Not for New Design 139 CLL www.vishay.com Vishay BCcomponents Aluminum Capacitors SMD (Chip) Long Life FEATURES • Useful life: 2000 h at 105 °C • Flexible terminals, reflow and wave solderable • Compact, rectangular shape • Charge and discharge proof, no peak current limitation • Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing • Extended voltage and capacitance range 085 CS 85 °C 139 CLL • SMD-version, fully moulded, insulated • Supplied in blister tape on reel Fig. 1 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) Rated capacitance range, CR VALUE APPLICATIONS 14.3 x 6.2 x 6.9 and 14.3 x 7.6 x 8.2 • SMD technology • Industrial and professional applications 1.0 μF to 220 μF Tolerance on CR • Telecommunications, automotive, EDP general industrial ± 20 % Rated voltage range, UR • Coupling, decoupling, smoothing, filtering, buffering, timing 6.3 V to 100 V Category temperature range - 55 °C to + 105 °C Endurance test at 105 °C 1000 h Useful life at 105 °C 2000 h Useful life at 40 °C; 1.3 x lR applied 200 000 h MARKING • Rated capacitance (in μF) • Rated voltage (in V) • Date code in accordance with IEC 60062 Shelf life at 0 V, 105 °C 500 h Resistance to soldering heat test Immersion in solder: 10 s at 260 °C or 40 s at 215 °C Based on sectional specification • Name of manufacturer • “-” sign indicating the cathode. The anode is identified by bevelled edges IEC 60384-18/CECC 32300 Climatic category IEC 60068 • Series number (139) 55/105/56 SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) CR (μF) UR (V) 6.3 10 16 25 40 50 63 100 1.0 - - - - - - - 14.3 x 6.2 x 6.9 2.2 - - - - - - 14.3 x 6.2 x 6.9 14.3 x 6.2 x 6.9 3.3 - - - - - - 14.3 x 6.2 x 6.9 14.3 x 7.6 x 8.2 4.7 - - - - - - 14.3 x 6.2 x 6.9 14.3 x 7.6 x 8.2 10 - - - 14.3 x 6.2 x 6.9 - 14.3 x 6.2 x 6.9 14.3 x 7.6 x 8.2 - 15 - - - - 14.3 x 6.2 x 6.9 14.3 x 7.6 x 8.2 - - 22 - - - 14.3 x 6.2 x 6.9 - 14.3 x 7.6 x 8.2 - - 33 - - - 14.3 x 6.2 x 6.9 14.3 x 7.6 x 8.2 - - - Revision: 11-Feb-13 Document Number: 28301 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design 139 CLL www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) UR (V) CR (μF) 6.3 10 16 25 40 50 63 100 47 - - 14.3 x 6.2 x 6.9 14.3 x 7.6 x 8.2 - - - - 68 - 14.3 x 6.2 x 6.9 - - - - - - 100 14.3 x 6.2 x 6.9 - 14.3 x 7.6 x 8.2 - - - - - 150 - 14.3 x 7.6 x 8.2 - - - - - - 220 14.3 x 7.6 x 8.2 - - - - - - - DIMENSIONS in millimeters O H 0.05 2 + 0.5 0 0.07 + 0.05 − 0.1 0 + 0.05 0 2− R 0.3 S ± 0.3 G W L Fig. 2 - Dimensional outline Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE LxWxH CASE CODE Lmax. Wmax. Hmax. Omax. S Gmax. Rmin. MASS (g) PACKAGING QUANTITIES PER REEL 14.3 x 6.2 x 6.9 2 14.5 6.3 7.05 13.0 2.15 7.5 4.7 0.95 700 14.3 x 7.6 x 8.2 3 14.5 7.7 8.35 13.0 2.85 7.5 4.7 1.3 700 Note • For detailed tape dimensions please see www.vishay.com/doc?28359 Revision: 11-Feb-13 Document Number: 28301 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design 139 CLL www.vishay.com Vishay BCcomponents Table 2 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters (placement accuracy ± 0.25 mm) FOR REFLOW SOLDERING FOR WAVE SOLDERING NOMINAL CASE SIZE LxWxH A B C D E F G A B C D E F G 14.3 x 6.2 x 6.9 15.8 8.8 3.5 2.8 8.0 16.2 7.7 18.6 10.0 4.3 5.0 8.8 20.5 11.5 14.3 x 7.6 x 8.2 15.8 8.8 3.5 2.8 8.0 16.2 9.1 18.6 10.0 4.3 6.0 8.8 21.5 13.0 MOUNTING The capacitors are designed for automatic placement on to printed-circuit boards or hybrid circuits. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print lay-out and/or adjacent components. For recommended soldering pad dimensions, refer to Fig. 3 and Table 2. E E D D G C B G B C A A F F Reflow soldering Solder land/ solder paste pattern Wave soldering Solder resist pattern Occupied area Tracks or dummy tracks Fig. 3 - Recommended pad dimensions for reflow and wave soldering SOLDERING Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the soldering pad during processing. For maximum conditions of different soldering methods see Fig. 4, 5 and 6. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. AS A GENERAL PRINCIPLE, TEMPERATURE AND DURATION SHALL BE THE MINIMUM NECESSARY REQUIRED TO ENSURE GOOD SOLDERING CONNECTIONS. HOWEVER, THE SPECIFIED MAXIMUM CURVES SHOULD NEVER BE EXCEEDED. Revision: 11-Feb-13 Table 3 CURING CONDITIONS FOR SMD-GLUE MAX. Tamb (°C) MAX. EXPOSURE TIME (min) 125 30 140 10 150 5 160 2 160 2 Document Number: 28301 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design 139 CLL www.vishay.com Vishay BCcomponents 280 TPad (°C) 260 280 TPad (°C) 260 240 240 220 220 200 200 180 180 160 160 140 140 120 120 100 100 80 80 0 50 100 150 200 f(s) 0 250 Fig. 4 - Maximum temperature load during infrared reflow soldering 50 100 150 200 f(s) 250 Fig. 5 - Maximum temperature load during vapor phase reflow soldering 280 TPad (°C) 260 240 220 200 180 160 140 120 100 80 0 50 100 150 200 f(s) 250 Fig. 6 - Maximum temperature load during (double-) wave soldering ORDERING EXAMPLE ELECTRICAL DATA SYMBOL DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % IR Rated RMS ripple current at 100 Hz,105 °C IL5 tan Z Max. leakage current after 5 min at UR Max. dissipation factor at 100 Hz Max. impedance at 10 kHz Electrolytic capacitor 139 series 100 μF/16 V; ± 20 % Nominal case size: 14.3 mm x 7.6 mm x 8.2 mm; taped on reel Ordering code: MAL213965101E3 Former 12NC: 2222 139 65101 Note • Unless otherwise specified, all electrical values in Table 4 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Revision: 11-Feb-13 Document Number: 28301 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design 139 CLL www.vishay.com Vishay BCcomponents Table 4 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) IR 100 Hz 105 °C (mA) CR 100 Hz (μF) NOMINAL CASE SIZE LxWxH (mm) 100 14.3 x 6.2 x 6.9 79 4.3 220 14.3 x 7.6 x 8.2 120 5.8 68 14.3 x 6.2 x 6.9 71 4.4 150 14.3 x 7.6 x 8.2 110 47 14.3 x 6.2 x 6.9 66 100 14.3 x 7.6 x 8.2 10 14.3 x 6.2 x 6.9 22 6.3 10 16 25 40 50 63 100 IL5 5 min (μA) Z 10 kHz () ORDERING CODE MAL2139....... 0.24 3.0 63101E3 0.24 1.4 63221E3 0.20 2.9 64689E3 6.0 0.20 1.3 64151E3 4.5 0.16 3.4 65479E3 100 6.2 0.16 1.6 65101E3 40 3.5 0.09 12 66109E3 14.3 x 6.2 x 6.9 48 4.1 0.14 5.5 66229E3 33 14.3 x 6.2 x 6.9 59 4.7 0.14 3.7 66339E3 47 14.3 x 7.6 x 8.2 79 5.4 0.14 2.6 66479E3 15 14.3 x 6.2 x 6.9 45 4.2 0.11 6 67159E3 33 14.3 x 7.6 x 8.2 75 5.6 0.11 2.7 67339E3 10 14.3 x 6.2 x 6.9 40 4.0 0.09 7 61109E3 15 14.3 x 7.6 x 8.2 56 4.5 0.09 4.7 61159E3 22 14.3 x 7.6 x 8.2 67 5.2 0.09 3.2 61229E3 2.2 14.3 x 6.2 x 6.9 19 3.3 0.09 25 68228E3 3.3 14.3 x 6.2 x 6.9 23 3.4 0.09 21 68338E3 4.7 14.3 x 6.2 x 6.9 28 3.6 0.09 17 68478E3 10 14.3 x 7.6 x 8.2 48 4.3 0.08 8 68109E3 1.0 14.3 x 6.2 x 6.9 12 3.2 0.09 55 69108E3 2.2 14.3 x 6.2 x 6.9 19 3.4 0.09 29 69228E3 3.3 14.3 x 7.6 x 8.2 27 3.7 0.08 17 69338E3 4.7 14.3 x 7.6 x 8.2 33 3.9 0.08 11 69478E3 tan 100 Hz ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Us 1.15 x UR Surge voltage for short periods Urev 1 V Reverse voltage Current Leakage current After 1 min at UR IL1 0.02 CR x UR + 3 μA After 5 min at UR IL5 0.002 CR x UR + 3 μA Nominal case size 14.3 mm x 6.2 mm x 6.9 mm Typ. 18 nH Nominal case size 14.3 mm x 7.6 mm x 8.2 mm Typ. 28 nH Calculated from tan max. and CR (see Table 4) ESR = tan /2 fCR Inductance Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) Revision: 11-Feb-13 Document Number: 28301 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design 139 CLL www.vishay.com Vishay BCcomponents CAPACITANCE 1.2 C C0 1.1 1 2 1.0 C C0 3,4,5 1.0 5 4 0.9 3 0.9 0.8 0.7 0.6 0.8 5 4 Curve 1: 6.3 V Curve 2: 10 V Curve 3: 16 V Curve 4: 25 V Curve 5: 40 V to 100 V 3 1,2 - 60 - 40 - 20 0 20 40 2 Curve 1: 6.3 V Curve 2: 10 V Curve 3: 16 V Curve 4: 25 V Curve 5: 40 V to 100 V 0.7 60 80 Tamb (20 °C) 1 102 10 103 f (Hz) 104 C0 = Capacitance at 20 °C, 100 Hz C0 = Capacitance at 20 °C, 100 Hz Fig. 7 - Typical multiplier of capacitance as a function of ambient temperature Fig. 8 - Typical multiplier of capacitance as a function of frequency RIPPLE CURRENT AND USEFUL LIFE CCC206 3.8 3.7 IA IR 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 Lifetime multiplier 2.6 0 1. 2.4 5 1. 0 2. 2.2 0 3. 0 4. 2.0 0 6. 0 8. 1.8 12 1.6 20 30 60 (1) (1) 0 10 0 15 0 20 IA = Actual ripple current at 100 Hz IR = Actual ripple current at 100 Hz, 105 °C 1.4 1.2 1.0 0.8 0.5 0.0 40 50 60 70 80 90 Useful life at 105 °C and IR applied: 2000 h 100 110 Tamb (°C) Fig. 9 - Multiplier of useful life as a function of ambient temperature and ripple currrent load Revision: 11-Feb-13 Document Number: 28301 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design 139 CLL www.vishay.com Vishay BCcomponents MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) UR = 6.3 V TO 16 V UR = 25 V TO 50 V UR = 63 V TO 100 V 50 0.95 0.90 0.85 100 1.00 1.00 1.00 300 1.07 1.12 1.20 1000 1.12 1.20 1.30 3000 1.15 1.25 1.35 10 000 1.20 1.30 1.40 Table 5 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE Mounting IEC 60384-18, subclause 4.3 Endurance IEC 60384-18/ CECC 32300, subclause 4.15 PROCEDURE (quick reference) REQUIREMENTS Shall be performed prior to tests mentioned below; reflow or (double-) wave soldering; for maximum temperature load refer to chapter “Mounting” C/C: ± 5 % tan spec. limit IL5 spec. limit Tamb = 105 °C; UR applied; 1000 h UR 6.3 V C/C: + 15 %/- 30 % UR 10 V C/C: ± 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301, subclause 1.8.1 Tamb = 105 °C; UR and IR applied; 2000 h UR 6.3 V C/C: + 45 %/- 50 % UR 10 V C/C: ± 45 % tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short or open circuit total failure percentage: 1 % Shelf life (storage at high temperature) IEC 60384-18/ CECC 32300, subclause 4.17 Tamb = 105 °C; no voltage applied; 500 h after test: UR to be applied for 30 min, 24 h to 48 h before measurement For requirements see “Endurance test” above Revision: 11-Feb-13 Document Number: 28301 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000