BZG03C15 Series 600 Watt Peak Power Zener Surge Rated Voltage Regulators The SMA series is supplied in ON Semiconductor’s exclusive, cost-effective, highly reliable SURMETIC package and is ideally suited for use in communication systems, automotive, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications. This new line of 1.5 watt Zener diodes offers the following advantages: Specification Features: • • • • • • • Standard Zener Breakdown Voltage − 15 V to 150 V Peak Power 600 Watts @ 100 µs ESD Rating of Class 3 (> 16 KV) per Human Body Model Response Time is Typically < 1.0 ns Flat Handling Surface for Accurate Placement Package Design for Top Slide or Bottom Circuit Board Mounting Low Profile Package http://onsemi.com PLASTIC SURFACE MOUNT ZENER VOLTAGE REGULATORS 600 WATTS PEAK POWER CATHODE Mechanical Characteristics: CASE: Void-free, transfer-molded plastic FINISH: All external surfaces are corrosion resistant and leads are ANODE SMA CASE 403D PLASTIC readily solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 Seconds POLARITY: Cathode indicated by molded polarity notch or polarity MARKING DIAGRAM band MOUNTING POSITION: Any xx LLYWW MAXIMUM RATINGS Please See the Table on the Following Page xx LL Y WW = Specific Device Code = (See Table on Page 2) = Assembly Location = Year = Work Week ORDERING INFORMATION Device * Package Shipping† BZG03C15 SMA 5000/Tape & Reel BZG03C150 SMA 5000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Semiconductor Components Industries, LLC, 2004 January, 2004 − Rev. 3 1 Publication Order Number: BZG03C15/D BZG03C15 Series MAXIMUM RATINGS Rating Symbol Value Unit PZSM 600 W Peak Power Dissipation (Note 1) @ TL = 25°C, tP = 100 s DC Power Dissipation @ TL = 75°C Measured Zero Lead Length (Note 2) Derate Above 75°C Thermal Resistance from Junction to Lead PD 1.5 W RJL 20 50 mW/°C °C/W Forward Surge Current (Note 3) @ TA = 25°C IFSM 40 A TJ, Tstg −65 to +150 °C Operating and Storage Temperature Range 1. 100 s, non−repetitive square pulse 2. 1″ square copper pad, FR−4 board 3. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum SYMBOLS DEFINITIONS I Symbol IF IPP Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP VRWM VC VBR VRWM V IR VF IT IR Working Peak Reverse Voltage Maximum Reverse Leakage Current @ VRWM VBR IPP Parameter Breakdown Voltage @ IT IT Test Current IF Forward Current VF Forward Voltage @ IF Uni−Directional TVS ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 1.2 V Max. @ IF = 0.5 A for all types) Breakdown Voltage VRWM (Note 4) IR @ VRWM VBR (V) (Note 5) Zzt @ IT @ IT Typ Max Device Device Marking Volts A Min Nom Max mA BZG03C15 G15 11 1 13.8 15.0 15.6 50 5.0 10.0 BZG03C150 G150 110 1 138 150 156 5 130 300 4. A transient suppressor is normally selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak operating voltage level 5. VBR measured at pulse test current IT at an ambient temperature of 25°C http://onsemi.com 2 BZG03C15 Series RATING AND TYPICAL CHARACTERISTIC CURVES 10,000 NONREPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 2. TA = 25°C 10 C, CAPACITANCE (pF) Ppk , PEAK POWER (kW) 100 1 0.1 10−4 0.001 0.01 0.1 tP, PULSE WIDTH (ms) 1 1,000 MEASURED AT STAND−OFF VOLTAGE, VWM 100 10 10 MEASURED AT ZERO BIAS 1 Figure 1. Pulse Rating Curve PD , MAXIMUM POWER DISSIPATION (WATTS) PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 10 x 1000 WAVEFORM AS DEFINED BY R.E.A. 80 60 40 20 0 0 40 80 120 160 TA, AMBIENT TEMPERATURE (°C) 2 5 10 20 50 V(BR), BREAKDOWN VOLTAGE (VOLTS) 100 200 Figure 3. Typical Junction Capacitance 120 100 TJ = 25°C f = 1 MHz Vsig = 50 mVp−p 200 6 5 4 3 @ TL = 75°C PD = 1.5 W 2 @ TA = 25°C PD = 0.5 W 1 0 0 25 50 75 100 T, TEMPERATURE (°C) 125 Figure 4. Steady State Power Derating Figure 2. Pulse Derating Curve http://onsemi.com 3 150 BZG03C15 Series PACKAGE DIMENSIONS SMA CASE 403D−02 ISSUE A S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 403D−01 OBSOLETE, NEW STANDARD IS 403D−02. A D B DIM A B C D H J K S POLARITY INDICATOR OPTIONAL AS NEEDED INCHES MIN MAX 0.160 0.180 0.090 0.115 0.075 0.095 0.050 0.064 0.002 0.006 0.006 0.016 0.030 0.060 0.190 0.220 MILLIMETERS MIN MAX 4.06 4.57 2.29 2.92 1.91 2.41 1.27 1.63 0.05 0.15 0.15 0.41 0.76 1.52 4.83 5.59 C K J H SURMETIC is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. BZG03C15/D