Radial & Axial Multi Layer Ceramic Capacitors Radial & Axial Characteristic No. Item Temperature Compensating Type 14 Capacitance Capacitance Temperature Change Characteristics Temperature Coefficient Char. Temp. Range Test Methods and Conditions High Dielectric Constant Type Char. Temp. Range X7R -55 to +125℃ X5R -55 to +85℃ Y5V -30 to +85℃ Reference Temp. Cap. Change Within ±15% 25℃ Temperature Coefficient -55 to C0G ±30ppm/℃ +125℃ Within ±15% Within 22% -82% (1) Temperature Compensating Type: The temperature coefficient is determined using the capacitance measured in step 3 as a reference, When cycling the temperature sequentially from step 1 through 5, (C0G: +25 to 125℃) the capacitance shall be with in the specified tolerance for the temperature coefficient. The capacitance drift is calculated by dividing the difference between the maximum measured values in the step 1, 3 and 5 by the Cap. value in step 3 Step Temperature(℃) 1 25±2 2 -55±3 3 25±2 4 125±3(for C0G) 5 25±2 Features This widely used ceramic capacitors includes both monolithic and multilayer types to provide a wide capacitance range of 1pF through 1㎌ in respectly one standard size and shape(Radial & Axial). Applications The class1 temperature compensating(C0G) products can be used in circuits to stabilize frequency and temperature characteristics. The X7R, Z5U, Y5V dielectrics are optimum for by pass capacitors. Shape and Dimensions Bulk Type Radial Type (2) High Dielectric Constant Type : The ranges of capacitance change compared with the 25℃ value over the temperature range shown in the table shall be in the specified range. CODE 051B 077B 15 16 Preservation(keeping) ※When solderability is considered, capacitors are recommended to be used in 12 months The regulation of environmental pollution materials. L Max. W Max. 5.5 5.5 7.7 7.6 T Max. H Max. P ±0.7 Ød Color Marking 5 0.5 Orange or Gold Ex) 104 6.4 3.2 9.2 (1) Temperature : 25℃ ±10℃ (2) Relative Humidity : Below 70% RH ※Never use materials mentioned below in MLCC products regulated this document. Pb, Cd, Hg, Cr+6, PBB(polybromide biphenyl), PBDE(polybrominated diphenyl ethers), asbestos. - In case of high Voltage and thin layer type Capacitor, it can be different from nomal specification. So Please ask to our sales person. Flat Type Radial Type Axial Type www.samwha.com 24 SAMWHA CAPACITOR Co., Ltd. Multi Layer Ceramic Capacitors 25 Radial & Axial Multi Layer Ceramic Capacitors Code Dimensions Tolerance Code Dimensions Tolerance Code Dimensions Tolerance D(Ø) 4 ±0.3 P1 3.85 ±0.7 F 64.8 -0, +2 H 16 ±0.5 P2 6.35 ±1.3 G H1 9 +0.76, -0.5 T 0.9 Max. H =J ±1.2 H2 0 ±2 W1 18 ±0.5 J =H ±1.2 L 11 Max. W2 0 +0.6 Max. K 0.8 Max. L1 1.5 Max. S 5 ±0.7 N 5 ±0.4 P 12.7 ±0.3 R 3.2 Min. No adhesive may be exposed Capacitance Tolerance Code 50.8~53.3 Code Tolerance Remark J ± 5.0 % C0G K ±10 % X7R, C0G M ± 20 % Z5U, X7R Z +80, -20% Z5U, Y5V Rated Voltage Code Code 250 500 101 Volt DC 25V DC 50V DC 100V Code B R F Packing Bulk Reel Pack Flat Pack How to Order(Product Identification) Packing Code CA 2633 Y5V 104 Z 500 F Reliability and Test Conditions Dimension Code Type Characteristic CR : Radial Lead Type The number shows the maximum length of "L" by 1/10 in millimeter, and the CA : Axial Lead Type alphabet means lead difference.(Refer to above diagram) Temperature Coefficient Code Temperature Characteristice Temperature Range Capacitance Change or Temperature Coefficient C0G -55 to 125℃ 0±30ppm/℃ X7R -55 to 125℃ ±15% Z5U 10℃ to 85℃ +22, -56% Y5V -30 to 85℃ +22, -82% Item Temperature Compensating Type 1. Operating Temperature Range C0G : -55 to +125℃ 2. Insulation Resistance More than 10,000MΩ or 500Ω.F(whichever is smaller) Applied the rated voltage for 2 minute 3. Dielectric Strength No detects or abnormalities - C0G : The rated voltage×300% - X7R, Z5U, Y5V : 〃 ×250% 4. Capacitance Within the specified tolerance Temperature Compensating Type 5. Dissipation Factor 30㎊ Min. : Q≥1,000(DF≤0.1%) Char. 50V Min. 25V X7R ≤3% 30㎊ Max. : Q≥400+20C (DF≤1/(400+20C)) Z%V ≤4.0% - ≤5% (<220㎋) Y5V ≤7% (≥220㎋) ≤ 7% Capacitance Code(Pico Farads) First two digits are significant ; third digit denotes number of zeros. High Dielectric Constant Type X7R : -55 to +125℃ Z5U : +10 to +85℃ Y5V : -30 to 85℃ ≤2.5% 16V 10V 6. www.samwha.com SAMWHA CAPACITOR Co., Ltd. Terminal Strength Testing Frequency Testing Voltage C0G (C≤1000pF) 1±0.1M㎐ 0.5 to 5V rms C0G (C >1000pF) 1±0.1k㎐ 1±0.2V rms X7R, Z5U, Y5V (C≤10㎌ 10V Min.) 1±0.1k㎐ 1±0.2V rms Cap. ≤3.5% ≤5.0% - - ≤9% (<220㎋) ≤12.5% ≤12.5% (≥220㎋) Ex.) 101 = 100㎊, 1R5 = 1.5㎊, 103 = 10,000㎊ 26 Test Methods and Conditions No. No evidence of damage to body of device of looseness of terminals. A static load of 10N(1kgf) : applied to one terminal in the axial direction and acting in a direction away from the body for 1 to 5 secs. Multi Layer Ceramic Capacitors 27 Radial & Axial Multi Layer Ceramic Capacitors Characteristic Item No. 7. Resistance Appearance to Capacitance Soldering Change Heat Dissipation Factor(or Q) I.R. 8. Temperature Appearance Cycle Capacitance Change Dissipation Factor(or Q) 9. Humidity Load Within ±2.5% or ±0.25pF X7R : ≤± 7.5% (whichever is larger) Z5U, Y5V : ≤± 20% 30㎊ Min. : Q≥1,000 (DF≤0.1%) Char. 50V Min. 25V X7R ≤ 2.5% ≤3% 30㎊ Max. : Q≥400+20C (DF≤1/(400+20C)) Z5U ≤4.0% 16V 10V ≤3.5% ≤5.0% - - - Immersion Time : 5±0.5sec - Take it out and set it for 24±2 hours(temperature compensating type)or 48±4hours(high dielectric constant type) then measure. No. Item 10 Dissipation High Temperature Factor(or Q) Load No marking defects Char. 50V Min. 25V Step X7R ≤ 2.5% ≤3% 30㎊ Max. : Q≥400+20C (DF≤1/(400+20C)) Z5U ≤4.0% - 16V 10V ≤3.5% ≤5.0% - - ≤9% ≤5% (<220㎋) (<220㎋) Y5V ≤7% ≤7% ≤12.5% ≤12.5% (≥220㎋) (≥220㎋) No marking defects Capacitance Change Within ±7.5% or±0.75㎊ (whichever is larger) 10㎊≤Cp≤30㎊: Q≥275+5/2C (DF≤1/(275+5/2C)) 1 2 3 4 Capacitance Capacitance Temperature Change Characteristics Min. Max. Temp. Operating Room Operating Room (℃) Temp. Temp. Temp. Temp. +0, -3 +3, -0 Time (min) 30±3 2 to 3 30±3 2 to 3 Char. 50V Min. 25V 16V 10V X7R ≤5% ≤5% ≤5% ≤5% Z5U ≤4.0% - - - Y5V ≤7.5% ≤10% (<1㎌) ≤12.5% ≤15% ≤7% (≥1㎌) Char. Temp. Range X7R -55 to +125℃ Z5U -10 to +85℃ Y5V Reference Temp. -30 to +85℃ Cap. Change Within ±15% 25℃ Within +22% -56% Within +22% -82% Take it out and set it for 24±2 hours [tempeature compensating or 48±4 hours(high dielectric Type) at room temperature, than measure. Take it out and set it for 24±2 hours (temperature compensatig) or 48±4 hours(high dielectric constant type) at room temperature, then measure. The charge/discharge current is less than 50mA. (1) Temperature Compensating Type : The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from step 1 through 5. (SL: +25 to 85℃) the capacitance shall be with in the specified tolerance for the temperature coefficient. The capacitance drift is calculated dividing the difference between the maximum measured values in the step 1, 3 and 5 by Cap, value in step 3. Step Temperature Coefficient Char. C0G - Temperature : 40±2℃ Temp. Range Temperature Coefficient -55 to ±30ppm/℃ +125℃ - Humidity : 90~95%RH X7R : Within ±12.5% Z5U : Within ±30% Y5V : Within + 30%, -40% (Y5V/1.0μF, 2.2μF, 4.7μF/10V) Within ±30% (others) Test Methods and Conditions High Dielectric Constant Type More than 1000MΩ or 50ΩF(Whichever is smaller) I.R. 11 Within±2.5% or ±0.25pF X7R : Within + 7.5% Z5U, Y5V : Within ± 20% 30㎊ Min. : Q≥350 (DF≤0.3%) 10㎊ Max. : Q≥200+10C (DF≤1/(200+10C)) More than 10,000MΩ or 500Ω.F (whichever & smaller) 30㎊ Min. : Q≥1,000 (DF≤0.1%) Temperature Compensating Type - ≤9% ≤5% (<220㎋) (<220㎋) Y5V ≤7% ≤7% ≤12.5% ≤12.5% (≥220㎋) (≥220㎋) Appearance www.samwha.com 10. High Appearance Temperature Capacitance Load change Characteristic - Soldering Temp : 260±5℃ No marked defect More than 10,000MΩ or 500Ω.F (Whichever is smaller) I.R. Test Methods and Conditions High Dielectric Constant Type I.R. Dissipation Factor(or Q) 28 Temperature Compensating Type Temperature(℃) 1 25±2 2 -55±3 3 25±2 4 125±3(for C0G) 5 25±2 - Hour : 500±12hrs 30㎊ Min. : Q≥200 (DF≤0.5%) Char. 50V Min. 25V 16V 10V X7R ≤5% ≤5% ≤5% ≤5% 30㎊ Max. : Q≥100+10/3C (DF≤1/(100+10/3C)) Z5U ≤4.0% - - - Y5V ≤10% (<1 ㎌) ≤7.5% ≤12.5% ≤12.5% ≤15% (≥1 ㎌) - Test Voltage : Tge rated voltage - Take it out and set it for 24±2 hours (temperature compensatig) or 48±4 hours(high dielectric constant type) at room temperature, then measure. The charge/discharge current is less than 50mA. (2) High Dielectric Constant Type : The ranges of capacitance change compared with the 25℃ value over the temperature range shown in the table shall be in the specified range. 12 The regulation of environmental pollution materials ※Never use materials mentioned below in leaded MLCC products regulated this document. Pb, Cd, Hg, Cr+6, PBB(polybromida biphenyl), PBDE(polybrominated diphenyl ethers), asbestos. 13 The regulation about destructive materials of the ozone layer Never use the ODS(ozone depleting substance) materials below in leaded MLCC products regulated this document. More than 500MΩ or 25Ω.F(whichever is smaller) No marked defect Within ±3% or±0.3㎊ (whichever is larger) SAMWHA CAPACITOR Co., Ltd. - Testing Time : 1000±12hrs X7R : Within ±12.5% , Z5U : Within ±30% Y5V : Within ±30%(Cap. < 1.0μF) Within +30% , -40%(Cap. ≥ 1.0μF) - Applied Voltage : Rated Voltage×200% - Temperature : C0G, X7R → 125±3℃ Z5U, Y5V → 85±3℃ Packing Quantity Unit : pcs Radial Type Axial Type Inner Box Outer Box Remark Inner Box Outer Box Remark 2,500 15,000 Packing set on the basis of flat tapping 5,000 50,000 Packing set on the basis of flat tapping Multi Layer Ceramic Capacitors 29 Multi Layer Ceramic Capacitors Capacitance Range Type Char. Cap(pF) Volt C0G 50 100 Radial X7R 50 100 Z5U 50 Y5V 16 50 C0G 50 Axial X7R Z5U 50 50 Y5V 50 1 2 3 4 5 6 7 8 9 10 12 15 Chip Beads & Inductors 16 18 20 22 24 27 Chip Ferrite Beads 32 Chip Ferrite Beads Arrays 51 Chip Ferrite Inductors 54 Chip Power Inductors 58 30 33 36 39 43 47 51 56 62 68 75 82 91 100 120 150 180 220 270 330 390 470 560 680 820 1.000 1.200 1.500 1.800 2.200 2.700 3.300 3.900 4.700 5.600 6.800 8.200 10.000 15.000 22.000 33.000 47.000 68.000 100.000 www.samwha.com 150.000 220.000 330.000 470.000 680.000 1.000.000 30 SAMWHA CAPACITOR Co., Ltd.