TI CD4052BME4

CD4051B, CD4052B, CD4053B
August 1998 - Revised October 2003
Data sheet acquired from Harris Semiconductor
SCHS047G
Features
• Wide Range of Digital and Analog Signal Levels
- Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3V to 20V
- Analog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤20VP-P
[ /Title • Low ON Resistance, 125Ω (Typ) Over 15VP-P Signal Input
Range for VDD -VEE = 18V
(CD405
• High OFF Resistance, Channel Leakage of ±100pA (Typ)
1B,
CD4052 at VDD -VEE = 18V
• Logic-Level Conversion for Digital Addressing Signals of
B,
to 20V (VDD -VSS = 3V to 20V) to Switch Analog
CD4053 3V
Signals to 20VP-P (VDD -VEE = 20V)
B)
• Matched Switch Characteristics, rON = 5Ω (Typ) for
/SubVDD -VEE = 15V
ject
Low Quiescent Power Dissipation Under All Digital(CMOS • Very
Control Input and Supply Conditions, 0.2µW (Typ) at
Analog
VDD -VSS = VDD -VEE = 10V
Multi• Binary Address Decoding on Chip
plexers/Dem • 5V, 10V, and 15V Parametric Ratings
ultiplex- • 100% Tested for Quiescent Current at 20V
ers with • Maximum Input Current of 1µA at 18V Over Full Package
Temperature Range, 100nA at 18V and 25oC
Logic
Level
• Break-Before-Make Switching Eliminates Channel
Overlap
Conversion)
/Author Applications
• Analog and Digital Multiplexing and Demultiplexing
()
/Key• A/D and D/A Conversion
words
• Signal Gating
(Harris
CMOS Analog Multiplexers/Demultiplexers
Semiconduc- with Logic Level Conversion
tor,
The CD4051B, CD4052B, and CD4053B analog multiplexers
CD4000 are digitally-controlled analog switches having low ON
The CD4051B is a single 8-Channel multiplexer having three
binary control inputs, A, B, and C, and an inhibit input. The
three binary signals select 1 of 8 channels to be turned on,
and connect one of the 8 inputs to the output.
The CD4052B is a differential 4-Channel multiplexer having
two binary control inputs, A and B, and an inhibit input. The
two binary input signals select 1 of 4 pairs of channels to be
turned on and connect the analog inputs to the outputs.
The CD4053B is a triple 2-Channel multiplexer having three
separate digital control inputs, A, B, and C, and an inhibit
input. Each control input selects one of a pair of channels
which are connected in a single-pole, double-throw
configuration.
When these devices are used as demultiplexers, the
“CHANNEL IN/OUT” terminals are the outputs and the
“COMMON OUT/IN” terminals are the inputs.
Ordering Information
PART NUMBER
TEMP. RANGE
(oC)
PACKAGE
CD4051BF3A, CD4052BF3A,
CD4053BF3A
-55 to 125
16 Ld CERAMIC
DIP
CD4051BE, CD4052BE,
CD4053BE
-55 to 125
16 Ld PDIP
CD4051BM, CD4051BMT,
CD4051BM96
CD4052BM, CD4052BMT,
CD4052BM96
CD4053BM, CD4053BMT,
CD4053BM96
-55 to 125
16 Ld SOIC
CD4051BNSR, CD4052BNSR,
CD4053BNSR
-55 to 125
16 Ld SOP
CD4051BPW, CD4051BPWR,
CD4052BPW, CD4052BPWR
CD4053BPW, CD4053BPWR
-55 to 125
16 Ld TSSOP
NOTE: When ordering, use the entire part number. The suffixes 96
and R denote tape and reel. The suffix T denotes a small-quantity
reel of 250.
impedance and very low OFF leakage current. Control of
analog signals up to 20VP-P can be achieved by digital
signal amplitudes of 4.5V to 20V (if VDD -VSS = 3V, a
VDD -VEE of up to 13V can be controlled; for VDD -VEE level
differences above 13V, a VDD -VSS of at least 4.5V is
required). For example, if VDD = +4.5V, VSS = 0V, and
VEE = -13.5V, analog signals from -13.5V to +4.5V can be
controlled by digital inputs of 0V to 5V. These multiplexer
circuits dissipate extremely low quiescent power over the
full VDD -VSS and VDD -VEE supply-voltage ranges,
independent of the logic state of the control signals. When
a logic “1” is present at the inhibit input terminal, all
channels are off.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
Copyright © 2003, Texas Instruments Incorporated
CD4051B, CD4052B, CD4053B
Pinouts
CD4051B (PDIP, CDIP, SOIC, SOP, TSSOP)
TOP VIEW
4 1
16 VDD
6 2
15 2
COM OUT/IN 3
14 1
7 4
13 0
CHANNELS
IN/OUT
CD4052B (PDIP, CDIP, SOP, TSSOP)
TOP VIEW
0 1
16 VDD
2 2
15 2
COMMON “Y” OUT/IN 3
14 1
Y CHANNELS
IN/OUT
X CHANNELS
IN/OUT
CHANNELS IN/OUT
CHANNELS
IN/OUT
Y CHANNELS
IN/OUT
3 4
13 COMMON “X” OUT/IN
5 5
12 3
1 5
12 0
INH 6
11 A
INH 6
11 3
VEE 7
10 B
VEE 7
10 A
VSS 8
9 C
VSS 8
9 B
X CHANNELS
IN/OUT
CD4053B (PDIP, CDIP, SOP, TSSOP)
TOP VIEW
IN/OUT
by 1
16 VDD
bx 2
15 OUT/IN bx OR by
cy 3
14 OUT/IN ax OR ay
OUT/IN CX OR CY 4
13 ay
IN/OUT CX 5
12 ax
INH 6
11 A
VEE 7
10 B
VSS 8
9 C
IN/OUT
Functional Block Diagrams
CD4051B
CHANNEL IN/OUT
16 VDD
7
6
5
4
3
2
1
0
4
2
5
1
12
15
14
13
TG
TG
A
†
11
TG
B
†
10
LOGIC
LEVEL
CONVERSION
C
†
9
INH
†
6
BINARY
TO
1 OF 8
DECODER
WITH
INHIBIT
TG
3
TG
TG
TG
TG
8 VSS
7 VEE
† All inputs are protected by standard CMOS protection network.
2
COMMON
OUT/IN
CD4051B, CD4052B, CD4053B
Functional Block Diagrams
(Continued)
CD4052B
X CHANNELS IN/OUT
3
2
1
0
11
15
14
12
TG
16 VDD
A
†
10
B
†
9
INH
†
6
TG
BINARY
TO
1 OF 4
DECODER
WITH
INHIBIT
LOGIC
LEVEL
CONVERSION
TG
COMMON X
OUT/IN
TG
13
TG
TG
3
COMMON Y
OUT/IN
TG
TG
8 VSS
7
VEE
1
5
2
4
0
1
2
3
Y CHANNELS IN/OUT
CD4053B
LOGIC
LEVEL
CONVERSION
16 VDD
BINARY TO
1 OF 2
DECODERS
WITH
INHIBIT
IN/OUT
cy
cx
by
bx
ay
ax
3
5
1
2
13
12
TG
COMMON
OUT/IN
ax OR ay
14
A
†
11
TG
TG
COMMON
OUT/IN
bx OR by
15
B
C
†
†
10
TG
TG
9
4
TG
INH
†
COMMON
OUT/IN
cx OR cy
6
VDD
8
VSS
7
VEE
† All inputs are protected by standard CMOS protection network.
3
CD4051B, CD4052B, CD4053B
TRUTH TABLES
INPUT STATES
INHIBIT
C
B
A
“ON” CHANNEL(S)
0
0
0
0
0
0
0
0
1
1
0
0
1
0
2
0
0
1
1
3
0
1
0
0
4
0
1
0
1
5
0
1
1
0
6
0
1
1
1
7
1
X
X
X
None
CD4051B
CD4052B
INHIBIT
B
A
0
0
0
0x, 0y
0
0
1
1x, 1y
0
1
0
2x, 2y
0
1
1
3x, 3y
1
X
X
None
CD4053B
INHIBIT
A OR B OR C
0
0
ax or bx or cx
0
1
ay or by or cy
1
X
None
X = Don’t Care
4
CD4051B, CD4052B, CD4053B
Absolute Maximum Ratings
Thermal Information
Supply Voltage (V+ to V-)
Voltages Referenced to VSS Terminal . . . . . . . . . . . -0.5V to 20V
DC Input Voltage Range . . . . . . . . . . . . . . . . . . -0.5V to VDD +0.5V
DC Input Current, Any One Input. . . . . . . . . . . . . . . . . . . . . . ±10mA
Package Thermal Impedance, θJA (see Note 1):
E (PDIP) package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67oC/W
M (SOIC) package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73oC/W
NS (SOP) package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64oC/W
PW (TSSOP) package . . . . . . . . . . . . . . . . . . . . . . . . . . 108oC/W
Maximum Junction Temperature (Ceramic Package) . . . . . . . . .175oC
Maximum Junction Temperature (Plastic Package) . . . . . . . .150oC
Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . .265oC
(SOIC - Lead Tips Only)
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. The package thermal impedance is calculated in accordance with JESD 51-7.
Common Conditions Here: If Whole Table is For the Full Temp. Range, VSUPPLY = ±5V, AV = +1,
RL = 100Ω, Unless Otherwise Specified (Note 3)
Electrical Specifications
LIMITS AT INDICATED TEMPERATURES (oC)
CONDITIONS
25
PARAMETER
VIS (V)
VEE (V)
VSS (V)
VDD (V)
-55
-40
85
125
MIN
TYP
MAX
UNITS
SIGNAL INPUTS (VIS) AND OUTPUTS (VOS)
-
-
-
5
5
5
150
150
-
0.04
5
µA
-
-
-
10
10
10
300
300
-
0.04
10
µA
-
-
-
15
20
20
600
600
-
0.04
20
µA
-
-
-
20
100
100
3000
3000
-
0.08
100
µA
-
0
0
5
800
850
1200
1300
-
470
1050
Ω
-
0
0
10
310
330
520
550
-
180
400
Ω
-
0
0
15
200
210
300
320
-
125
240
Ω
Change in ON
Resistance (Between
Any Two Channels),
∆rON
-
0
0
5
-
-
-
-
-
15
-
Ω
-
0
0
10
-
-
-
-
-
10
-
Ω
-
0
0
15
-
-
-
-
-
5
-
Ω
OFF Channel Leakage
Current: Any Channel
OFF (Max) or ALL
Channels OFF (Common
OUT/IN) (Max)
-
0
0
18
-
±0.01
±100
(Note 2)
nA
Capacitance:
-
-5
5-
5
Quiescent Device
Current, IDD Max
Drain to Source ON
Resistance rON Max
0 ≤ VIS ≤ VDD
Input, CIS
±100 (Note 2)
±1000 (Note 2)
-
-
-
-
-
5
-
pF
CD4051
-
-
-
-
-
30
-
pF
CD4052
-
-
-
-
-
18
-
pF
CD4053
-
-
-
-
-
9
-
pF
-
-
-
-
-
0.2
-
pF
5
-
-
-
-
-
30
60
ns
10
-
-
-
-
-
15
30
ns
15
-
-
-
-
-
10
20
ns
Output, COS
Feedthrough
CIOS
Propagation Delay Time
(Signal Input to Output
VDD
5
RL = 200kΩ,
CL = 50pF,
tr , tf = 20ns
CD4051B, CD4052B, CD4053B
Common Conditions Here: If Whole Table is For the Full Temp. Range, VSUPPLY = ±5V, AV = +1,
RL = 100Ω, Unless Otherwise Specified (Continued) (Note 3)
Electrical Specifications
LIMITS AT INDICATED TEMPERATURES (oC)
CONDITIONS
25
PARAMETER
VIS (V)
VEE (V)
VSS (V)
VDD (V)
-55
-40
85
125
MIN
TYP
MAX
UNITS
5
1.5
1.5
1.5
1.5
-
-
1.5
V
10
3
3
3
3
-
-
3
V
15
4
4
4
4
-
-
4
V
5
3.5
3.5
3.5
3.5
3.5
-
-
V
10
7
7
7
7
7
-
-
V
15
11
11
11
11
11
-
-
V
±0.1
µA
CONTROL (ADDRESS OR INHIBIT), VC
Input Low Voltage, VIL ,
Max
VIL = VDD
through
1kΩ;
VIH = VDD
through
Input High Voltage, VIH , 1kΩ
Min
Input Current, IIN (Max)
VEE = VSS ,
RL = 1kΩ to VSS ,
IIS < 2µA on All
OFF Channels
VIN = 0, 18
18
±0.1
±0.1
±1
±1
-
±10-5
Propagation Delay Time:
Address-to-Signal
tr , tf = 20ns,
OUT (Channels ON or CL = 50pF,
OFF) See Figures 10, RL = 10kΩ
11, 14
0
0
5
-
-
-
-
-
450
720
ns
0
0
10
-
-
-
-
-
160
320
ns
0
0
15
-
-
-
-
-
120
240
ns
-5
0
5
-
-
-
-
-
225
450
ns
0
0
5
-
-
-
-
-
400
720
ns
0
0
10
-
-
-
-
-
160
320
ns
0
0
15
-
-
-
-
-
120
240
ns
-10
0
5
-
-
-
-
-
200
400
ns
0
0
5
-
-
-
-
-
200
450
ns
0
0
10
-
-
-
-
-
90
210
ns
0
0
15
-
-
-
-
-
70
160
ns
-10
0
5
-
-
-
-
-
130
300
ns
-
-
-
-
-
5
7.5
pF
Propagation Delay Time:
Inhibit-to-Signal OUT tr , tf = 20ns,
(Channel Turning ON) CL = 50pF,
See Figure 11
RL = 1kΩ
Propagation Delay Time:
Inhibit-to-Signal OUT
(Channel Turning
OFF) See Figure 15
tr , tf = 20ns,
CL = 50pF,
RL = 10kΩ
Input Capacitance, CIN
(Any Address or Inhibit
Input)
NOTE:
2. Determined by minimum feasible leakage measurement for automatic testing.
Electrical Specifications
TEST CONDITIONS
PARAMETER
VIS (V)
VDD (V)
RL (kΩ)
Cutoff (-3dB) Frequency Channel ON (Sine Wave Input)
5 (Note 3)
10
1
VOS at Common OUT/IN
VEE = VSS ,
V OS
20Log ------------ = – 3dB
V IS
6
VOS at Any Channel
LIMITS
TYP
UNITS
CD4053
30
MHz
CD4052
25
MHz
CD4051
20
MHz
60
MHz
CD4051B, CD4052B, CD4053B
Electrical Specifications
TEST CONDITIONS
LIMITS
PARAMETER
VIS (V)
VDD (V)
RL (kΩ)
TYP
UNITS
Total Harmonic Distortion, THD
2 (Note 3)
5
10
0.3
%
3 (Note 3)
10
0.2
%
5 (Note 3)
15
0.12
%
VEE = VSS, fIS = 1kHz Sine Wave
-40dB Feedthrough Frequency
(All Channels OFF)
5 (Note 3)
10
1
VOS at Common OUT/IN
CD4053
8
MHz
CD4052
10
MHz
CD4051
12
MHz
VOS at Any Channel
8
MHz
Between Any 2 Channels
3
MHz
Between Sections,
CD4052 Only
Measured on Common
6
MHz
Measured on Any Channel
10
MHz
Between Any Two
Sections, CD4053
Only
In Pin 2, Out Pin 14
2.5
MHz
In Pin 15, Out Pin 14
6
MHz
10
(Note 4)
65
mVPEAK
VEE = 0, VSS = 0, tr , tf = 20ns, VCC
= VDD - VSS (Square Wave)
65
mVPEAK
VEE = VSS ,
V OS
20Log ------------ = – 40dB
V IS
-40dB Signal Crosstalk
Frequency
%
5 (Note 3)
10
1
VEE = VSS ,
V OS
20Log ------------ = – 40dB
V IS
Address-or-Inhibit-to-Signal
Crosstalk
-
10
NOTES:
V DD – V EE
----------------------------2
3. Peak-to-Peak voltage symmetrical about
4. Both ends of channel.
Typical Performance Curves
300
VDD - VEE = 10V
VDD - VEE = 5V
rON , CHANNEL ON RESISTANCE (Ω)
rON , CHANNEL ON RESISTANCE (Ω)
600
500
400
TA = 125oC
300
TA = 25oC
200
TA = -55oC
100
0
-4
-3
-2
-1
0
1
2
3
4
VIS , INPUT SIGNAL VOLTAGE (V)
FIGURE 1. CHANNEL ON RESISTANCE vs INPUT SIGNAL
VOLTAGE (ALL TYPES)
7
5
250
TA = 125oC
200
150
TA = 25oC
100
TA = -55oC
50
0
-10
-7.5
-5
-2.5
0
2.5
5
VIS , INPUT SIGNAL VOLTAGE (V)
7.5
FIGURE 2. CHANNEL ON RESISTANCE vs INPUT SIGNAL
VOLTAGE (ALL TYPES)
10
CD4051B, CD4052B, CD4053B
Typical Performance Curves
(Continued)
600
250
rON , CHANNEL ON RESISTANCE (Ω)
rON , CHANNEL ON RESISTANCE (Ω)
TA = 25oC
VDD - VEE = 5V
500
400
300
200
10V
15V
100
0
-10
-7.5
-5
-2.5
0
2.5
5
7.5
VDD - VEE = 15V
200
TA = 125oC
150
TA = 25oC
100
TA = -55oC
50
0
-10
10
-7.5
-5
FIGURE 3. CHANNEL ON RESISTANCE vs INPUT SIGNAL
VOLTAGE (ALL TYPES)
PD , POWER DISSIPATION PACKAGE (µW)
100Ω
-2
-4
-2
0
2
4
VIS , INPUT SIGNAL VOLTAGE (V)
TA = 25oC
ALTERNATING “O”
AND “I” PATTERN
CL = 50pF
f
VDD = 15V
103
VDD = 10V
102
VDD = 5V
CL = 15pF
10
1
10
TEST CIRCUIT
VDD
CD4029
VDD B/D
A B
100Ω
10 9
1
3 CL
13
5
12
2
4 CD4052 14
15
6
11
7
8
Ι
102
103
104
SWITCHING FREQUENCY (kHz)
105
FIGURE 7. DYNAMIC POWER DISSIPATION vs SWITCHING
FREQUENCY (CD4052B)
8
VDD = 5V
10
B/D
CD4029
A B C
VDD
100Ω 11 10 9
13
14
15
12 CD4051
1
5
3
2
48 7 6 C
L
100Ω
Ι
CL = 15pF
1
100Ω
PD , POWER DISSIPATION PACKAGE (µW)
VDD = 10V
10
6
FIGURE 5. ON CHARACTERISTICS FOR 1 OF 8 CHANNELS
(CD4051B)
104
7.5
f
VDD = 15V
102
-4
10
102
103
104
SWITCHING FREQUENCY (kHz)
105
FIGURE 6. DYNAMIC POWER DISSIPATION vs SWITCHING
FREQUENCY (CD4051B)
PD , POWER DISSIPATION PACKAGE (µW)
VOS , OUTPUT SIGNAL VOLTAGE (V)
1kΩ
500Ω
103
-6
5
TEST CIRCUIT
VDD
TA = 25oC
ALTERNATING “O”
AND “I” PATTERN
CL = 50pF
104
RL = 100kΩ, RL = 10kΩ
0
105
2.5
105
VDD = 5V
VSS = 0V
VEE = -5V
TA = 25oC
2
-6
0
FIGURE 4. CHANNEL ON RESISTANCE vs INPUT SIGNAL
VOLTAGE (ALL TYPES)
6
4
-2.5
VIS , INPUT SIGNAL VOLTAGE (V)
VIS , INPUT SIGNAL VOLTAGE (V)
105
TA = 25oC
ALTERNATING “O”
AND “I” PATTERN
CL = 50pF
104
103
VDD = 5V
102
CL = 15pF
VDD = 15V
VDD = 10V
TEST CIRCUIT
VDD f
9
4
CL
100Ω
3
12
5
13
100Ω
CD4053 2
10
1
15
11
14
6
7
8
Ι
10
1
10
102
103
104
SWITCHING FREQUENCY (kHz)
105
FIGURE 8. DYNAMIC POWER DISSIPATION vs SWITCHING
FREQUENCY (CD4053B)
CD4051B, CD4052B, CD4053B
Test Circuits and Waveforms
VDD = 15V
VDD = 7.5V
VDD = 5V
VDD = 5V
5V
7.5V
16
5V
16
16
16
VSS = 0V
VSS = 0V
VSS = 0V
VEE = 0V
7
8
VEE = -7.5V
7
8
VEE = -10V
7
8
7
8
VEE = -5V
VSS = 0V
(D)
(C)
(B)
(A)
NOTE: The ADDRESS (digital-control inputs) and INHIBIT logic levels
are: “0” = VSS and “1” = VDD. The analog signal (through the TG) may
swing from VEE to VDD.
FIGURE 9. TYPICAL BIAS VOLTAGES
tr = 20ns
tr = 20ns
tf = 20ns
90%
50%
90%
50%
10%
tf = 20ns
90%
50%
90%
50%
10%
10%
10%
TURN-ON TIME
90%
50%
90%
10%
10%
10%
TURN-OFF TIME
TURN-OFF TIME
FIGURE 10. WAVEFORMS, CHANNEL BEING TURNED ON
(RL = 1kΩ)
FIGURE 11. WAVEFORMS, CHANNEL BEING TURNED OFF
(RL = 1kΩ)
VDD
VDD
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
CD4051
IDD
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
CD4052
VDD
IDD
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
CD4053
FIGURE 12. OFF CHANNEL LEAKAGE CURRENT - ANY CHANNEL OFF
9
TURN-ON
TIME
tPHZ
IDD
CD4051B, CD4052B, CD4053B
Test Circuits and Waveforms (Continued)
VDD
1
2
3
4
5
6
7
8
IDD
VDD
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
IDD
VDD
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
CD4052
CD4051
16
15
14
13
12
11
10
9
IDD
CD4053
FIGURE 13. OFF CHANNEL LEAKAGE CURRENT - ALL CHANNELS OFF
VDD
1
2
3
4
5
6
7
8
VDD
VEE
VSS
16
15
14
13
12
11
10
9
OUTPUT
VDD
OUTPUT
OUTPUT
1
RL
CL
2
RL
CL
3
VDD
VEE
4
VDD
5
VEE
6
VEE
VSS CLOCK
7
IN
8
VSS
VSS
CD4051
16
15
14
13
12
11
10
9
VDD
VEE
VDD
VSS CLOCK
VSS
IN
VSS
CD4052
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
CD4053
RL
CL
VEE
VDD
VSS CLOCK
IN
VSS
FIGURE 14. PROPAGATION DELAY - ADDRESS INPUT TO SIGNAL OUTPUT
VDD
OUTPUT
RL
1
2
3
4
5
6
7
8
50pF
VEE
VDD
VSS
VDD
CLOCK VEE
IN
VSS
16
15
14
13
12
11
10
9
VDD
OUTPUT
50pF
RL
VEE
VDD
VSS
VDD
CLOCK VEE
IN VSS
tPHL AND tPLH VSS
CD4051
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
OUTPUT
RL
50pF
VEE
VDD
VDD
VSS CLOCK VEE
IN VSS
V
tPHL AND tPLH SS
CD4052
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
VDD
V
tPHL AND tPLH SS
CD4053
FIGURE 15. PROPAGATION DELAY - INHIBIT INPUT TO SIGNAL OUTPUT
VDD
VIH
1K
VIH
VIL
VDD
VDD
µA
1K
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
VIH
VIL
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
1K
1K
µA
VIH
1K
VIL
VIH
VIL
MEASURE < 2µA ON ALL
“OFF” CHANNELS (e.g., CHANNEL 6)
1K
µA
VIH
VIL
VIL
MEASURE < 2µA ON ALL
“OFF” CHANNELS (e.g., CHANNEL 2x)
MEASURE < 2µA ON ALL
“OFF” CHANNELS (e.g., CHANNEL by)
FIGURE 16. INPUT VOLTAGE TEST CIRCUITS (NOISE IMMUNITY)
10
16
15
14
13
12
11
10
9
CD4053B
CD4052B
CD4051B
1
2
3
4
5
6
7
8
CD4051B, CD4052B, CD4053B
Test Circuits and Waveforms (Continued)
VDD
VDD
1
2
3
4
5
6
7
8
Ι
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
Ι
CD4051
CD4053
VDD
16
15
14
13
12
11
10
9
KEITHLEY
160 DIGITAL
MULTIMETER
TG
“ON”
10kΩ
X-Y
PLOTTER
FIGURE 18. CHANNEL ON RESISTANCE MEASUREMENT
CIRCUIT
VDD
1
2
3
4
5
6
7
8
VDD
Ι
VSS
CD4051
CD4053
VSS
X
H.P.
MOSELEY
7030A
CD4052
VDD
16
15
14
13
12
11
10
9
Y
VSS
FIGURE 17. QUIESCENT DEVICE CURRENT
1
2
3
4
5
6
7
8
1kΩ
RANGE
VSS
16
15
14
13
12
11
10
9
VDD
Ι
VSS
CD4052
NOTE: Measure inputs sequentially,
to both VDD and VSS connect all
unused inputs to either VDD or VSS .
NOTE: Measure inputs sequentially,
to both VDD and VSS connect all
unused inputs to either VDD or VSS .
FIGURE 19. INPUT CURRENT
5VP-P
CHANNEL
ON
5VP-P
OFF
CHANNEL
VDD
RF
VM
RL
1K
RL
RL
RL
FIGURE 20. FEEDTHROUGH (ALL TYPES)
FIGURE 21. CROSSTALK BETWEEN ANY TWO CHANNELS
(ALL TYPES)
CHANNEL IN Y
ON OR OFF
CHANNEL IN X
ON OR OFF
RL
RF
VM
RL
FIGURE 22. CROSSTALK BETWEEN DUALS OR TRIPLETS (CD4052B, CD4053B)
11
RF
VM
CHANNEL
ON
RF
VM
CHANNEL
OFF
6
7
8
5VP-P
COMMON
CHANNEL
OFF
CD4051B, CD4052B, CD4053B
Test Circuits and Waveforms (Continued)
DIFFERENTIAL
SIGNALS
CD4052
CD4052
COMMUNICATIONS
LINK
DIFF.
AMPLIFIER/
LINE DRIVER
DIFF.
MULTIPLEXING
DIFF.
RECEIVER
DEMULTIPLEXING
FIGURE 23. TYPICAL TIME-DIVISION APPLICATION OF THE CD4052B
Special Considerations
In applications where separate power sources are used to
drive VDD and the signal inputs, the VDD current capability
should exceed VDD/RL (RL = effective external load). This
provision avoids permanent current flow or clamp action on
the VDD supply when power is applied or removed from the
CD4051B, CD4052B or CD4053B.
A
B
CD4051B
C
INH
A
B
C
D
E
Q0
A
B
E
1/2
CD4556
A
B
CD4051B
C
INH
Q1
Q2
A
B
CD4051B
C
INH
FIGURE 24. 24-TO-1 MUX ADDRESSING
12
COMMON
OUTPUT
PACKAGE OPTION ADDENDUM
www.ti.com
14-May-2010
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
7901502EA
ACTIVE
CDIP
J
16
1
TBD
A42
N / A for Pkg Type
8101801EA
ACTIVE
CDIP
J
16
1
TBD
A42
N / A for Pkg Type
CD4051BE
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
CD4051BEE4
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
Lead/Ball Finish
MSL Peak Temp (3)
CD4051BF
ACTIVE
CDIP
J
16
1
TBD
A42
N / A for Pkg Type
CD4051BF3A
ACTIVE
CDIP
J
16
1
TBD
A42
N / A for Pkg Type
CD4051BF3AS2283
OBSOLETE
CDIP
J
16
TBD
Call TI
CD4051BM
ACTIVE
SOIC
D
16
40
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4051BM96
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4051BM96E4
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4051BM96G3
PREVIEW
SOIC
D
16
2500
CD4051BM96G4
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CD4051BME4
ACTIVE
SOIC
D
16
40
CD4051BMG4
ACTIVE
SOIC
D
16
CD4051BMT
ACTIVE
SOIC
D
CD4051BMTE4
ACTIVE
SOIC
CD4051BMTG4
ACTIVE
CD4051BNSR
TBD
Call TI
Call TI
Call TI
CU NIPDAU
Level-1-260C-UNLIM
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
40
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
16
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
D
16
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SOIC
D
16
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4051BNSRE4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4051BNSRG4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4051BPW
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4051BPWE4
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4051BPWG4
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4051BPWR
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4051BPWRE4
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4051BPWRG4
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4052BE
ACTIVE
PDIP
N
16
CU NIPDAU
N / A for Pkg Type
25
Addendum-Page 1
Pb-Free
(RoHS)
PACKAGE OPTION ADDENDUM
www.ti.com
14-May-2010
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
CD4052BEE4
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
Lead/Ball Finish
MSL Peak Temp (3)
CD4052BF
ACTIVE
CDIP
J
16
1
TBD
A42
N / A for Pkg Type
CD4052BF3A
ACTIVE
CDIP
J
16
1
TBD
A42
N / A for Pkg Type
CD4052BM
ACTIVE
SOIC
D
16
40
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4052BM96
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4052BM96E4
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4052BM96G3
PREVIEW
SOIC
D
16
2500
CD4052BM96G4
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CD4052BME4
ACTIVE
SOIC
D
16
40
CD4052BMG4
ACTIVE
SOIC
D
16
CD4052BMT
ACTIVE
SOIC
D
CD4052BMTE4
ACTIVE
SOIC
CD4052BMTG4
ACTIVE
CD4052BNSR
TBD
Call TI
Call TI
CU NIPDAU
Level-1-260C-UNLIM
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
40
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
16
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
D
16
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SOIC
D
16
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4052BNSRE4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4052BNSRG4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4052BPW
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4052BPWE4
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4052BPWG4
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4052BPWR
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4052BPWRE4
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4052BPWRG3
PREVIEW
TSSOP
PW
16
2000
CD4052BPWRG4
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CD4053BE
ACTIVE
PDIP
N
16
25
CD4053BEE4
ACTIVE
PDIP
N
16
CD4053BF
ACTIVE
CDIP
J
TBD
Call TI
Call TI
CU NIPDAU
Level-1-260C-UNLIM
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
16
1
TBD
A42
N / A for Pkg Type
1
TBD
A42
N / A for Pkg Type
TBD
Call TI
Green (RoHS &
CU NIPDAU
CD4053BF3A
ACTIVE
CDIP
J
16
CD4053BF3AS2283
OBSOLETE
CDIP
J
16
CD4053BM
ACTIVE
SOIC
D
16
40
Addendum-Page 2
Call TI
Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com
14-May-2010
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
CD4053BM96
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4053BM96E4
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4053BM96G3
PREVIEW
SOIC
D
16
2500
CD4053BM96G4
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CD4053BME4
ACTIVE
SOIC
D
16
40
CD4053BMG4
ACTIVE
SOIC
D
16
CD4053BMT
ACTIVE
SOIC
D
CD4053BMTE4
ACTIVE
SOIC
CD4053BMTG4
ACTIVE
CD4053BNSR
Lead/Ball Finish
MSL Peak Temp (3)
no Sb/Br)
TBD
Call TI
Call TI
CU NIPDAU
Level-1-260C-UNLIM
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
40
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
16
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
D
16
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SOIC
D
16
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4053BNSRE4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4053BNSRG4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4053BPW
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4053BPWE4
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4053BPWG4
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4053BPWR
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4053BPWRE4
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CD4053BPWRG3
PREVIEW
TSSOP
PW
16
2000
CD4053BPWRG4
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
TBD
Call TI
CU NIPDAU
Call TI
Level-1-260C-UNLIM
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com
14-May-2010
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF CD4051B, CD4051B-MIL, CD4052B, CD4052B-MIL, CD4053B, CD4053B-MIL :
• Automotive: CD4051B-Q1, CD4053B-Q1
NOTE: Qualified Version Definitions:
• Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
Addendum-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com
30-Jul-2010
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
CD4051BM96
SOIC
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
8.0
16.0
Q1
D
16
2500
330.0
16.4
6.5
10.3
2.1
W
Pin1
(mm) Quadrant
CD4051BM96
SOIC
D
16
2500
330.0
16.4
6.5
10.3
2.1
8.0
16.0
Q1
CD4051BNSR
SO
NS
16
2000
330.0
16.4
8.2
10.5
2.5
12.0
16.0
Q1
CD4051BPWR
TSSOP
PW
16
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
CD4052BM96
SOIC
D
16
2500
330.0
16.4
6.5
10.3
2.1
8.0
16.0
Q1
CD4052BNSR
SO
NS
16
2000
330.0
16.4
8.2
10.5
2.5
12.0
16.0
Q1
CD4052BPWR
TSSOP
PW
16
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
CD4053BM96
SOIC
D
16
2500
330.0
16.4
6.5
10.3
2.1
8.0
16.0
Q1
CD4053BNSR
SO
NS
16
2000
330.0
16.4
8.2
10.5
2.5
12.0
16.0
Q1
CD4053BPWR
TSSOP
PW
16
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
30-Jul-2010
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
CD4051BM96
SOIC
D
16
2500
346.0
346.0
33.0
CD4051BM96
SOIC
D
16
2500
333.2
345.9
28.6
CD4051BNSR
SO
NS
16
2000
346.0
346.0
33.0
CD4051BPWR
TSSOP
PW
16
2000
346.0
346.0
29.0
CD4052BM96
SOIC
D
16
2500
333.2
345.9
28.6
CD4052BNSR
SO
NS
16
2000
346.0
346.0
33.0
CD4052BPWR
TSSOP
PW
16
2000
346.0
346.0
29.0
CD4053BM96
SOIC
D
16
2500
333.2
345.9
28.6
CD4053BNSR
SO
NS
16
2000
346.0
346.0
33.0
CD4053BPWR
TSSOP
PW
16
2000
346.0
346.0
29.0
Pack Materials-Page 2
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DLP® Products
www.dlp.com
Communications and
Telecom
www.ti.com/communications
DSP
dsp.ti.com
Computers and
Peripherals
www.ti.com/computers
Clocks and Timers
www.ti.com/clocks
Consumer Electronics
www.ti.com/consumer-apps
Interface
interface.ti.com
Energy
www.ti.com/energy
Logic
logic.ti.com
Industrial
www.ti.com/industrial
Power Mgmt
power.ti.com
Medical
www.ti.com/medical
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Space, Avionics &
Defense
www.ti.com/space-avionics-defense
RF/IF and ZigBee® Solutions www.ti.com/lprf
Video and Imaging
www.ti.com/video
Wireless
www.ti.com/wireless-apps
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2010, Texas Instruments Incorporated