CAR2548FP Series 2500 Watt 48V Front End Power Supply Features: ∎ Leading Edge Power Density, 27W/in3 in 1U Form Factor ∎ I2C Serial Bus and PMBus Interface ∎ Full Features Status & Control (Current, Voltage, AC OK, DC OK & Temperature OK), ∎ Active Current Sharing (Single Wire) ∎ Remote On/Off, Remote Sense, Voltage Program Circuits ∎ Microprocessor Based Design Allows for Automatic Fan Speed Control ∎ Optional Universal / 4-Bay 19” Rack Delivers 10kW of Power FEATURES High Power Density 27W/in3 Load Sharing & Fault Tolerant Automatic Fan Speed Control System Scalability up to 10,000 Watts Universal Input & International Certifications BENEFITS More system space for application circuits and hardware Excellent reliability in N+1 operation Reduces audible noise and increases reliability Allows flexibility with minimum investment SPECIFICATIONS Input Voltage Range Input Current Maximum Inrush Current Input Protection Power Factor Efficiency Output Power Output Voltage Range Output Current Standby Bias Voltage Voltage Regulation Ouput Ripple & Noise 2500 Watt +48V Front End Power Supply 90-264 VAC, 47-63 Hz 16A @ 180VAC, Full Load (max) 50A max. cold start (per ETS 300 132-1 and Bellcore specifications) Dual Fused (Line & Neutral) 20 Amp / 250 VAC Type 3AB Axial 0.99 typical complies with IEC555, EN60555-2, EN61000-3-2 92% typical at 230 VAC Full Load Operation (including OR’ing Mosfets) 2500W at High Line Operation (180-264 VAC), 1200W at Low Line Operation (90-132 VAC) +48 VDC (±10% with remote programming) 52A @48V 5VSB@1A, reference to Vout Return ±2% of Vnom for any combination of line, load and temperature Complies with ETS300 132-2, 32dBnrc. Bandwidth: 25Hz - 20kHz. 2mVrms pk-pk with 0.1μF ceramic and 10μF electrolytics caps at the output 5% max deviation Recovery time 300μs @ 50% load step and di/dt < 1A/μs 200kHz (input) / 400kHz (output) 16.8msec (230 VAC full load) ON if >3V or open; OFF if <1V (max. sink 1mA) Open collector type 110-130% of Iout nominal Self protected with auto recovery -60 VDC max, latched. Reset condition by recycling AC input or toggling remote on/off -10°C to +70°C. power derating above 50°C at 2.5% per °C Non latching; protection active at 110°C internal temperature, restart at 95°C (typical) FCC-B & EN55022-B with specified filter or at rack level, GR-1089-CORE Green = AC OK & DC OK, Red = Fault Voltage Programming (V Prog), Load sharing (I Share), Remote On/Off, Current Monitor (I Monitor), Over temperature (Temp Warning), Fault, PS Present, Module Enable I2C Option and PMBus Option, see detailed specification for details IEC68-2-27, MIL-STD-810E, Telcordia GR-63-CORE 14.25 x 4.00 x 1.65” / 362 x 102 x 41.9mm 4.73lbs / 2.15kg IEC/UL/CSA/EN60950-1, CE Mark (LVD), TUV I2C Interface, PMBus, Bezel, 5VSB Output Transient Response Switching Frequency Hold-Up Time Remote On/Off Current Limit Protection Short Circuit Protection Over Voltage Protection Operating Temperature Over Temperature Protection EMI LED Indicators Analog Status & Control Digital Status & Control Shock & Vibration Dimensions Weight Safety Approvals Options Reduces logistical costs KEY MARKET SEGMENTS & APPLICATIONS ∎ Distributed Power ∎ RF Amplifiers ∎ High End Servers ∎ ATE Equipment ∎ High End Routers and Switchgear ∎ Semiconductor Burn-in Equipment rev 100506 www.lineagepower.com/oem Lineage Power Lineage Power Lineage Power (China) 3000 Skyline Dr. Mesquite, TX 75149 Phone: (972) 284-2000 2841 Dow Avenue Tustin, CA 92780 USA Phone: (714) 544-6665 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Shanghai, 201401 China Phone: 021 6710 8910 CAR2548FP Series 2500 Watt 48V Front End Power Supply OUTLINE DRAWING All Dimensions in Inches (mm) Tolerance: .XX = ± .02 in (.50 mm) .XXX = ± .010 in (.254 mm) PART NUMBER DEFINITION GUIDE: CONNECTOR DRAWING: CAR 25 48 F P x x xx -1A Series 25=2500W Output Current 48=48V Output Voltage F=Front End Type P=Positive Polarity Examples: Rev. Blank=Non-compliant YO=5 of 6 Compliant ZO=6 of 6 Compliant RoHS Blank = PM Bus C=I2C A = CAN Bus Interface B=Bezel Option Blank=None Options CAR2548FPBCZO-1A 2500W/48V Front End, Bezel, I2C, 6 of 6 RoHS CAR2548FPBAZO-1A 2500W/48V Front End, Bezel, CAN Bus 6 of 6 RoHS compliance D1 D2 D3 D4 D5 D6 P1 P2 P3 C1 C2 C3 C4 C5 C6 B1 B2 B3 B4 B5 B6 P4 P5 P6 P7 A1 A2 A3 A4 A5 A6 Connector FCI Berg P/N 51939-030 Mating connector FCI Berg P/N 51915-051 PIN OUT INFORMATION A1 VSB 3.3V B4 Module Enable D1 V Prog P4 Vout A2 VSB 3.3V Return B5 Serial Data Line D2 OVP Test Point P5 Vout A3 Signal RTN B6 Serial Data Clock D3 Remote On/Off P6 Vout Return A4 Write Protect C1 I Share D4 DC OK P7 Vout Return A5 Remote Sense (+) C2 Protocol Select D5 AC OK A6 Remote Sense (-) C3 Temp Warning D6 Interrupt B1 Fault C4 I2C Address (A0) P1 Line B2 I Monitor C5 I2C Address (A1) P2 Neutral B3 PS Present C6 I2C Address (A2) P3 Chassis rev 100506 www.lineagepower.com/oem Lineage Power Lineage Power Lineage Power (China) 3000 Skyline Dr. Mesquite, TX 75149 Phone: (972) 284-2000 2841 Dow Avenue Tustin, CA 92780 USA Phone: (714) 544-6665 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Shanghai, 201401 China Phone: 021 6710 8910