VISHAY 048RML_12

048 RML
www.vishay.com
Vishay BCcomponents
Aluminum Capacitors
Radial Miniature Long Life
FEATURES
• Very long useful life: 3000 h to 4000 h at
105 °C
• High reliability
• Miniaturized, high CV-product per unit volume
• Charge and discharge proof
• Polarized aluminum electrolytic capacitors, non-solid
electrolyte
• Radial leads, cylindrical aluminum case with pressure
relief, insulated with a blue sleeve
116 RLL
lower
CV-values
152 RMH
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
high voltage
APPLICATIONS
048 RML
longer life
lower Z
136 RVI
miniaturized
• EDP, telecommunication, industrial, automotive and
audio-video
150 RMI
miniaturized
• Smoothing, filtering, buffering in SMPS, timing
• Portable and mobile equipment (small size, low mass)
148 RUS
Fig. 1
MARKING
The capacitors are marked (where possible) with the
following information:
QUICK REFERENCE DATA
DESCRIPTION
Nominal case sizes (Ø D x L in mm)
Rated capacitance range, CR
Tolerance on CR
Rated voltage range, UR
Category temperature range
Endurance test at 105 °C
Useful life at 105 °C
Case Ø D = 10 mm and 12.5 mm
Case Ø D = 16 mm and 18 mm
Useful life at 40 °C, 1.6 x IR applied
Case Ø D = 10 mm and 12.5 mm
Case Ø D = 16 mm and 18 mm
Shelf life at 0 V, 105 °C
Based on sectional specification
Climatic category IEC 60068
VALUE
10 x 12 to 18 x 35
100 μF to 10 000 μF
± 20 %
6.3 to 63 V
- 40 °C to + 105 °C
2000 h
• Rated capacitance (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Date code, in accordance with IEC 60062
• Code indicating factory of origin
• Name of manufacturer
3000 h
4000 h
• Upper category temperature (105 °C)
• Negative terminal identification
200 000 h
260 000 h
1000 h
IEC 60384-4/EN130300
40/105/56
• Series number (048)
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
100
220
330
470
1000
2200
3300
4700
6800
10 000
UR (V)
6.3
16 x 25
16 x 35
Revision: 05-Oct-12
10
10 x 16
12.5 x 20
12.5 x 25
16 x 25
16 x 31
18 x 35
16
10 x 12
10 x 20
12.5 x 25
16 x 25
16 x 31
16 x 35
18 x 35
25
10 x 16
12.5 x 20
16 x 25
16 x 31
18 x 35
-
35
10 x 12
10 x 20
12.5 x 25
16 x 31
18 x 35
18 x 35
-
40
16 x 35
18 x 35
-
50
10 x 16
12.5 x 20
16 x 25
18 x 35
18 x 35
-
63
10 x 12
10 x 20
12.5 x 20
12.5 x 25
16 x 31
18 x 35
-
Document Number: 28318
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
048 RML
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters AND AVAILABLE FORMS
ØD
ØD
L
L
F
15 min.
+1
4 0
Ød
Ød
5 min.
F
Fig. 2 - Form CA: Longs leads
Fig. 3 - Form CB: Cut leads
Fig. 4 - Form TFA: Taped in box (ammopack)
Table 1
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
ØDxL
CASE
CODE
Ød
Ø Dmax.
Lmax.
F
PACKAGING QUANTITIES
MASS
(g)
FORM CA
FORM CB
FORM TFA
10 x 12
14
0.6
10.5
13.5
5.0 ± 0.5
1.6
1000
500
800
10 x 16
15
0.6
10.5
17.5
5.0 ± 0.5
1.9
500
500
800
10 x 20
16
0.6
10.5
22.0
5.0 ± 0.5
 2.2
500
500
800
12.5 x 20
17
0.6
13.0
22.0
5.0 ± 0.5
4.0
500
500
500
12.5 x 25
18
0.6
13.0
27.0
5.0 ± 0.5
5.0
250
250
500
16 x 25
19
0.8
16.5
27.0
7.5 ± 0.5
 8.0
250
250
250
16 x 31
20
0.8
16.5
33.5
7.5 ± 0.5
 9.0
100
100
250
16 x 35
21
0.8
16.5
37.5
7.5 ± 0.5
 11.5
100
100
-
18 x 35
22
0.8
18.5
37.5
7.5 ± 0.5
 14.5
100
100
-
Note
• For detailed tape dimensions please refer to packaging information: www.vishay.com/doc?28360
Revision: 05-Oct-12
Document Number: 28318
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
048 RML
www.vishay.com
Vishay BCcomponents
ORDERING EXAMPLE
ELECTRICAL DATA
Electrolytic capacitor 048 series
SYMBOL
DESCRIPTION
CR
IR
IL1
tan 
Z
Rated capacitance at 100 Hz, tolerance ± 20 %
Rated RMS ripple current at 100 Hz, 105 °C
Max. leakage current after 1 min at UR
Max. dissipation factor at 100 Hz
Max. impedance at 100 kHz
2200 μF/16 V; ± 20 %
Nominal case size: Ø 12.5 mm x 25 mm; Form TFA
Ordering code: MAL204835222E3
Former 12NC: 2222 048 35222
Note
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
6.3
10
16
25
35
40
50
63
CR
100 Hz
(μF)
DIMENSIONS
ØDxL
(mm)
IR
100 Hz
105 °C
(mA)
IL1
1 min
(μA)
tan 
100 Hz
6800
10 000
1000
2200
3300
4700
6800
10 000
470
1000
2200
3300
4700
6800
10 000
470
1000
2200
3300
4700
220
470
1000
2200
3300
4700
2200
3300
220
470
1000
2200
3300
100
220
330
470
1000
2200
16 x 25
16 x 35
10 x 16
12.5 x 20
12.5 x 25
16 x 25
16 x 31
18 x 35
10 x 12
10 x 20
12.5 x 25
16 x 25
16 x 31
16 x 35
18 x 35
10 x 16
12.5 x 20
16 x 25
16 x 31
18 x 35
10 x 12
10 x 20
12.5 x 25
16 x 31
18 x 35
18 x 35
16 x 35
18 x 35
10 x 16
12.5 x 20
16 x 25
18 x 35
18 x 35
10 x 12
10 x 20
12.5 x 20
12.5 x 25
16 x 31
18 x 35
1350
1700
470
800
1000
1270
1550
1870
360
600
1000
1220
1500
1690
1980
440
720
1120
1450
1720
310
500
900
1340
1600
1950
1500
1600
340
620
1030
1500
1900
240
400
550
700
1150
1600
430
630
100
220
330
470
680
1000
78
160
360
530
760
1100
1600
120
250
550
830
1200
80
170
350
770
1200
1600
880
1300
110
240
500
1100
1700
66
140
210
300
630
1400
0.32
0.40
0.19
0.21
0.23
0.25
0.29
0.37
0.16
0.16
0.18
0.20
0.22
0.26
0.34
0.14
0.14
0.16
0.18
0.20
0.12
0.12
0.12
0.14
0.16
0.18
0.13
0.15
0.10
0.10
0.10
0.12
0.14
0.09
0.09
0.09
0.09
0.09
0.11
Revision: 05-Oct-12
Z
100 kHz
(m)
56
42
180
90
68
56
45
36
250
140
70
56
45
42
34
180
100
56
45
36
280
150
75
45
36
34
45
36
250
110
60
50
40
310
200
120
80
49
45
ORDERING NUMBER MAL2048.......
BULK PACKAGING
TAPED
FORM CA
FORM CB
FORM TFA
53682E3
53103E3
54102E3
54222E3
54332E3
54472E3
54682E3
54103E3
55471E3
55102E3
55222E3
55332E3
55472E3
55682E3
55103E3
56471E3
56102E3
56222E3
56332E3
56472E3
50221E3
50471E3
50102E3
50222E3
50332E3
50472E3
57222E3
57332E3
51221E3
51471E3
51102E3
51222E3
51332E3
58101E3
58221E3
58331E3
58471E3
58102E3
58222E3
63682E3
63103E3
64102E3
64222E3
64332E3
64472E3
64682E3
64103E3
65471E3
65102E3
65222E3
65332E3
65472E3
65682E3
65103E3
66471E3
66102E3
66222E3
66332E3
66472E3
60221E3
60471E3
60102E3
60222E3
60332E3
60472E3
67222E3
67332E3
61221E3
61471E3
61102E3
61222E3
61332E3
68101E3
68221E3
68331E3
68471E3
68102E3
68222E3
33682E3
34102E3
34222E3
34332E3
34472E3
34682E3
35471E3
35102E3
35222E3
35332E3
35472E3
36471E3
36102E3
36222E3
36332E3
30221E3
30471E3
30102E3
30222E3
31221E3
31471E3
31102E3
38101E3
38221E3
38331E3
38471E3
38102E3
-
Document Number: 28318
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
048 RML
www.vishay.com
Vishay BCcomponents
ADDITIONAL ELECTRICAL DATA
PARAMETER
Voltage
Surge voltage
Reverse voltage
Current
CONDITIONS
VALUE
Us  1.15 UR
Urev  1 V
After 1 min at UR
After 5 min at UR
IL1  0.01 CR x UR + 3 μA
IL5  0.002 CR x UR + 3 μA
Case Ø D = 10 mm
Case Ø D  12.5 mm
Typ. 16 nH
Typ. 18 nH
Calculated from tan max. and CR (see Table 2)
ESR = tan /2f CR
Leakage current
Inductance
Equivalent series inductance (ESL)
Resistance
Equivalent series resistance (ESR)
CAPACITANCE (C)
1.2
C
C0
1.2
C
C0
1.0
1
1.1
5
4
3
2
1
2
0.8
1.0
0.6
2
0.4
Curve 1: 10 V
Curve 2: 16 V
Curve 3: 25 V
Curve 4: 50 V
Curve 5: 63 V
0.9
1
Curve 1: 6.3 V
Curve 2: 63 V
0.2
0.8
0
- 60
- 40
- 20
0
20
40
60
80
C0 = Capacitance at 20 °C, 100 Hz
100
120
Tamb (20 °C)
10
102
C0 = Capacitance at 20 °C, 100 Hz
Fig. 5 - Typical multiplier of capacitance
as a function of ambient temperature
103
105
104
f (Hz)
Fig. 6 - Typical multiplier of capacitance
as a function of frequency
EQUIVALENT SERIES RESISTANCE (ESR)
1.2
C
C0
1.0
2.0
ESR
1
2
3
Curve 1: 6.3 V
Curve 2: 16 V
Curve 3: 35 V
Curve 4: 50 V
Curve 5: 63 V
ESR0
1.6
0.8
1.2
0.6
3
2
1
0.8
1
2
3
4
5
0.4
0.4
Curve 1: 10 V; case Ø D = 10 mm
Curve 2: 6.3 V; case Ø D = 16 mm
Curve 3: 63 V; case Ø D = 18 mm
0.2
0
0
- 60
- 40
- 20
0
20
40
60
80
C0 = Capacitance at 20 °C, 100 Hz
Fig. 7 - Typical multiplier of ESR
as a function of ambient temperature
Revision: 05-Oct-12
100
120
Tamb (20 °C)
10
102
103
104
ESR0 = Typical at 20 °C, 100 Hz
105
f (Hz)
Fig. 8 - Typical multiplier of ESR
as a function of frequency
Document Number: 28318
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
048 RML
www.vishay.com
Vishay BCcomponents
IMPEDANCE (Z)
102
102
Curve 1: Case Ø D = 10 mm
Curve 2: Case Ø D = 16 mm
Z
Z0
Curve 1: 470 μF, 16 V; Ø D = 10 x 12 mm
Curve 2: 1000 μF, 10 V; Ø D = 10 x 16 mm
Curve 3: 1000 μF, 16 V; Ø D = 10 x 20 mm
Curve 4: 2200 μF, 16 V; Ø D = 12.5 x 25 mm
Curve 5: 3300 μF, 16 V; Ø D = 16 x 25 mm
Curve 6: 6800 μF, 6.3 V; Ø D = 16 x 25 mm
Z
(Ω)
10
1
10
2
1
1
2
3
4
5
6
1
1
2
10
-1
10
-1
10-2
- 60
- 40
- 20
0
20
40
60
80
Z0 = Typical impedance at 20 °C, 10 kHz
100
120
10
10
104
f (Hz)
105
Tamb (20 °C)
Fig. 10 - Typical impedance as a function of frequency
Curve 1: 220 µF, 35 V; Ø D = 10 x 12 mm
Curve 2: 330 µF, 35 V; Ø D = 10 x 16 mm
Curve 3: 470 µF, 25 V; Ø D = 10 x 16 mm
Curve 4: 470 µF, 35 V; Ø D = 10 x 20 mm
Curve 5: 1000 µF, 25 V; Ø D = 12.5 x 20 mm
Curve 6: 1000 µF, 35 V; Ø D = 12.5 x 25 mm
Curve 7: 3300 µF, 25 V; Ø D = 16 x 31 mm
Z
(Ω)
103
Tamb (20 °C)
Fig. 9 - Typical multiplier of impedance
as a function of ambient temperature
102
102
1
102
Curve 1: 100 µF, 63 V; Ø D = 10 x 12 mm
Curve 2: 220 µF, 50 V; Ø D = 10 x 16 mm
Curve 3: 220 µF, 63 V; Ø D = 10 x 20 mm
Curve 4: 330 µF, 63 V; Ø D = 12.5 x 20 mm
Curve 5: 470 µF, 50 V; Ø D = 12.5 x 20 mm
Curve 6: 470 µF, 63 V; Ø D = 12.5 x 25 mm
Z
(Ω)
10
1
1
2
3
4
5
6
7
-1
10
-1
10
10-2
10-2
10
102
103
104
f (Hz)
105
Tamb (20 °C)
Fig. 11 - Typical impedance as a function of frequency
Revision: 05-Oct-12
Curve 7: 1000 µF, 63 V; Ø D = 16 x 31 mm
Curve 8: 1000 µF, 40 V; Ø D = 16 x 35 mm
10
102
103
3
4
5
6
7
8
104
1
2
f (Hz)
105
Tamb (20 °C)
Fig. 12 - Typical impedance as a function of frequency
Document Number: 28318
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
048 RML
www.vishay.com
Vishay BCcomponents
RIPPLE CURRENT AND USEFUL LIFE
CCC206
3.8
3.7
IA
IR 3.6
3.5
3.4
3.3
3.2
3.1
3.0
2.8
Lifetime multiplier
2.6
0
1.
2.4
5
1.
0
2.
2.2
0
3.
0
4.
2.0
0
6.
0
8.
1.8
12
1.6
20
60
1.2
1.0
0.8
0.5
0.0
(1)
0
10
0
15 0
20
IA = Actual ripple current at 100 Hz
IR = Rated ripple current at 100 Hz, 105 °C
(1)
Useful life at 105 °C and IR applied (see Table 4)
30
1.4
40
50
60
70
80
90
100
110
Tamb (°C)
Fig. 13 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 3
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
IR MULTIPLIER
FREQUENCY
(Hz)
UR = 6.3 V to 25 V
UR = 35 V and 40 V
UR = 50 V and 63 V
50
0.95
0.85
0.80
100
1.00
1.00
1.00
300
1.07
1.20
1.25
1000
1.12
1.30
1.40
3000
1.15
1.35
1.50
10 000
1.20
1.40
1.60
Revision: 05-Oct-12
Document Number: 28318
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
048 RML
www.vishay.com
Vishay BCcomponents
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
Endurance
REFERENCE
IEC 60384-4/
EN130300
subclause 4.13
PROCEDURE
(quick reference)
REQUIREMENTS
Tamb = 105 °C; UR applied;
2000 h
UR  6.3 V; C/C: + 15 %/- 30 %
UR  6.3 V; C/C: ± 15 %
tan   1.3 x spec. limit
Z  2 x spec. limit
IL5  spec. limit
Useful life
CECC 30301
subclause 1.8.1
Tamb = 105 °C; UR and IR applied;
Case Ø D = 10 mm and 12.5 mm: 3000 h
Case Ø D = 16 mm and 18 mm: 4000 h
UR  6.3 V; C/C: + 45 %/- 50 %
UR  6.3 V; C/C: ± 45 %
tan   3 x spec. limit
Z  3 x spec. limit
IL5  spec. limit
No short or open circuit
Total failure percentage:  1 %
Shelf life
(storage at
high temperature)
IEC 60384-4/
EN130300
subclause 4.17
Tamb = 105 °C; no voltage applied;
1000 h
After test: UR to be applied for 30 min,
24 h to 48 h before measurement
UR  6.3 V; C/C: + 15 %/- 30 %
UR  6.3 V; C/C: ± 15 %
tan   1.3 x spec. limit
Z  2 x spec. limit
IL5  2 x spec. limit
Revision: 05-Oct-12
Document Number: 28318
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000