High Speed Buffer CORPORATION CLM6121 / CLM6321 FEATURES GENERAL DESCRIPTION • Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200V/µs • Wide Bandwidth. . . . . . . . . . . . . . . . . . . . . . . . . . 100MHz current . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230mA • Output • High Input Impedance . . . . . . . . . . . . . . . . . . . . . . . . 2MΩ • No Oscillations with Capacitive Loads to ±15V Operation Guaranteed • 5V • Current and Thermal Limiting • Fully Specified to Drive 50Ω Lines The CLM6121 family are high speed unity gain buffers that slew at 1200V/µs, having a small signal bandwidth of 100MHz, and capable of providing a continuous output current of ±200mA. They are monolithic ICs which are pin to pin compatible with the LH0002H/CH with the additional feature of current limiting. The internal output short circuit current limiting feature has been designed in the device such that when the junction temperature reaches 170oC, the current is limited to 100mA. APPLICATIONS ORDERING INFORMATION Driving • Line • Radar • Sonar Part Package CLM6121 H CLM6321 H CLM6121 N CLM6321 N CLM6121 M CLM6321 M Hermetic TO5 8 Lead Hermetic TO5 8 Lead Plastic P Dip 8 Lead Plastic P Dip 8 Lead SOIC 8 Lead SOIC 8 Lead Temperature Range -55oC to 125oC -40oC to 85oC -40oC to 85oC -40oC to 85oC -25oC to 70oC -25oC to 70oC CONNECTION DIAGRAMS Plastic DIP *VVIN N/C *V- Metal Can 1 8 2 7 3 6 4 5 VIN V-* VOUT Plastic SO V1+ V1- 8 1 VIN 7 V+ V-* V2+ 2 6 V23 N/C *Heat-sinking pins. Pin 1 and Pin 8 must be connected to the negative supply. 1 8 2 7 3 6 4 5 V-* VOUT V+ V-* N/C VOUT Top View Package NO8A N/C *V- 5 4 *V- Package HO8A *Heat-sinking pins. Pin 1 and Pin 8 must be connected to the negative supply. Package MO8A CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-1076 CLM6121 / CLM6321 CORPORATION ABSOLUTE MAXIMUM RATINGS (Note 1) If Military/Aerospace specified devices are required, please contact the Calogic Sales Office for availability and specifications. Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±Vsupply Short Circuit to GND (Note 2) . . . . . . . . . . . . . . . . Continuous Storage Temperature Range . . . . . . . . . . . . -65oC to +150oC Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . 260oC ESD Tolerance (Note 4). . . . . . . . . . . . . . . . . . . . . . . Thermal Resistance (θJA) (Note 7) H Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thermal Resistance (θJC) H Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±2000V 125oC/W 50oC/W 60oC/W 15oC/W DC ELECTRICAL CHARACTERISTICS The following specifications apply for Supply Voltage = ±15V, VCM = 0, RL ≥ 100kΩ and RS = 50Ω unless otherwise noted. Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25oC. SYMBOL CHARACTERISTICS TYP CLM6121 CLM6321 Limit (Note 6) Limit (Note 6) UNITS CONDITIONS AV1 Voltage Gain 1 0.990 0.980 0.970 0.970 0.950 AV2 Voltage Gain 2 0.900 0.860 0.800 0.850 0.820 AV3 Voltage Gain 3 0.840 0.780 0.750 0.750 0.700 VOS Offset Voltage 15 30 50 50 100 mV Max RL = 1kΩ IB Input Bias Current 1 4 7 5 7 µA Max RL = 1kΩ, RS = 10kΩ, RIN Input Resistance 5 MΩ CIN Input Capacitance 3.5 pF RO Output Resistance 3 5 10 5 6 IS1 Supply Current 1 15 18 20 20 22 RL = 1kΩ, VIN = ±10V V/V Min RL = 50Ω, VIN = ±10V RL = 50Ω, V+ = 5V VIN = 2VPP Ω Max RL = 50Ω IOUT = ±10mA RL = ∞ mA Max 14 16 18 18 20 Output Swing 1 13.5 13.3 13 13.2 13 VO2 Output Swing 2 12.7 11.5 10 11 10 VO3 Output Swing 3 12 11 9 10 9 VO4 Output Swing 4 1.8 1.6 1.3 1.6 1.5 VPP Min RL = 50Ω, V+ = 5V (Note 6) PSSR Power Supply Rejection Ratio 70 60 55 60 50 dB Min V± = ±5V to ±15V IS2 Supply Current 2 VO1 RL = ∞, V+ = 5V RL = 1k ±V Min RL = 100Ω RL = 50Ω CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-1076 CLM6121 / CLM6321 CORPORATION AC ELECTRICAL CHARACTERISTICS The following specifications apply for Supply Voltage = ±15V, VCM = 0, RL ≥ 100kΩ and RS = 50Ω unless otherwise noted. Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25oC. CLM6121 SYMBOL CHARACTERISTICS CLM6321 TYP UNITS CONDITIONS Limit (Note 6) Limit (Note 6) SR1 Slew Rate 1 1200 550 550 V/µs VIN = ±11V, RL = 1kΩ SR2 Slew Rate 2 800 550 550 V/µs VIN = ±5V, RL = 50Ω (Note 3) SR3 Slew Rate 3 650 550 550 V/µs VIN = 2 VPP, RL = 50Ω V+ = 5V BW -3 dB Bandwidth 50 30 30 MHz VIN = ±100 mVPP, RL = 50Ω CL ≤ 10pF t r, t f Rise Time Fall Time 7.0 ns RL = 50Ω, CL ≤ 10pF VO = 100mVPP t pd Propagation Delay Time 4.0 ns RL = 50Ω, CL ≤ 10pF VO = 100mVPP OS Overshoot 10 % RL = 50Ω, CL ≤ 10pF VO = 100mVPP Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not apply when operating the device beyond its rated operating conditions. Note 2: The CLM6121 series buffers contain current limit and thermal shutdown to protect against fault conditions. Note 3: Slew rate is measured with a ±11V input pulse and 50Ω source impedance at 25 oC. For accurate measurements, the input slew rate should be at least 1700V/µs. Note 4: The test circuit consists of the human body model of 120pF in series with 1500Ω. Note 5: The maximum power dissipation is a function of T J(max), θJA and TA. The maximum allowable power dissipation at any ambient temperature is PD = (T J(max) - TA)/θJA. Note 6: Limits are guaranteed by testing, correlation or periodic characterization. Note 7: For M & N package, θJA is measured by soldering the unit directly on a printed circuit board and V - pins are connected to 2 square inches of 2 oz copper. CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-1076 CLM6121 / CLM6321 PSSR vs Frequency Rise Time vs Temperature 10 +60 VS = ±15V VRIPPLE = 100mV R S = R L = 50Ω +50 TJ = 25˚C +70 POSITIVE SUPPLY +40 NEGATIVE SUPPLY 4 2 0 1M VS = ±5V 10M VS = ±15V f = 1MHz 100M -25 500 R L = 50Ω 0 25 75 125 175 0 ±5 ±10 ±15 FREQUENCY (Hz) TEMPERATURE (˚C) SUPPLY VOLTAGE (±V) Slew Rate vs Temperature Slew Rate vs Capacitive Load Output Resistance vs Supply Voltage R L = 1k VIN = ±10V SLEW RATE (V/µs) R L = 50Ω VIN = ±5V 500 250 750 500 R L = 50Ω VIN = ±5V 250 -25 VS = ±15V TJ = 25˚C R L = 1k VIN = ±10V SR = VS = ±15V 0 25 75 0 10 125 200mA CL IOUT AC = 1mA IOUT DC = 0 40 30 TJ = +125˚C 20 TJ = +25˚C 10 TJ = -55˚C 0 40 400 1000 2000 100 0 ±5 ±10 ±15 JUNCTION TEMPERATURE (˚C) CAPACITIVE LOAD (pF) SUPPLY VOLTAGE (±V) Output Impedance vs Frequency Supply Current vs Supply Voltage Input Current vs Supply Voltage 1000 20 VS = ±15V TJ = 25˚C IOUT AC = 100µA 10 R S = 50Ω SUPPLY CURRENT (mA) R S = 100k 14 TJ = -55˚C 12 10 8 TJ = +25˚C 6 4 TJ = +125˚C 10M 100M +30 +20 TJ = +125˚C +10 0 -10 TJ = +25˚C -20 -30 -40 0 1M VIN = 0V +40 16 2 FREQUENCY (Hz) ±20 +50 IOUT = 0mA 18 100 ±20 50 1000 750 1 100k R L = 1k 750 250 VOUT = 100mVpp 1250 1000 SLEW RATE (V/µs) 6 0 1250 OUTPUT IMPEDANCE (Ω) 1000 R L = 50Ω R L = 1k +10 100k TJ = 25˚C OUTPUT RESISTANCE (Ω) +20 1250 VS = ±5V VS = ±15V INPUT CURRENT (µA) +30 8 Slew Rate vs Supply Voltage SLEW RATE (V/µs) +80 RISE TIME (ns) POWER SUPPLY REJECTION RATIO (dB) CORPORATION TJ = -55˚C -50 0 ±5 ±10 ±15 SUPPLY VOLTAGE (V) ±20 0 ±5 ±10 ±15 ±20 SUPPLY VOLTAGE (V) CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-1076 CLM6121 / CLM6321 CORPORATION Voltage Gain vs Frequency Input Resistance vs Temperature 25 VS = ±15V VIN = ±12V R L = 100Ω VOLTAGE GAIN (dB) INPUT RESISTANCE (MΩ) 20 10 4.0 2.0 1.0 0.4 15 10 0.1 R L > 1k 0 -5 -10 R L = 50Ω R L = 10Ω -20 -25 -25 25 75 125 175 1 4 JUNCTION TEMPERATURE (˚C) Voltage Gain vs Frequency 50Ω Resistive Load Different Capacitive Loads 10 40 10 CL = 1000pF CL = 500pF CL = 100pF 0 -5 -10 -15 CL = 0.01µF 10 40 -10 VS = ±15V -15 R L = 10MΩ T = 25˚C -20 J VO < 100mV -25 1 4 -20 R L = 10Ω -40 R L = 50Ω -50 VS = ±15V R S = 50Ω TJ = 25˚C VO < 100mV -60 -70 1 100 200 4 FREQUENCY (MHz) 40 100 200 -20 -30 40 100 200 FREQUENCY (MHz) R S = 1k -40 R S = 10k -50 -60 -70 -80 10 R S = 50Ω -10 -10 -30 10 Different Source Resisters 0 -90 4 0 -5 Phase Shift vs Frequency RL = ∞ -80 -25 1 5 Phase Shift vs Frequency 0 5 -20 CL = 1000pF 10 FREQUENCY (MHz) PHASE SHIFT (DEGREES) 15 15 Different Resistive Loads PHASE SHIFT (DEGREES) VOLTAGE GAIN (dB) 20 100 200 CL = 100pF CL = 500pF FREQUENCY (MHz) 25 VS = ±15V R L = 50Ω TJ = 25˚C VO < 100mV CL = 0.01µF 20 5 -15 0.2 R L = 100Ω VS = ±15V CL < 10pF TJ = 25˚C VO = 100mV 20 No Resistive Load Different Capacitive Loads 25 VOLTAGE GAIN (dB) 100 40 Voltage Gain vs Frequency Different Resistive Loads Fixed Capacitive Load VS = ±15V R L = 50Ω TJ = 25˚C VO < 100mV -90 100k 1M 10M 100M FREQUENCY (Hz) Small Signal Bandwidth vs Supply Voltage -3 dB BANDWIDTH (MHz) 200 150 VIN = 100mV R L = 50Ω R S = 50Ω TJ = -55˚C TJ = +25˚C 100 TJ = +125˚C 50 0 0 ±5 ±10 ±15 ±20 SUPPLY VOLTAGE (±V) CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-1076