100
50
AMBI ENT TEMPERATURE [℃]
150
0
105
50
100
AMBIENT TEMPERATURE [ ℃]
Fig.70
200
5.5V
150
100
1.7V
50
BU7465 family
105℃
4
85℃
3
25℃
-40℃
2
1
1
2
3
4
5
SUPPLY VOLTAGE [ V]
Fig.73
3
4
5
SUPPLY VOLTAGE [V]
5.5V
5
0
-60
(RL=10[kΩ])
BU7465 family
50
3.0V
1.7V
40
25℃
-40℃
30
20
10
105℃
85℃
0
-30
0
30
60
90
AMBIENT TEMPERATURE [ ℃]
Fig.76
0
120
0.5
1
1.5
2
2. 5
OUTPUT VOLTAGE [V]
Fig.77
(RL=10[kΩ])
3
Fig.78
Output Voltage Low – Ambient Temperature
Output Source Current – Output Voltage
(RL=10[kΩ])
BU7465 family
120
Output Voltage High – Ambient Temperature
BU7465 family
10
6
Output Voltage Low – Supply Voltage
(VDD=3[V])
BU7465 family
80
BU7465 family
50
5.5V
15
3.0V
10
1.7V
5
0
-60
60
OUTPUT SINK CURRENT [mA]
-40℃
OUTPUT SINK CURRENT [mA]
OUTPUT SOURCE CURRENT [mA]
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
(RL=10[kΩ])
0
20
1.7V
2
-60
25℃
2
3.0V
Fig.75
15
OUTPUT VOLTAGE LOW [mV]
OUTPUT VOLTAGE LOW [ mV]
105℃
5
1
4
Fig.74
10
85℃
5.5V
6
0
6
Output Voltage High – Supply Voltage
BU7465 family
-40℃
BU7465 family
8
5
120
Supply Current – Ambient Temperature
6
Supply Current – Supply Voltage
0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
15
3
4
5
SUPPLY VOLTAGE [V]
Fig.72
6
OUTPUT VOLTAGE HIGH [V]
SUPPLY CURRENT [μA]
250
0
-60
2
Fig.71
BU7465 family
3.0V
1
150
Derating curve
Derating curve
300
0
OUTPUT VOLTAG E HIGH [V]
0
0
OUTPUT SOURCE CURRENT [mA]
0
25℃
40
85℃
20
105℃
0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
0.0
0.5
1.0
1.5
2.0
2.5
OUTPUT VOLTAGE [ V]
3.0
40
5.5V
30
20
3.0V
10
0
-60
1.7V
-30
0
30
60
90
120
AMBIENT TEMPERATURE[℃]
Fig.79
Fig.80
Output Source Current – Ambient Temperature
Output Sink Current – Output Voltage
Output Sink Current – Ambient Temperature
(VOUT=VDD-0.4[V])
(VDD=3[V])
(VOUT=VSS+0.4[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7465HFV: -40[℃] ~ +85[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
17/36
Fig.81
BU7465SHFV: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Reference data (BU7465 family)
BU7465 family
5.0
-40℃
25℃
0.0
-2.5
105℃
85℃
-5.0
-7.5
8
5.0
5.5V
2.5
0.0
-2.5
3.0V
1.7V
-5.0
-7.5
2
3
4
5
INPUT VO LTAGE [V]
-2
-6
120
-1.0 -0.5 0.0 0.5 1.0 1.5 2.0
INPUT VOLTAGE [V]
105℃
120
25℃
-40℃
80
Fig.84
(VDD=3[V])
BU7465 family
160
140
5.5V
120
100
3.0V
80
1.7V
60
2
3
4
5
SUPPLY VOLTAGE [V]
-60
6
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
Fig.85
100
1.7V
60
40
20
0
-60
-30
0
30
60
90
AMBIENT TEMPERATURE [ ℃]
120
120
100
80
60
40
0
-60
0
2
3
4
5
SUPPLY VOLTAGE [ V]
120
BU7465 family
120
Fig.91
Slew Rate H-L – Ambient Temperature
www.rohm.com
1.5
1.0
1.7V
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
Slew Rate L-H – Ambient Temperature
200
PHASE [deg]
60
100
40
Gain
50
0
1.E+00 1.E+0 1 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 1.E+08
FREQUENCY [Hz]
Fig.92
Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7465HFV: -40[℃] ~ +85[℃]
© 2010 ROHM Co., Ltd. All rights reserved.
5.5V
3.0V
150
0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
2.0
Fig.90
20
0.0
BU7465 family
-60
1.0
1.7V
6
0.0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
100
GAIN [dB]
3.0V
-60
20
0.5
20
80
0.5
40
2.5
Phase
5.5V
105℃
60
3.0
Fig.89
2.5
25℃
Common Mode Rejection Ratio
– Supply Voltage
Power Supply Rejection Ratio
– Ambient Temperature
BU7465 family
1.5
85℃
1
BU7465 family
Fig.88
2.0
-40℃
80
Fig.87
140
Common Mode Rejection Ratio
– Ambient Temperature
3.0
100
120
SLEW RATE L-H [V/μs]
POWER SUPPLY REJECTI ON RATIO [dB]
3.0V
120
80
120
Large Signal Voltage Gain
– Ambient Temperature
BU7465 family
5.5V
BU7465 family
140
Fig.86
Large Signal Voltage Gain
– Supply Voltage
140
3.0
(Vicm= VDD-1.2[V], VOUT= VDD/2)
60
1
2.5
Input Offset Voltage – Input Voltage
LARGE SIGNAL VOLTAGE GAIN [dB]
85℃
100
85℃
105℃
Input Offset Voltage – Ambient Temperature
BU7465 family
140
25℃
-4
Fig.83
(Vicm= VDD-1.2[V], VOUT= VDD/2)
160
-40℃
0
-10
-30
0
30
60
90
AMBI ENT TEMPERATURE [ ℃]
Fig.82
LARGE SIG NAL VOLTAGE GAIN [dB]
2
-8
-60
6
Input Offset Voltage – Supply Voltage
COMMON MODE REJECTI ON RATIO [dB]
4
COMMON MODE REJECTION RATIO [dB]
1
SLEW RATE H-L [V/μs]
6
-10.0
-10.0
BU7465 family
10
7.5
INPUT OFFSET VOLTAGE [ mV]
INPUT OFFSET VOLTAGE [mV]
7.5
2.5
BU7465 family
10.0
INPUT OFFSET VOLTAGE [mV]
10.0
18/36
BU7465SHFV: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Reference data (BU7441 family)
BU7441 family
BU7441G
400
200
0
85
50
BU7441SG
400
200
0
150
100
150
0
6
Fig.95
400
1.7V
5.5V
3.0V
BU7441 family
6
-40℃
4
85℃
25℃
105℃
2
30
60
90
120
AMBIENT TEMPERATURE [°C]
2
Fig.96
4
1.7V
2
6
-60
-30
0
Fig.97
105℃
85℃
3
25℃
-40℃
6
5.5V
4
1.7V
2
3.0V
0
2
4
6
-60
SUPPLY VOLTAGE [V]
-30
0
30
90
120
Output Voltage High – Ambient Temperature
(RL=10[kΩ])
BU7441 family
8
OUTPUT VOLTAGE LOW [mV]
9
60
Fig.98
(RL=10[kΩ])
12
30
AMBIENT TEMPERATURE [°C]
Output Voltage High – Supply Voltage
BU7441 family
0
3.0V
SUPPLY VOLTAGE [V]
Supply Current – Ambient Temperature
6
5.5V
4
0
0
60
90
OUTPUT SOURCE CURRENT [mA]
0
BU7441 family
6
0
0
4
Supply Current – Supply Voltage
600
-30
2
SUPPLY VOLTAGE [V]
Fig.94
OUTPUT VOLTAGE HIGH [V]
SUPPLY CURRENT [μA]
0
105
50
Derating curve
BU7441 family
-60
-40℃
Fig.93
0
BU7441 family
30
-40℃
23
25℃
15
85℃
105℃
8
0
120
0
AMBIENT TEMPERATURE [°C]
1
2
3
OUTPUT VOLTAGE [V]
Fig.99
Fig.100
Fig.101
Output Voltage Low – Supply Voltage
Output Voltage Low – Ambient Temperature
Output Source Current – Output Voltage
(RL=10[kΩ])
(RL=10[kΩ])
(VDD=3[V])
BU7441 family
5.5V
15
3.0V
10
1.7V
5
80
OUTPUT SINK CURRENT [mA]
20
0
BU7441 family
-40℃
25℃
60
40
85℃
105℃
20
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE [°C]
Fig.102
0
1
2
3
5.5V
20
3.0V
1.7V
-60
-30
Fig.103
(VDD=3[V])
19/36
30
60
90
120
Fig.104
(VOUT=VDD-0.4[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7441G: -40[℃] ~ +85[℃]
0
AMBIENT TEMPERATURE [°C]
OUTPUT VOLTAGE [V]
Output Sink Current – Output Voltage
www.rohm.com
40
0
Output Source Current – Ambient Temperature
© 2010 ROHM Co., Ltd. All rights reserved.
BU7441 family
60
OUTPUT SINK CURRENT [mA]
OUTPUT VOLTAGE LOW [mV]
40
Derating curve
800
OUTPUT SOURCE CURRENT [mA]
80
AMBIENT TEMPERATURE [°C]
AMBIENT TEMPERATURE [°C]
200
85℃
105℃
25℃
0
100
120
OUTPUT VOLTAGE HIGH [V]
0
600
BU7441 family
160
SUPPLY CURRENT [μA]
600
BU7441 family
800
POWER DISSIPATION [mW]
POWER DISSIPATION [mW]
800
Output Sink Current – Ambient Temperature
(VOUT=VSS+0.4[V])
BU7441SG: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Reference data (BU7441 family)
5.0
-40℃
2.5
25℃
0.0
85℃
-2.5
105℃
-5.0
-7.5
7.5
5.0
5.5V
2.5
0.0
3.0V
-2.5
1.7V
-5.0
-7.5
-10.0
-10.0
0
1
2
3
4
5
-30
0
-40℃
25℃
5
85℃
0
-5
-10
30
60
90
120
-1
0
1
2
3
INPUT VOLTAGE [V]
Fig.106
Fig.107
Input Offset Voltage – Ambient Temperature
Input Offset Voltage – Input Voltage
(Vicm= VDD-1.2[V], VOUT= VDD/2)
(Vicm= VDD-1.2[V], VOUT= VDD/2)
(VDD=3[V])
BU7441 family
160
140
-40℃
25℃
120
100
85℃
105℃
80
60
0
1
2
3
4
5
BU7441 family
160
140
5.5V
120
100
1.7V
3.0V
80
60
-60
6
-30
0
30
Fig.108
80
3.0V
1.7V
40
20
0
30
60
90
120
60
40
20
0
-60
-30
0
30
60
90
Fig.112
BU7441 family
1.0
100
0.8
2
3
GAIN [dB]
0.6
3.0V
0.4
5.5V
BU7441 family
Phase
0.0
90
120
AMBIENT TEMPERATURE [°C]
Fig.114
Slew Rate H-L – Ambient Temperature
www.rohm.com
0.6
1.7V
0.4
0.2
5.5V
3.0V
-30
0
30
60
90
120
200
50
0
1.E+00 1.E+02 1.E+04 1.E+06 1.E+08
FREQUENCY [Hz]
Fig.115
Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7441G: -40[℃] ~ +85[℃]
© 2010 ROHM Co., Ltd. All rights reserved.
0.8
Slew Rate L-H – Ambient Temperature
100
Gain
0
60
6
150
20
1.7V
5
AMBIENT TEMPERATURE [°C]
60
40
4
Fig.113
80
30
1
BU7441 family
-60
AMBIENT TEMPERATURE [°C]
Power Supply Rejection Ratio
– Ambient Temperature
0
0
0.0
120
Fig.111
-30
0
1.0
80
Common Mode Rejection Ratio
– Ambient Temperature
-60
20
Fig.110
100
AMBIENT TEMPERATURE [°C]
0.2
40
Common Mode Rejection Ratio
– Supply Voltage
BU7441 family
120
85℃
105℃
60
SUPPLY VOLTAGE [V]
SLEW RATE L-H [V/μs]
5.5V
100
POWER SUPPLY REJECTION RATIO [dB]
BU7441 family
0
120
80
Fig.109
120
-30
90
25℃
-40℃
100
Large Signal Voltage Gain
– Ambient Temperature
Large Signal Voltage Gain
– Supply Voltage
-60
60
BU7441 family
120
AMBIENT TEMPERATURE [°C]
SUPPLY VOLTAGE [V]
60
COMMON MODE REJECTION RATIO [dB]
Input Offset Voltage – Supply Voltage
LARGE SIGNAL VOLTAGE GAIN [dB]
LARGE SIGNAL VOLTAGE GAIN [dB]
105℃
10
AMBIENT TEMPERATURE [°C]
Fig.105
COMMON MODE REJECTION RATIO [dB]
BU7441 family
15
-15
-60
6
SUPPLY VOLTAGE [V]
SLEW RATE H-L [V/μs]
INPUT OFFSET VOLTAGE [mV]
7.5
BU7441 family
10.0
PHASE [deg]
INPUT OFFSET VOLTAGE [mV]
INPUT OFFSET VOLTAGE [mV]
BU7441 family
10.0
20/36
BU7441SG: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
●Reference data (BU7442 family)
BU7442 family
BU7442FVM
600
BU7442NUX
400
400
200
200
800
600
BU7442SFVM
600
BU7442SNUX
400
400
200
200
0
85 100
150
100
150
AMBIENT
TEMPERATURE[
AMBIENT TEMPERATURE [°C]
℃]
50
50
0
100105
150
50
100
150
AMBIENT
TEMPERATURE
AMBIENT TEMPERATURE[[°C]
℃]
600
400
5.5V
3.0V
200
Supply Current – Supply Voltage
BU7442 family
-40℃
4
85℃
25℃
105℃
2
0
30
60
90
120
AMBIENT TEMPERATURE [°C]
2
4
9
105℃
85℃
3
25℃
-40℃
6
5.5V
4
1.7V
2
2
4
6
3.0V
-60
SUPPLY VOLTAGE [V]
-30
0
30
Fig.122
60
90
3.0V
0
85℃
105℃
8
0
1
60
90
120
AMBIENT TEMPERATURE [°C]
-40℃
25℃
40
105℃
85℃
20
Fig.125
Output Source Current – Ambient Temperature
1
2
3
OUTPUT VOLTAGE [V]
Fig.126
Output Sink Current – Output Voltage
(VDD=3[V])
(VOUT=VDD-0.4[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7442F/FVM/NUX: -40[℃] ~ +85[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
BU7442 family
60
40
5.5V
20
3.0V
1.7V
0
0
21/36
3
Output Source Current – Output Voltage
BU7442 family
60
2
(VDD=3.0[V])
0
30
15
OUTPUT VOLTAGE [V]
OUTPUT SINK CURRENT [mA]
10
0
25℃
Fig.124
80
OUTPUT SINK CURRENT [mA]
5.5V
-30
23
0
(RL=10[kΩ])
20
120
-40℃
Fig.123
BU7442 family
90
BU7442 family
30
120
Output Voltage Low – Ambient Temperature
(RL=10[kΩ])
60
Output Voltage High – Ambient Temperature
AMBIENT TEMPERATURE [°C]
Output Voltage Low – Supply Voltage
30
(RL=10[kΩ])
0
-60
0
Fig.121
BU7442 family
8
0
1.7V
-30
AMBIENT TEMPERATURE [°C]
(RL=10[kΩ])
OUTPUT VOLTAGE LOW [mV]
12
5
-60
Fig.120
BU7442 family
15
1.7V
2
6
Output Voltage High – Supply Voltage
Supply Current – Ambient Temperature
0
3.0V
SUPPLY VOLTAGE [V]
Fig.119
6
5.5V
4
0
0
OUTPUT SOURCE CURRENT [mA]
-30
BU7442 family
6
0
-60
6
Fig.118
6
0
-40℃
2
4
SUPPLYVOLTAGE
VOLTAGE[V]
[V]
SUPPLY
Fig.117
BU7442 family
1.7V
0
Derating curve
OUTPUT VOLTAGE HIGH [V]
SUPPLY CURRENT [uA]
25℃
50
Fig.116
OUTPUT VOLTAGE LOW [mV]
100
0
0
Derating curve
800
85℃
105℃
OUTPUT VOLTAGE HIGH [V]
00
OUTPUT SOURCE CURRENT [mA]
200
0
00
BU7442 family
300
BU7442SF
POW ER DISSIPATION [mW ]
800
600
BU7442 family
800
1000
SUPPLY CURRENT [μA]
BU7442F
POWER DISSIPATION [mW]
POWER DISSIPATION [mW]
POWER DISSIPATION [mW]
800
1000
Technical Note
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE [°C]
Fig.127
Output Sink Current – Ambient Temperature
(VOUT=VSS+0.4[V])
BU7442S F/FVM/NUX: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
7.5
5.0
25℃
-40℃
2.5
0.0
-2.5
85℃
105℃
-5.0
-7.5
BU7442 family
10.0
7.5
5.0
5.5V
2.5
0.0
-2.5
3.0V
-5.0
0
-7.5
1
2
3
4
5
-30
0
-40℃
10
25℃
5
0
85℃
-5
105℃
-10
30
60
90
120
-1
0
AMBIENT TEMPERATURE [°C]
Fig.128
1
2
3
INPUT VOLTAGE [V]
Fig.129
Fig.130
Input Offset Voltage – Ambient Temperature
Input Offset Voltage – Input Voltage
(Vicm= VDD-1.2[V], VOUT= VDD/2)
(Vicm= VDD-1.2[V], VOUT= VDD/2)
(VDD=3[V])
BU7442 family
140
120
-40℃
105℃
100
85℃
80
25℃
60
0
1
2
3
4
5
BU7442 family
160
140
120
5.5V
100
80
3.0V
1.7V
60
6
-60
SUPPLY VOLTAGE [V]
-30
0
Fig.131
40
20
0
-60
-30
0
30
60
90
120
100
80
60
40
20
-60
-30
0
30
60
90
BU7442 family
0.8
80
GAIN [dB]
100
3.0V
0.4
5.5V
0.0
BU7442 family
Phase
90
120
AMBIENT TEMPERATURE [°C]
40
0.8
0.6
1.7V
0.4
0.2
5.5V
3.0V
1.E+00
-30
0
30
60
90
120
Slew Rate L-H – Ambient Temperature
200
100
Gain
50
0
1.E+02
1.E+04
1.E+06
1.E+08
FREQUENCY [Hz]
Fig.138
Slew Rate H-L – Ambient Temperature
Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7442F/FVM/NUX: -40[℃] ~ +85[℃]
www.rohm.com
6
AMBIENT TEMPERATURE [°C]
60
Fig.137
© 2010 ROHM Co., Ltd. All rights reserved.
5
150
0
60
4
Fig.136
20
1.7V
3
BU7442 family
-60
120
AMBIENT TEMPERATURE [°C]
1.0
30
2
0.0
0
Common Mode Rejection Ratio
– Ambient Temperature
0
1
1.0
Fig.135
-30
0
BU7442 family
Power Supply Rejection Ratio
– Ambient Temperature
-60
0
Common Mode Rejection Ratio
– Supply Voltage
Fig.134
0.2
20
Fig.133
120
AMBIENT TEMPERATURE [°C]
0.6
40
SUPPLY VOLTAGE [V]
SLEW RATE L-H [V/μs]
1.7V
POWER SUPPLY REJECTION RATIO [dB]
80
60
120
25℃
-40℃
60
Fig.132
5.5V
3.0V
90
105℃
80
Large Signal Voltage Gain
– Ambient Temperature
BU7442 family
100
60
85℃
100
AMBIENT TEMPERATURE [°C]
Large Signal Voltage Gain
– Supply Voltage
120
30
BU7442 family
120
PHASE [deg]
160
COMMON MODE REJECTION RATIO [dB]
Input Offset Voltage – Supply Voltage
LARGE SIGNAL VOLTAGE GAIN [dB]
LARGE SIGNAL VOLTAGE GAIN [dB]
BU7442 family
15
-15
-60
6
SUPPLY VOLTAGE [V]
COMMON MODE REJECTION RATIO [dB]
1.7V
-10.0
-10.0
SLEW RATE H-L [V/μs]
INPUT OFFSET VOLTAGE [mV]
BU7442 family
10.0
INPUT OFFSET VOLTAGE [mV]
INPUT OFFSET VOLTAGE [mV]
●Reference data (BU7442 family)
22/36
BU7442S F/FVM/NUX: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Reference data (BU7444 family)
800
BU7444F
600
400
200
BU7444 family
400
350
POWER DISSIPATION [ mW] .
POWER DISSIPATION [mW] .
BU7444 family
1000
800
SUPPLY CURRENT [μA]
BU7444 family
1000
BU7444SF
600
400
200
300
105℃
85℃
250
200
150
100
-40℃
25℃
50
0
85 100
50
AMBIENT TEMPERATURE [ ℃]
0
150
0
105
50
100
AMBIENT TEMPERATURE [ ℃]
Fig.139
OUTPUT VOLTAGE HIGH [V]
3.0V
200
150
1.7V
100
50
5.00
105℃
4.00
85℃
25℃
3.00
-40℃
2.00
1.00
0.00
0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
2
3
4
5
SUPPLY VOLTAGE [V]
Fig.142
(RL=10[kΩ])
BU7444 family
8
105℃
85℃
3
25℃
6
3.0V
4
1.7V
2
0
-60
6
5.5V
3.0V
1.7V
20
15
105℃
10
85℃
5
0
120
0.5
1
1.5
2
2.5
OUTPUT VOLTAGE [V]
60
90
120
AMBIENT TEMPERATURE [℃]
Fig.148
3
Fig.147
(RL=10[kΩ])
(VDD=3.0[V])
BU7444 family
80
25℃
60
-40℃
40
105℃
85℃
20
0
30
25
Output Source Current – Output Voltage
OUTPUT SINK CURRENT [mA]
OUTPUT SOURCE CURRENT [mA]
20
0
25℃
30
Output Voltage Low – Ambient Temperature
BU7444 family
-30
-40℃
Fig.146
(RL=10[kΩ])
0
-60
35
0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
Fig.145
Output Voltage Low – Supply Voltage
5
BU7444 family
40
-40℃
3
4
5
SUPPLY VOLTAGE [V]
120
Output Voltage High – Ambient Temperature
(RL=10[kΩ])
OUTPUT VOLTAGE LOW [mV]
OUTPUT VOLTAG E LO W [mV]
9
10
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
Fig.144
5.5V
15
1.7V
2
-60
OUTPUT SOURCE CURRENT [mA]
12
2
3.0V
Fig.143
BU7444 family
1
4
6
Output Voltage High – Supply Voltage
Supply Current – Ambient Temperature
0
5.5V
6
0
1
120
6
BU7444 family
8
0.0
0.5
1.0
1.5
2.0
2.5
OUTPUT VOLTAGE [ V]
3.0
Fig.149
BU7444 family
60
OUTPUT SINK CURRENT [mA]
SUPPLY CURRENT [ μA]
5.5V
6
3
4
5
SUPPLY VOLTAGE [ V]
Fig.141
BU7444 family
6.00
350
-60
2
Supply Current – Supply Voltage
Derating curve
BU7444 family
400
250
1
Fig.140
Derating curve
300
0
150
OUTPUT VOLTAG E HIGH [V]
0
50
40
5.5V
30
3.0V
20
1.7V
10
0
-60
-30
0
30
60
90
AMBIENT TEMPERATURE[ ℃]
120
Fig.150
Output Source Current – Ambient Temperature
Output Sink Current – Output Voltage
Output Sink Current – Ambient Temperature
(VOUT=VDD-0.4[V])
(VDD=3[V])
(VOUT=VSS+0.4[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7444F/FVM/NUX: -40[℃] ~ +85[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
23/36
BU7444S F/FVM/NUX: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Reference data (BU7444 family)
INPUT OFFSET VOLTAGE [ mV]
5.0
105℃
2.5
25℃
0.0
-2.5
-40℃
85℃
-5.0
-7.5
7.5
5.0
5.5V
2.5
0.0
-2.5
1.8V
-5.0
-7.5
2
3
4
5
INPUT VOLTAGE [V]
-60
6
-30
0
30
60
90
AMBI ENT TEMPERATURE [ ℃]
Fig.151
120
80
-40℃
60
40
20
2
3
4
5
SUPPLY VOLTAGE [V]
140
3.0V
80
-60
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
Fig.154
100
3.0V
1.7V
60
40
20
0
-30
0
30
60
90
AMBIENT TEMPERATURE [ ℃]
-40℃
40
20
0
80
60
40
20
0. 6
5.5V
3.0V
0. 4
0. 2
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
0. 0
120
-60
100
120
BU7444 family
Phase
Slew Rate L-H – Ambient Temperature
200
150
60
40
-30
0
30
60
90
AMBI ENT TEMPERATURE [℃]
Fig.159
Power Supply Rejection Ratio
– Ambient Temperature
GAIN [dB]
0.4
0. 8
1.7V
0
80
3.0V
6
BU7444 family
1. 0
Fig.158
5.5V
3
4
5
SUPPLY VOLTAGE [ V]
Common Mode Rejection Ratio
– Supply Voltage
100
-60
0.8
2
120
120
BU7444 family
85℃
60
1
BU7444 family
Fig.157
0.6
105℃
Fig.156
140
Common Mode Rejection Ratio
– Ambient Temperature
1.0
80
120
SLEW RATE L-H [V/μs]
5.5V
-60
25℃
100
Fig.155
BU7444 family
120
BU7444 family
120
Large Signal Voltage Gain
– Ambient Temperature
POWER SUPPLY REJECTI ON RATIO [dB]
COMMON MODE REJECTI ON RATI O [dB]
5.5V
1.7V
6
3.0
(VDD=3[V])
120
100
2.5
Input Offset Voltage – Input Voltage
BU7444 family
Large Signal Voltage Gain
– Supply Voltage
80
-10
-15
-1.0 -0.5 0.0 0.5 1.0 1.5 2.0
INPUT VOLTAGE [ V]
120
60
0
1
105℃
85℃
-5
Fig.153
160
LARGE SIGNAL VOLTAGE GAIN [dB]
LARGE SIG NAL VOLTAGE GAIN [dB]
105℃
85℃
0
(Vicm= VDD-1.2[V], VOUT= VDD/2)
BU7444 family
160
100
25℃
Input Offset Voltage – Ambient Temperature
(Vicm= VDD-1.2[V], VOUT= VDD/2)
25℃
-40℃
5
Fig.152
Input Offset Voltage – Supply Voltage
140
10
COMMON MODE REJECTION RATIO [dB]
1
SLEW RATE H-L [V/μs]
3.0V
-10.0
-10. 0
BU7444 family
15
100
Gain
PHASE [deg]
INPUT OFFSET VOLTAGE [mV]
7.5
BU7444 family
10.0
INPUT OFFSET VOLTAGE [mV]
BU7444 family
10. 0
1.7V
50
20
0.2
0
0.0
-60
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
Fig.160
Slew Rate H-L – Ambient Temperature
0
1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 1.E+08
FREQUENCY [Hz]
Fig.161
Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7444F/FVM/NUX: -40[℃] ~ +85[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
24/36
BU7444S F/FVM/NUX: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Reference data (BU7445 family)
BU7445 family
BU7445 family
1000
POWER DISSIPATION [ mW] .
800
BU7445HFV
600
400
200
800
BU7445SHFV
600
BU7445 family
100
SUPPLY CURRENT [μA]
POWER DISSIPATION [mW] .
1000
400
200
75
85℃
105℃
50
25
-40℃
25℃
85
50
100
AMBIENT TEMPERATURE [ ℃]
0
Fig.162
Fig.163
Derating curve
BU7445 family
50
5.5V
3.0V
25
1.7V
1
BU7445 family
85℃
25℃
3.00
-40℃
2.00
1.00
1
120
2
3
4
5
SUPPLY VOLTAGE [V]
Fig.165
BU7445 family
10
85℃
-40℃
105℃
5
3
4
5
SUPPLY VOLTAGE [V]
3.0V
1.7V
2
-60
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
Fig.167
(RL=10[kΩ])
(RL=10[kΩ])
BU7445 family
5.5V
1.7V
BU7445 family
50
10
3.0V
5
0
-60
40
-40℃
20
10
105℃
85℃
0
120
0.5
1
2. 5
3
Output Source Current – Output Voltage
(RL=10[kΩ])
(VDD=3.0[V])
BU7445 family
80
2
Fig.170
Output Voltage Low – Ambient Temperature
(RL=10[kΩ])
1.5
OUTPUT VOLTAGE [V]
Fig.169
30
25℃
30
0
-30
0
30
60
90
AMBIENT TEMPERATURE [ ℃]
Fig.168
BU7245 family
120
Output Voltage High – Ambient Temperature
6
Output Voltage Low – Supply Voltage
BU7445 family
50
25
20
5.5V
15
3.0V
10
1.7V
5
60
OUTPUT SINK CURRENT [mA]
-40℃
OUTPUT SINK CURRENT [mA]
OUTPUT SOURCE CURRENT [mA]
4
Fig.166
0
2
5.5V
6
6
25℃
1
BU7445 family
Output Voltage High – Supply Voltage
15
OUTPUT VOLTAGE LOW [mV]
15
6
0
0.00
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
3
4
5
SUPPLY VOLTAGE [ V]
8
105℃
4.00
2
Supply Current – Supply Voltage
5.00
Supply Current – Ambient Temperature
OUTPUT VOLTAGE LOW [ mV]
150
Fig.164
6.00
OUTPUT VOLTAGE HIGH [V]
75
0
-60
105
50
100
AMBIENT TEMPERATURE [ ℃]
Derating curve
100
SUPPLY CURRENT [μA]
150
0
OUTPUT VOLTAG E HIGH [V]
0
0
OUTPUT SOURCE CURRENT [mA]
0
25℃
40
85℃
105℃
20
5.5V
40
30
20
3.0V
10
1.7V
0
-60
0
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
Fig.171
Output Source Current – Ambient Temperature
(VOUT=VDD-0.4[V])
0
0.0
0.5
1.0
1.5
2.0
2.5
www.rohm.com
-60
Fig.172
(VDD=3[V])
25/36
-30
0
30
60
90
120
AMBIENT TEMPERATURE[ ℃]
Fig.173
Output Sink Current – Output Voltage
(*)The above data is ability value of sample, it is not guaranteed. BU7445HFV: -40[℃] ~ +85[℃]
© 2010 ROHM Co., Ltd. All rights reserved.
3.0
OUTPUT VOLTAGE [ V]
Output Sink Current – Ambient Temperature
(VOUT=VSS+0.4[V])
BU7445S HFV: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Reference data (BU7445 family)
INPUT OFFSET VOLTAGE [ mV]
5.0
-40℃
25℃
85℃
0.0
-2.5
105℃
-5.0
-7.5
7.5
5.0
5.5V
2.5
0.0
1.7V
-2.5
-5.0
-7.5
2
3
4
5
INPUT VOLTAGE [V]
-60
6
-30
0
30
60
90
AMBI ENT TEMPERATURE [ ℃]
Fig.174
LARGE SIGNAL VOLTAGE GAIN [dB]
LARGE SIG NAL VOLTAGE GAIN [dB]
105℃
85℃
120
100
25℃
80
-40℃
60
3
4
5
SUPPLY VOLTAGE [V]
140
5.5V
3.0V
100
80
1.7V
-60
6
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
Fig.177
1.7V
100
80
60
40
20
0
-60
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
100
80
-40℃
120
100
80
60
40
20
0
-60
120
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
60
2
Fig.181
100
GAIN [dB]
0.4
5.5V
BU7445 family
0. 6
0. 4
5.5V
3.0V
0. 2
1.7V
0. 0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
Slew Rate L-H – Ambient Temperature
BU7445 family
Phase
200
150
60
40
6
Fig.182
80
0.6
3
4
5
SUPPLY VOLTAGE [ V]
0. 8
-60
Power Supply Rejection Ratio
– Ambient Temperature
BU7445 family
25℃
Common Mode Rejection Ratio
– Supply Voltage
BU7445 family
Fig.180
3.0V
105℃
85℃
Fig.179
140
Common Mode Rejection Ratio
– Ambient Temperature
0.8
120
1
COMMON MODE REJECTION RATIO [dB]
POWER SUPPLY REJECTI ON RATIO [dB]
COMMON MO DE REJECTI ON RATI O [dB]
3.0V
140
Large Signal Voltage Gain
– Ambient Temperature
BU7445 family
140
120
BU7445 family
160
Fig.178
Large Signal Voltage Gain
– Supply Voltage
3.0
(VDD=3[V])
BU7445 family
120
2.5
Input Offset Voltage – Input Voltage
60
5.5V
-40℃
-10
Fig.176
160
140
105℃
85℃
-5
(Vicm= VDD-1.2[V], VOUT= VDD/2)
BU7445 family
120
25℃
0
Input Offset Voltage – Ambient Temperature
(Vicm= VDD-1.2[V], VOUT= VDD/2)
160
2
5
Fig.175
Input Offset Voltage – Supply Voltage
1
10
-15
-1.0 -0.5 0.0 0.5 1.0 1.5 2.0
INPUT VOLTAGE [V]
120
COMMON MODE REJECTION RATIO [dB]
1
SLEW RATE H-L [V/μs]
3.0V
-10.0
-10. 0
BU7445 family
15
100
Gain
0.2
PHASE [deg]
INPUT OFFSET VOLTAG E [mV]
7.5
2.5
BU7445 family
10.0
INPUT OFFSET VOLTAGE [ mV]
BU7445 family
10. 0
50
20
1.7V
0.0
-60
-30
0
30
60
90
AMBI ENT TEMPERATURE [℃]
120
Fig.183
Slew Rate H-L – Ambient Temperature
0
0
1.E+00 1 .E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 1.E+08
FREQUENCY [Hz]
Fig.184
Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7445HFV: -40[℃] ~ +85[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
26/36
BU7445S HFV: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Test circuit 1 NULL method
VDD, VSS, EK, Vicm Unit:[V]
Parameter
Input Offset Voltage
VF
S1
S2
S3
VDD
VSS
EK
Vicm
Calculation
VF1
ON
ON
OFF
3
0
-1.5
1.8
1
ON
ON
ON
3
0
0.9
2
ON
ON
OFF
3
0
-1.5
ON
ON
OFF
0
-0.9
VF2
Large Signal Voltage Gain
VF3
VF4
Common-mode Rejection Ratio
(Input Common-mode Voltage Range)
VF5
VF6
Power Supply Rejection Ratio
VF7
－ Calculation－
1. Input Offset Voltage (Vio)
Vio =
|VF1|
1 +Rf/Rs
2. Large Signal Voltage Gain(Av)
5.5
-2.5
0
1.8
0
3
4
[V]
2 × (1 + Rf/Rs)
Av = 20Log
1.7
-0.5
[dB]
|VF2-VF3|
3. Common-mode Rejection Ratio (CMRR)
CMRR= 20Log
1.8 × (1+Rf/Rs)
[dB]
|VF4 - VF5|
4. Power Supply Rejection Ratio (PSRR)
PSRR = 20Log
3.8 × (1 + Rf/Rs)
[dB]
|VF6 - VF7|
0.1[µF]
Rf=50[kΩ]
SW1
500[kΩ]
VDD
15[V]
EK
RS=50[Ω]
RS=50[Ω]
Vo
Ri=1[MΩ]
0.015[µF]
0.015[µF]
0.01[µF]
500[kΩ]
DUT
NULL
SW3
Ri=1[MΩ]
1000[pF]
VF
RL
Vicm
50[kΩ]
SW2
VSS
VRL
-15[V]
Fig.185 Test circuit 1 (one channel only)
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
27/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Test circuit 2 switch condition
SW
1
SW
2
SW
3
SW
4
SW
5
SW
6
SW
7
SW
8
SW
9
SW
10
SW
11
SW
12
Supply Current
OFF
OFF
ON
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Maximum Output Voltage
RL=10 [kΩ]
OFF
ON
OFF
OFF
ON
OFF
OFF
ON
OFF
OFF
ON
OFF
Output Current
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
Slew Rate
OFF
OFF
ON
OFF
OFF
OFF
ON
OFF
ON
OFF
OFF
ON
Maximum Frequency
ON
OFF
OFF
ON
ON
OFF
OFF
OFF
ON
OFF
OFF
ON
SW No.
SW3
SW4
R2 100[kΩ]
●
●
VDD=3[V]
－
SW1
＋
SW2
SW5
SW6
SW8
SW7
SW9
SW10
SW11
SW12
R1
1[kΩ]
GND
VIN-
RL
VIN+
CL
Vo
Fig.186 Test circuit 2
VIN
VOUT
[V]
[V]
1.8[V]
1.8[V]
SR = ΔV / Δ t
ΔV
1.8[V P-P]
Δt
0[V]
t
0[V]
Input waveform
t
Output waveform
Fig.187 Slew rate input output wave
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
28/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Test circuit 3 Channel separation
R2=100[kΩ]
R2=100[kΩ]
VDD
R1=1[kΩ]
V
VIN
R1//R2
VSS
VDD
R1=1[kΩ]
～
VOUT1
=1[Vrms]
R1//R2
CS=20Log
Fig.188 Test circuit 3
V VOUT2
～
VSS
100×VOUT1
VOUT2
●Schematic diagram
VDD
Vbias
IN+
class
AB control
IN‐
VSS
OUT
Vbias
Fig.189 Schematic diagram
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
29/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Examples of circuit
○Voltage follower
Voltage gain is 0 [dB].
This circuit controls output voltage (Vout) equal input
voltage (Vin), and keeps Vout with stable because of high
input impedance and low output impedance.
Vout is shown next formula.
VDD
Vout
Vout=Vin
Vin
VSS
Fig.190 Voltage follower
○Inverting amplifier
R2
For inverting amplifier, Vin is amplified by voltage gain
decided R1 and R2, and phase reversed voltage is
outputted.
Vout is shown next formula.
VDD
R1
Vin
Vout
Vout=-(R2/R1)・Vin
Input impedance is R1.
R1//R2
VSS
Fig.191 Inverting amplifier
○Non-inverting amplifier
R1
R2
VDD
For non-inverting amplifier, Vin is amplified by voltage
gain decided R1 and R2, and phase is same with Vin.
Vout is shown next formula.
Vout
Vin
Vout=(1+R2/R1)・Vin
This circuit realizes high input impedance because Input
impedance is operational amplifier’s input Impedance.
VSS
Fig.192 Non-inverting amplifier
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
30/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Examples of circuit
○Adder circuit
R3
VDD
Vin1
Vin2
Adder circuit output the voltage that added up Input
voltage. A phase of the output voltage turns orver,
because non-inverting circuit is used.
Vout is shown next formula.
R1
Vout
R2
Vout = -R3(Vin1/R1+Vin2/R2)
When three input voltage is as above, it connects
with input through resistance like R1 and R2.
VSS
Fig.193 Adder circuit
○Differential amplifier
R2
VDD
R1
Vin1
Vin2
Vout
R3
Differential amplifier output the voltage that
amplified a difference of input voltage.
In the case of R1=R3=Ra, R2=R4=Rb
Vout is shown next formula.
Vout = -Rb/Ra(Vin1-Vin2)
R4
VSS
Fig.194 Differential amplifier
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
31/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Description of electrical characteristics
Described here are the terms of electric characteristics used in this technical note. Items and symbols used are also shown.
Note that item name and symbol and their meaning may differ from those on another manufacture’s document or general
document.
1. Absolute maximum ratings
Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute
maximum rating or use out of absolute maximum rated temperature environment may cause deterioration of characteristics.
1.1 Power supply voltage (VDD/VSS)
Indicates the maximum voltage that can be applied between the positive power supply terminal and negative power
supply terminal without deterioration or destruction of characteristics of internal circuit.
1.2 Differential input voltage (Vid)
Indicates the maximum voltage that can be applied between non-inverting terminal and inverting terminal without
deterioration and destruction of characteristics of IC.
1.3 Input common-mode voltage range (Vicm)
Indicates the maximum voltage that can be applied to non-inverting terminal and inverting terminal without
deterioration or destruction of characteristics. Input common-mode voltage range of the maximum ratings not assures
normal operation of IC. When normal Operation of IC is desired, the input common-mode voltage of characteristics
item must be followed.
1.4 Power dissipation (Pd)
Indicates the power that can be consumed by specified mounted board at the ambient temperature 25℃(normal temperature).
As for package product, Pd is determined by the temperature that can be permitted by IC chip in the package
(maximum junction temperature) and thermal resistance of the package.
2.Electrical characteristics item
2.1 Input offset voltage (Vio)
Indicates the voltage difference between non-inverting terminal and inverting terminal. It can be translated into the
input voltage difference required for setting the output voltage at 0 [V].
2.2 Input offset current (Iio)
Indicates the difference of input bias current between non-inverting terminal and inverting terminal.
2.3 Input bias current (Ib)
Indicates the current that flows into or out of the input terminal. It is defined by the average of input bias current at
non-inverting terminal and input bias current at inverting terminal.
2.4 Circuit current (ICC)
Indicates the IC current that flows under specified conditions and no-load steady status.
2.5 High level output voltage / Low level output voltage (VOH/VOL)
Indicates the voltage range that can be output by the IC under specified load condition. It is typically divided into
high-level output voltage and low-level output voltage. High-level output voltage indicates the upper limit of output
voltage. Low-level output voltage indicates the lower limit.
2.6 Large signal voltage gain (AV)
Indicates the amplifying rate (gain) of output voltage against the voltage difference between non-inverting terminal
and inverting terminal. It is normally the amplifying rate (gain) with reference to DC voltage.
Av = (Output voltage fluctuation) / (Input offset fluctuation)
2.7 Input common-mode voltage range (Vicm)
Indicates the input voltage range where IC operates normally.
2.8 Common-mode rejection ratio (CMRR)
Indicates the ratio of fluctuation of input offset voltage when in-phase input voltage is changed. It is normally the
fluctuation of DC.
CMRR = (Change of Input common-mode voltage)/(Input offset fluctuation)
2.9 Power supply rejection ratio (PSRR)
Indicates the ratio of fluctuation of input offset voltage when supply voltage is changed. It is normally the fluctuation of DC.
PSRR= (Change of power supply voltage)/(Input offset fluctuation)
2.10 Channel separation (CS)
Indicates the fluctuation of input offset voltage or that of output voltage with reference to the change of output voltage
of driven channel.
2.11 Slew rate (SR)
Indicates the time fluctuation ratio of voltage output when step input signal is applied.
2.12 Unity gain frequency (ft)
Indicates a frequency where the voltage gain of Op-Amp is 1.
2.13 Total harmonic distortion + Noise (THD+N)
Indicates the fluctuation of input offset voltage or that of output voltage with reference to the change of output voltage
of driven channel.
2.14 Input referred noise voltage (Vn)
Indicates a noise voltage generated inside the operational amplifier equivalent by ideal voltage source connected in
series with input terminal.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
32/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Derating curve
Power dissipation (total loss) indicates the power that can be consumed by IC at Ta=25℃(normal temperature). IC is heated
when it consumed power, and the temperature of IC ship becomes higher than ambient temperature. The temperature that
can be accepted by IC chip depends on circuit configuration, manufacturing process, and consumable power is limited.
Power dissipation is determined by the temperature allowed in IC chip (maximum junction temperature) and thermal
resistance of package (heat dissipation capability).The maximum junction temperature is typically equal to the maximum
value in the storage package (heat dissipation capability).The maximum junction temperature is typically equal to the
maximum value in the storage temperature range. Heat generated by consumed power of IC radiates from the mold resin or
lead frame of the package. The parameter which indicates this heat dissipation capability (hardness of heat release) is called
thermal resistance, represented by the symbol θj-a[℃/W]. The temperature of IC inside the package can be estimated by
this thermal resistance. Fig.195 (a) shows the model of thermal resistance of the package. Thermal resistance θja, ambient
temperature Ta, junction temperature Tj, and power dissipation Pd can be calculated by the equation below:
θja = (Tj-Ta) / Pd
[℃/W]
・・・・・ (Ⅰ)
Derating curve in Fig.195(b) indicates power that can be consumed by IC with reference to ambient temperature. Power that
can be consumed by IC begins to attenuate at certain ambient temperature. This gradient iis determined by thermal
resistance θja. Thermal resistance θja depends on chip size, power consumption, package, ambient temperature, package
condition, wind velocity, etc even when the same of package is used. Thermal reduction curve indicates a reference value
measured at a specified condition. Fig196 (c)-(h) show a derating curve for an example Ground Sense Low Voltage
Operation CMOS Operational Amplifiers series.
[W]
Pd(max)
θja = ( Tj ー Ta ) / Pd [℃/W]
P2
θja2 <θja1
Ambient temperature Ta [℃]
θja2
P1
Tj(max)
θja1
0
Chip surface temperature Tj [℃]
Power dissipation P [W]
50
25
75
100
125
Ambient temperature Ta [℃]
(b) Derating curve
(a) Thermal resistance
Fig.195 Thermal resistance and derating
BU7461G(*26)
BU7441G(*26)
POWER DISSIPATION [mW]
800
535[mW]
600
BU7465HFV(*30)
BU7445HFV(*30)
400
200
0
0
600
BU7465SHFV(*30)
BU7455SHFV(*30)
400
200
50
100
AMBIENT TEMPERATURE[℃]
800
600
50
100
AMBIENT TEMPERATURE[℃ ]
0
5.4
(*27)
6.2
620[mW]
BU7462SF(*27)
BU7442SF(*27)
0
480[mW]
BU7462SFVM(*28)
BU7442SFVM(*26)
412[mW]
BU7462SNUX(*29)
BU7442SNUX(*29)
105
50
100
AMBIENT TEMPERATURE[℃]
600
400
200
0
(*29)
4.8
4.12
85 100
50
AM BIENT TEMPERATURE[℃ ]
150
(e) BU7464F BU7444F
800
4 88 [ mW ]
400
200
0
150
BU7461SG(*31)
BU7441SG(*31)
600
0
(g)BU7462S F/FVM/NUX BU7442S F/FVM/NUX
(*28)
BU7464F(*31)
BU7444F(*31)
1000
200
150
(f) BU7461SG BU7441SG
BU7465SHFV BU7445SHFV
(*26)
4 88 [ mW ]
150
400
105
0
800
0
85
0
POWER DISSIPATION [mW]
800
0
BU7462NUX(*29)
BU7442NUX(*29)
200
1000
600
BU7462FVM(*28)
BU7442FVM(*28)
(d) BU7462F/FVM/NUX BU7442F/FVM/NUX
BU7461SG(*26)
BU7441SG(*26)
5 3 5 [m W ]
480[mW]
1000
400
150
1000
5 4 0 [m W ]
BU7462F(*27)
BU7442F(*27)
412[mW]
0
85
50
100
AMBIENT TEMPERATURE[℃ ]
(c) BU7461G BU7441G
BU7465HFV BU7445HFV
POW ER DISSIPATION [mW ]
800
620[mW]
POW ER DISSIPATION [mW ]
POW ER DISSIPATION [mW ]
540[mW]
POW ER DISSIPATION [mW ]
1000
1000
105
50
100
AMBIENT TEMPERATURE[℃ ]
150
(h) BU7464SF BU7444SF
(*30)
(*31)
Unit
5.35
4.88
[mW/℃]
When using the unit above Ta=25[℃], subtract the value above per degree[℃]. Permissible dissipation is the value.
When FR4 glass epoxy board 70[mm]×70[mm]×1.6[mm] (cooper foil area below 3[％]) is mounted.
Fig.196 Thermal resistance and derating
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
33/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Cautions on use
1) Absolute maximum ratings
Absolute maximum ratings are the values which indicate the limits, within which the given voltage range can be safely
charged to the terminal. However, it does not guarantee the circuit operation.
2) Applied voltage to the input terminal
For normal circuit operation of voltage comparator, please input voltage for its input terminal within input common mode
voltage VDD + 0.3[V]. Then, regardless of power supply voltage, VSS-0.3[V] can be applied to input terminals without
deterioration or destruction of its characteristics.
3) Operating power supply (split power supply/single power supply)
The voltage comparator operates if a given level of voltage is applied between VDD and VSS. Therefore, the operational
amplifier can be operated under single power supply or split power supply.
4) Power dissipation (pd)
If the IC is used under excessive power dissipation. An increase in the chip temperature will cause deterioration of the
radical characteristics of IC. For example, reduction of current capability. Take consideration of the effective power
dissipation and thermal design with a sufficient margin. Pd is reference to the provided power dissipation curve.
5) Short circuits between pins and incorrect mounting
Short circuits between pins and incorrect mounting when mounting the IC on a printed circuits board, take notice of the
direction and positioning of the IC. If IC is mounted erroneously, It may be damaged. Also, when a foreign object is
inserted between output, between output and VDD terminal and VSS terminal which causes short circuit, the IC may be
damaged.
6) Using under strong electromagnetic field
Be careful when using the IC under strong electromagnetic field because it may malfunction.
7) Usage of IC
When stress is applied to the IC through warp of the printed circuit board, The characteristics may fluctuate due to the
piezo effect. Be careful of the warp of the printed circuit board.
8) Testing IC on the set board
When testing IC on the set board, in cases where the capacitor is connected to the low impedance, make sure to
discharge per fabrication because there is a possibility that IC may be damaged by stress. When removing IC from the set
board, it is essential to cut supply voltage. As a countermeasure against the static electricity, observe proper grounding
during fabrication process and take due care when carrying and storage it.
9) The IC destruction caused by capacitive load
The transistors in circuits may be damaged when VDD terminal and VSS terminal is shorted with the charged output
terminal capacitor.When IC is used as a operational amplifier or as an application circuit, where oscillation is not activated
by an output capacitor, the output capacitor must be kept below 0.1[μF] in order to prevent the damage mentioned above.
10) Latch up
Be careful of input voltage that exceed the VDD and VSS. When CMOS device have sometimes occur latch up operation.
And protect the IC from abnormaly noise
11) Decupling capacitor
Insert the decupling capacitance between VDD and VSS, for stable operation of operational amplifier.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
34/36
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
●Ordering part number
B
U
7
Part No.
4
6
Part No.
・7461 7461S
・7441 7441S
・7462 7462S
・7442 7442S
2
S
F
V
M
-
Package
G
: SSOP5
F
: SOP8, SOP14
FVM : MSOP8
NUX : VSON008X2030
HFV : HVSOF5
・7464 7464S
・7444 7444S
・7465 7465S
・7445 7445S
T
R
Packaging and forming specification
E2: Embossed tape and reel
(SOP8/SOP14)
TR: Embossed tape and reel
(SSOP5/MSOP8/VSON008X2030/HVSOF5)
SOP8
<Tape and Reel information>
7
5
6
+6°
4° −4°
6.2±0.3
4.4±0.2
0.3MIN
8
0.9±0.15
5.0±0.2
(MAX 5.35 include BURR)
1 2
3
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
E2
The direction is the 1pin of product is at the upper left when you hold
( reel on the left hand and you pull out the tape on the right hand
)
4
0.595
1.5±0.1
+0.1
0.17 -0.05
S
S
0.11
0.1
1.27
Direction of feed
1pin
0.42±0.1
Reel
(Unit : mm)
∗ Order quantity needs to be multiple of the minimum quantity.
SOP14
<Tape and Reel information>
8.7 ± 0.2
(MAX 9.05 include BURR)
8
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
0.3MIN
4.4±0.2
6.2±0.3
14
1
E2
The direction is the 1pin of product is at the upper left when you hold
( reel on the left hand and you pull out the tape on the right hand
)
7
1.5±0.1
0.15 ± 0.1
0.11
1.27
0.4 ± 0.1
0.1
Direction of feed
1pin
Reel
(Unit : mm)
∗ Order quantity needs to be multiple of the minimum quantity.
SSOP5
5
4
1
2
0.2Min.
+0.2
1.6 −0.1
2.8±0.2
<Tape and Reel information>
+6°
4° −4°
2.9±0.2
3
Tape
Embossed carrier tape
Quantity
3000pcs
Direction
of feed
TR
The direction is the 1pin of product is at the upper right when you hold
( reel on the left hand and you pull out the tape on the right hand
1pin
+0.05
0.13 −0.03
1.25Max.
)
0.05±0.05
1.1±0.05
S
+0.05
0.42 −0.04
0.95
0.1
S
Direction of feed
Reel
(Unit : mm)
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
35/36
∗ Order quantity needs to be multiple of the minimum quantity.
2010.12 - Rev.A
BU7461/BU7461S family, BU7441/BU7441S family, BU7462/BU7462S family, BU7442/BU7442S family
BU7464/BU7464S family, BU7444/BU7444S family, BU7465/BU7465S family, BU7445/BU7445S family
Technical Note
MSOP8
<Tape and Reel information>
2.8±0.1
4.0±0.2
8 7 6 5
0.6±0.2
+6°
4° −4°
0.29±0.15
2.9±0.1
(MAX 3.25 include BURR)
Tape
Embossed carrier tape
Quantity
3000pcs
Direction
of feed
TR
The direction is the 1pin of product is at the upper right when you hold
( reel on the left hand and you pull out the tape on the right hand
)
1 2 3 4
1PIN MARK
1pin
+0.05
0.145 −0.03
0.475
0.08±0.05
0.75±0.05
0.9MAX
S
+0.05
0.22 −0.04
0.08 S
Direction of feed
0.65
Reel
(Unit : mm)
∗ Order quantity needs to be multiple of the minimum quantity.
HVSOF5
<Tape and Reel information>
(0.05)
4
4
(0.91)
5
0.2MAX
(0.3)
1.0±0.05
5
(0.41)
1.6±0.05
(0.8)
Tape
Embossed carrier tape
Quantity
3000pcs
Direction
of feed
TR
The direction is the 1pin of product is at the upper right when you hold
( reel on the left hand and you pull out the tape on the right hand
)
3 2 1
1 2 3
1pin
0.13±0.05
S
+0.03
0.02 −0.02
0.6MAX
1.2±0.05
(MAX 1.28 include BURR)
1.6±0.05
0.1
S
0.5
0.22±0.05
0.08
Direction of feed
M
Reel
(Unit : mm)
∗ Order quantity needs to be multiple of the minimum quantity.
VSON008X2030
<Tape and Reel information>
3.0±0.1
2.0±0.1
0.6MAX
1PIN MARK
0.25
TR
The direction is the 1pin of product is at the upper right when you hold
( reel on the left hand and you pull out the tape on the right hand
)
(0.12)
+0.03
0.02 −0.02
1.5±0.1
4000pcs
0.5
1
4
8
5
1.4±0.1
0.3±0.1
C0.25
Embossed carrier tape
Quantity
Direction
of feed
S
0.08 S
Tape
1pin
+0.05
0.25 −0.04
Reel
(Unit : mm)
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
36/36
Direction of feed
∗ Order quantity needs to be multiple of the minimum quantity.
2010.12 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A