ETC CX20437

SmartHSF Mobile Modem
Host-Processed, V.90/K56flex
 Modem Device Set with
CX11250 Host Side Device, CX20463 SmartDAA
, and
Optional CX20437 Voice Codec for PCI Bus/Mini PCIBased Mobile Applications
Data Sheet
Conexant Proprietary Information
Doc. No. 100553B
July 28, 2000
SmartHSF Mobile Modem Data Sheet
Revision History
Revision
Date
Comments
B
7/28/2000
Revision B release.
A
4/19/2000
Initial release.
© 2000, Conexant Systems, Inc.
All Rights Reserved.
Information in this document is provided in connection with Conexant Systems, Inc. (“Conexant”) products. These materials are provided by
Conexant as a service to its customers and may be used for informational purposes only. Conexant assumes no responsibility for errors or
omissions in these materials. Conexant may make changes to specifications and product descriptions at any time, without notice. Conexant
makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from
future changes to its specifications and product descriptions.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in
Conexant’s Terms and Conditions of Sale for such products, Conexant assumes no liability whatsoever.
THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO
SALE AND/OR USE OF CONEXANT PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A
PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT,
COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. CONEXANT FURTHER DOES NOT WARRANT THE ACCURACY OR
COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS.
CONEXANT SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING
WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
Conexant products are not intended for use in medical, lifesaving or life sustaining applications. Conexant customers using or selling
Conexant products for use in such applications do so at their own risk and agree to fully indemnify Conexant for any damages resulting from
such improper use or sale.
The following are trademarks of Conexant Systems, Inc.: Conexant™, the Conexant C symbol, “What’s Next in Communications
Technologies”™, K56flex™, SmartDAA™, and SmartHSF. Product names or services listed in this publication are for identification
purposes only, and may be trademarks of third parties. Third-party brands and names are the property of their respective owners.
For additional disclaimer information, please consult Conexant’s Legal Information posted at www.conexant.com, which is incorporated by
reference.
Reader Response: Conexant strives to produce quality documentation and welcomes your feedback. Please send comments and
suggestions to [email protected]. For technical questions, contact your local Conexant sales office or field applications engineer.
ii
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
Contents
REVISION HISTORY .....................................................................................................................................................II
1.
INTRODUCTION................................................................................................................................................. 1-1
1.1
1.2
1.3
1.4
2.
TECHNICAL SPECIFICATIONS......................................................................................................................... 2-1
2.1
2.2
2.3
2.4
100553B
OVERVIEW .............................................................................................................................................. 1-1
FEATURES .............................................................................................................................................. 1-4
1.2.1
General Modem Features .......................................................................................................... 1-4
1.2.2
PCI Bus Host Interface Features ............................................................................................... 1-5
1.2.3
SmartDAA Features ................................................................................................................... 1-5
1.2.4
Applications................................................................................................................................ 1-5
TECHNICAL OVERVIEW ......................................................................................................................... 1-5
1.3.1
General Description ................................................................................................................... 1-5
1.3.2
Host Modem Software................................................................................................................ 1-5
1.3.3
Operating Modes........................................................................................................................ 1-6
Data/Fax Modes ................................................................................................................ 1-6
Synchronous Access Mode - Video Conferencing............................................................ 1-6
TAM Mode......................................................................................................................... 1-6
Voice/Speakerphone Mode (S Models)............................................................................. 1-6
Personal Digital Cellular High Speed Mode (C Models).................................................... 1-6
PDC Packet Mode (C Models) .......................................................................................... 1-7
PHS Mode (C Models) ...................................................................................................... 1-7
cdmaOne Data Mode IS95A (C Models)........................................................................... 1-7
cdmaOne Data Packet Mode IS95B (C Models)............................................................... 1-7
GSM Mode (C Models)...................................................................................................... 1-7
1.3.4
Reference Design ...................................................................................................................... 1-7
HARDWARE DESCRIPTION ................................................................................................................... 1-7
1.4.1
CX11250 Host Side Device........................................................................................................ 1-7
1.4.2
Digital Isolation Barrier............................................................................................................... 1-8
1.4.3
CX20463 SmartDAA Line Side Device ...................................................................................... 1-8
1.4.4
CX20437 Voice Codec (S Models) ............................................................................................ 1-8
ESTABLISHING DATA MODEM CONNECTIONS ................................................................................... 2-1
Dialing ............................................................................................................................... 2-1
Modem Handshaking Protocol .......................................................................................... 2-1
Call Progress Tone Detection ........................................................................................... 2-1
Answer Tone Detection..................................................................................................... 2-1
Ring Detection................................................................................................................... 2-1
Billing Protection ............................................................................................................... 2-1
Connection Speeds........................................................................................................... 2-1
Automode.......................................................................................................................... 2-1
DATA MODE ............................................................................................................................................ 2-1
Speed Buffering (Normal Mode) ....................................................................................... 2-1
DTE-to-Modem Flow Control............................................................................................. 2-1
Escape Sequence Detection............................................................................................. 2-1
GSTN Cleardown (V.90/K56flex, V.34, V.32 bis, V.32)..................................................... 2-2
Fall Forward/Fallback (V.90/K56flex, V.34/V.32 bis/V.32) ................................................ 2-2
Retrain............................................................................................................................... 2-2
ERROR CORRECTION AND DATA COMPRESSION ............................................................................. 2-2
V.42 Error Correction ........................................................................................................ 2-2
MNP 2-4 Error Correction.................................................................................................. 2-2
V.42 bis Data Compression .............................................................................................. 2-2
MNP 5 Data Compression ................................................................................................ 2-2
FAX CLASS 1 OPERATION..................................................................................................................... 2-2
Conexant
iii
SmartHSF Mobile Modem Data Sheet
2.5
2.6
2.7
2.8
2.9
2.10
3.
HARDWARE INTERFACE.................................................................................................................................. 3-1
3.1
3.2
3.3
3.4
4.
CX11250 HSD HARDWARE PINS AND SIGNALS.................................................................................. 3-1
3.1.1
HSD Signal Interfaces................................................................................................................ 3-1
PCI Bus/Mini PCI Host Interface ....................................................................................... 3-1
Power Detection and Switching ........................................................................................ 3-1
Serial EEPROM Interface.................................................................................................. 3-1
LSD Interface (Through DIB) ............................................................................................ 3-2
VC Interface (S Models).................................................................................................... 3-2
Telephone Handset Interface (S Models) ......................................................................... 3-2
Call Progress Speaker Interface ....................................................................................... 3-2
PDC/PDC packet Interface ............................................................................................... 3-2
PHS Interface.................................................................................................................... 3-2
CDMA Interface................................................................................................................. 3-3
GSM Interface ................................................................................................................... 3-3
3.1.2
HSD Interface Signals, Pin Assignments, and Signal Definitions .............................................. 3-3
CX20463 SMARTDAA LSD HARDWARE PINS AND SIGNALS.............................................................. 3-16
3.2.1
LSD Signal Interfaces .............................................................................................................. 3-16
HSD Interface (Through DIB) .......................................................................................... 3-16
Telephone Line Interface ................................................................................................ 3-16
3.2.2
LSD Interface Signals, Pin Assignments, and Signal Definitions............................................. 3-16
CX20437 VC HARDWARE PINS AND SIGNALS (S MODELS) ............................................................ 3-21
3.3.1
VC Signal Interfaces ................................................................................................................ 3-21
Speakerphone Interface.................................................................................................. 3-21
Telephone Handset/Headset Interface ........................................................................... 3-21
HSD Interface.................................................................................................................. 3-21
3.3.2
VC Interface Signals, Pin Assignments, and Signal Definitions............................................... 3-21
ELECTRICAL ENVIRONMENTAL, AND TIMING SPECIFICATIONS .................................................... 3-27
3.4.1
Operating Conditions, Absolute Maximum Ratings, and Power Requirements ....................... 3-27
Caution: Handling CMOS Devices .................................................................................. 3-27
3.4.2
SERIAL EEPROM INTERFACE TIMING ................................................................................. 3-29
HOST SOFTWARE INTERFACE ....................................................................................................................... 4-1
4.1
iv
VOICE/TAM MODE .................................................................................................................................. 2-2
2.5.1
Online Voice Command Mode ................................................................................................... 2-2
2.5.2
Voice Receive Mode .................................................................................................................. 2-3
2.5.3
Voice Transmit Mode ................................................................................................................. 2-3
2.5.4
Speakerphone Modes ................................................................................................................ 2-3
FULL-DUPLEX SPEAKERPHONE (FDSP) MODE .................................................................................. 2-3
CALLER ID............................................................................................................................................... 2-3
MULTIPLE COUNTRY SUPPORT (W MODELS) .................................................................................... 2-3
2.8.1
OEM Programmable Parameters............................................................................................... 2-3
2.8.2
Blacklist Parameters .................................................................................................................. 2-4
DIAGNOSTICS......................................................................................................................................... 2-4
2.9.1
Commanded Tests..................................................................................................................... 2-4
LOW POWER SLEEP MODE .................................................................................................................. 2-4
PCI CONFIGURATION REGISTERS ....................................................................................................... 4-1
4.1.1
0x00 - Vendor ID Field ............................................................................................................... 4-2
4.1.2
0x02 - Device ID Field................................................................................................................ 4-2
4.1.3
0x04 - Command Register ......................................................................................................... 4-2
4.1.4
0x06 - Status Register................................................................................................................ 4-3
4.1.5
0x08 - Revision ID Field ............................................................................................................. 4-3
4.1.6
0x09 - Class Code Field............................................................................................................. 4-3
4.1.7
0x0D - Latency Timer Register .................................................................................................. 4-3
4.1.8
0x0E - Header Type Field .......................................................................................................... 4-3
4.1.9
0x28 - CIS Pointer Register ....................................................................................................... 4-3
4.1.10 0x2C - Subsystem Vendor ID Register ...................................................................................... 4-3
4.1.11 0x2E- Subsystem ID Register .................................................................................................... 4-4
4.1.12 0x34 - Cap Ptr ............................................................................................................................ 4-4
4.1.13 0x3C - Interrupt Line Register .................................................................................................... 4-4
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
4.2
4.3
5.
100553B
4.1.14 0x3D - Interrupt Pin Register...................................................................................................... 4-4
4.1.15 0x3E - Min Grant Register.......................................................................................................... 4-4
4.1.16 0x3F - Max Latency Register ..................................................................................................... 4-4
4.1.17 0x40 - Capability Identifier.......................................................................................................... 4-4
4.1.18 0x41 - Next Item Pointer ............................................................................................................ 4-4
4.1.19 0x42 - PMC - Power Management Capabilities ......................................................................... 4-5
4.1.20 0x44 - PMCSR - Power Management Control/Status Register (Offset = 4) ............................... 4-5
4.1.21 0x46 - PMCSR_BSE - PMCSR PCI to PCI Bridge Support Extensions..................................... 4-6
4.1.22 0x47 - Data................................................................................................................................. 4-6
BASE ADDRESS REGISTER .................................................................................................................. 4-6
SERIAL EEPROM INTERFACE ............................................................................................................... 4-7
4.3.1
Supported EEPROM Sizes ........................................................................................................ 4-7
4.3.2
Definitions .................................................................................................................................. 4-8
Device ID Register ............................................................................................................ 4-8
Vendor ID Register............................................................................................................ 4-8
Subsystem Vendor ID and Subsystem Device Register ................................................... 4-8
Min_Gnt Register .............................................................................................................. 4-8
Max_Lat Register .............................................................................................................. 4-8
PMC [8:6] and PME DRV Type ......................................................................................... 4-9
Class Code Register (Class Code, Sub-class Code, Prog. I/F) ........................................ 4-9
CardBus CIS Pointer (CardBus CIS pointer High, CardBus CIS pointer Low) (Not
Used)................................................................................................................................. 4-9
Data Scale PMCSR[14:13] (D0C, D1C, D2C, D3C, D0D, D1D, D2D, D3D) ..................... 4-9
Data Register (D3, D2, D1, D0 power consumed and D3, D2, D1, D0 power
dissipated)......................................................................................................................... 4-9
Load CISRAM Count (CIS _SIZE) (Not Used) .................................................................. 4-9
PACKAGE DIMENSIONS................................................................................................................................... 5-1
Conexant
v
SmartHSF Mobile Modem Data Sheet
Figures
Figure 1-2. SmartHSF Modem Major Interfaces....................................................................................................................... 1-3
Figure 3-1. CX11250 HSD Hardware Interface Signals ........................................................................................................... 3-4
Figure 3-2. CX11250 HSD 100-Pin TQFP Pin Signals............................................................................................................. 3-5
Figure 3-3. CX20463 LSD Hardware Interface Signals .......................................................................................................... 3-17
Figure 3-4. CX20463 LSD 32-Pin TQFP Pin Signals ............................................................................................................. 3-17
Figure 3-5. CX20437 VC Hardware Interface Signals ............................................................................................................ 3-22
Figure 3-6. CX20437 VC 32-Pin TQFP Pin Signals ............................................................................................................... 3-22
Figure 3-7. Waveforms - Serial EEPROM Interface ............................................................................................................... 3-29
Figure 5-1. Package Dimensions - 100-Pin TQFP ................................................................................................................... 5-1
Figure 5-2. Package Dimensions - 32-pin TQFP...................................................................................................................... 5-2
Tables
Table 1-1. SmartHSF Modem Models and Functions............................................................................................................... 1-2
Table 3-1. CX11250 HSD 100-Pin TQFP Pin Signals .............................................................................................................. 3-6
Table 3-2. CX11250 HSD Pin Signal Definitions ...................................................................................................................... 3-9
Table 3-3. Cell Phone/Telephone Line Interface Signals ....................................................................................................... 3-15
Table 3-4. CX20463 LSD 32-Pin TQFP Pin Signals............................................................................................................... 3-18
Table 3-5. CX20463 LSD Pin Signal Definitions .................................................................................................................... 3-19
Table 3-6. CX20463 LSD DC Electrical Characteristics ......................................................................................................... 3-20
Table 3-7. CX20437 VC 32-Pin TQFP Pin Signals................................................................................................................. 3-23
Table 3-8. CX20437 VC Pin Signal Definitions ...................................................................................................................... 3-24
Table 3-9. CX20437 VC Digital Electrical Characteristics ...................................................................................................... 3-26
Table 3-10. CX20437 VC Analog Electrical Characteristics................................................................................................... 3-26
Table 3-11. Operating Conditions........................................................................................................................................... 3-27
Table 3-12. Absolute Maximum Ratings................................................................................................................................. 3-27
Table 3-13. Current and Power Requirements ....................................................................................................................... 3-28
Table 3-14. Timing - Serial EEPROM Interface...................................................................................................................... 3-29
Table 4-1. PCI Configuration Registers.................................................................................................................................... 4-1
Table 4-2. Command Register ................................................................................................................................................. 4-2
Table 4-3. Status Register........................................................................................................................................................ 4-3
Table 4-4. Power Management Capabilities (PMC) Register ................................................................................................... 4-5
Table 4-5. Power Management Control/Status Register (PMCSR) .......................................................................................... 4-5
Table 4-6. HSD Address Map................................................................................................................................................... 4-6
Table 4-7. EEPROM Content for 256 Words by 16 Bits per Word ........................................................................................... 4-7
Table 4-8. EEPROM Content for 128 Words by 16 Bits per Word ........................................................................................... 4-7
vi
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
1.
INTRODUCTION
1.1
OVERVIEW
The Conexant SmartHSF Host-Processed (SoftK56) V.90/K56flex Modem Device Family with SmartDAA technology
supports analog data up to 56 kbps, analog fax to 14.4 kbps, telephone answering machine (TAM), and PCI Bus/Mini PCI
host interface operation. In addition, the device set optionally supports cellular phone interface (PDC high speed/PDC packet
data, PHS data, CDMA/CDMA Packet data, GSM data) or voice/speakerphone. These modem devices meet the size and
power requirements of the mobile environment. Table 1-1 lists the available models.
The modem operates with PSTN telephone lines in the U.S./Japan/Canada and, optionally, worldwide. Optional cellular
interface supports Japanese PDC (Personal Digital Cellular) and PHS (Personal Handyphone System) phones, GSM (Global
System for Mobile Communications) phones, and cdmaOne (IS-95A/IS-95B) phones. Modem and cellular data protocol
software is provided.
Conexant's SmartDAA technology (patent pending) eliminates the need for a costly line transformer, relays, and optoisolators typically used in discrete DAA (Data Access Arrangement) implementations. The SmartDAA architecture also
simplifies product implementation by eliminating the need for country-specific board configurations enabling worldwide
homologation of a single modem board design.
The SmartDAA system-powered DAA operates reliably without drawing power from the line, unlike line-powered DAAs which
operate poorly when line current is insufficient due to long lines or poor line conditions. Enhanced features, such as
monitoring of local extension status without going off-hook, are also supported.
Incorporating Conexant’s proprietary Digital Isolation Barrier (DIB) design (patent pending) and other innovative DAA
features, such as Digital PBX line protection and reporting, the SmartDAA architecture simplifies application design,
minimizes layout area, and reduces component cost.
For over a decade, Conexant has assisted customers with DAA technology and homologation. This expertise and system
level approach has been leveraged in this product.
The SmartHSF device set, consisting of a CX11250 Host Side Device (HSD) in a 100-pin TQFP and a CX20463 SmartDAA
Line Side Device (LSD) in a 32-pin TQFP, supports data/fax/TAM operation with host software-based digital signal processing
and cell phone/DAA/telephone line interface functions.
The optional CX20437 Voice Codec (VC), in a 32-pin TQFP, supports voice/full-duplex speakerphone (FDSP) operation with
interfaces to a microphone, speaker, and telephone handset/headset. Because some cellular interface signals and CX20437
VC interface signals share the same CX11250 HSD pins, speakerphone configuration does not support the cellular interface.
The major hardware signal interfaces are identified in Figure 1-1.
In V.90/K56flex data mode, the modem can receive data at speeds up to 56 kbps from a digitally connected V.90 or K56flexcompatible central site modem. In this mode, the modem can transmit data at speeds up to V.34 rates.
In V.34 data mode, the modem operates at line speeds up to 33.6 kbps. When applicable, error correction (V.42/MNP 2-4)
and data compression (V.42 bis/MNP 5) maximize data transfer integrity and boost average data throughput. Non-errorcorrecting mode is also supported.
Fax Group 3 send and receive rates are supported up to 14.4 kbps with T.30 protocol.
V.80 synchronous access mode supports host-controlled communication protocols, e. g., H.324 video conferencing.
Audio recording and playback over the telephone line interface using A-Law, µ-Law, or linear coding at 8 kHz sample rate
supports applications such as remote digital telephone answering machine (TAM).
This designer's guide describes the modem hardware capabilities and identifies the supporting commands. Commands and
parameters are defined in the Commands Reference Manual (Doc. No. 100498, formerly identified as Doc. No. 1118).
100553B
Conexant
1-1
SmartHSF Mobile Modem Data Sheet
Table 1-1. SmartHSF Modem Models and Functions
Model/Order/Part Numbers
Marketing Name
Device Set
Order No.
Host Side
Device (HSD)
[100-Pin TQFP]
Part No.
Supported Hardware Functions (See Note 3)
Line Side
Device (LSD)
[32-Pin TQFP]
Part No.
Voice Codec
(VC)
[32-Pin TQFP]
Part No.
Host
Bus
DAA
Type
PDC HS/ V.90/K56flex
PDC Packet,
Data,
PHS,
V.17 Fax,
TAM
CDMA, GSM
Worldwide
Voice/
FDSP
—
SmartHSF/MC-PCI
DS56-L155-111
11250-11
20463-12
—
PCI
US/J/C
Y
Y
—
SmartHSF/MS-PCI
DS56-L155-121
11250-11
20463-12
20437-11
PCI
US/J/C
N
Y
—
Y
SmartHSF/MWC-PCI
DS56-L155-131
11250-11
20463-11
—
PCI
WW
Y
Y
Y
—
SmartHSF/MWS-PCI
DS56-L155-141
11250-11
20463-11
20437-11
PCI
WW
N
Y
Y
Y
NOTES:
1. Model options:
C
Cellular
M
Mobile
S
Voice/full-duplex speakerphone (FDSP)
W
Worldwide support including U.S./Japan/Canada
-PCI
PCI Bus/Mini PCI interface
2. Supported functions (Y = Supported; – = Not supported):
TAM
Telephone answering machine (Voice playback and record through telephone line)
FDSP
Full-duplex speakerphone and voice playback and record through telephone line, handset, and mic/speaker
PDC HS
Personal Digital Cellular High Speed data
PDC Packet
Personal Digital Cellular Packet data
PHS
Personal Handyphone System
CDMA
Code Division Multiple Access
GSM
Global System for Mobile Communications data
3. Software configuration/functions determined by Device ID programmed into EEPROM (see Section 4.3).
4. For ordering purposes, the CX prefix may not be included in the part number for some devices. Also, the CX prefix may not appear in the part number as branded on
some devices.
1-2
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
OEM
Supplied
Hardware
Conexant Modem Product
OEM/Customer
Supplied
Software
Conexant
Modem
Software
Conexant Modem Hardware Devices
DAA Hardware
CX11250
Host Side Device (HSD)
100-Pin TQFP
Host Computer
SmartDAA
Interface
Operating
System Software
and
Modem
Communication
Application
Software
Modem
Software
Drivers
PCI Bus/
MiniPCI
CX20463 SmartDAA
Line Side Device (LSD)
32-Pin TQFP
Digital
Isolation
Barrier (DIB)
Components
Rectifier
and Filter
Components
Line
Side
DIB
Interface
(LSDI)
Codec
Telephone
Line
Interface
Telephone
Line Interface
Discrete
Components
Voice Relay,
HS Pickup
Detector
(Optional)
PCI Bus
Interface
Voice
Codec
Interface
CX20437
Voice Codec (VC)
32-Pin TQFP
(Optional)
Call Progress
Cell
Phone
Interface
TELEPHONE
LINE
TIP
RING
TELEPHONE
HANDSET
TIP
RING
HS Hybrid
Components
(Optional)
(Mic/Speaker)
SPEAKER
Interface
(Optional)
Digital
Speaker
Circuit
(Optional)
PDC/
PDC Packet/
PHS/CDMA/
CDMA Packet/
GSM Interface
(Optional)
MIC
SPEAKER
SOUNDUCER
PDC/PHS/
CDMA/
GSM
PHONE
Note: Speakerphone configuration does not support the cellular interface.
100553_F1-2_FID
Figure 1-1. SmartHSF Modem Major Interfaces
100553B
Conexant
1-3
SmartHSF Mobile Modem Data Sheet
1.2
FEATURES
1.2.1
General Modem Features
• V.90 data modem with receive rates up to 56k bps and send rates up to V.34 rates
− ITU-T V.90, K56flex, V.34 (33.6 kbps), V.32 bis, V.32, V.22 bis, V.22, V.23, and V.21; Bell 212A and 103
− V.42 LAPM and MNP 2-4 error correction
− V.42 bis and MNP 5 data compression
− V.250 and V.251 commands
• V.17 fax modem with send and receive rates up to 14.4 kbps
− V.17, V.29, V.27 ter, and V.21 channel 2
− EIA/TIA 578 Class 1 and T.31 Class 1.0 commands
• Telephony/TAM
− V.253 commands
− 8-bit µ-Law/A-Law coding (G.711)
− 8-bit/16-bit linear coding
− 8 kHz sample rate
− Concurrent DTMF, ring, and Caller ID detection
• V.80 synchronous access mode supports host-controlled communication protocols with H.324 interface support
• V.8/V.8bis and V.251 commands
• Cellular data hardware interface and software support (C models)
− Protocol stacks for PDC high speed data, PDC packet data, PHS data, CDMA IS-95A/IS-95B data, and GSM data
− API for customer-provided cellular data protocol stack
• Full-duplex Speakerphone (FDSP) Mode (S models)
− Microphone and speaker interface
− Telephone handset/headset interface
• Data/Fax/Voice call discrimination
• Host software/MMX-based digital signal processing
• Single configuration profile stored in host
• Operates in U.S./Japan/Canada
• Worldwide operation including U.S./Japan/Canada (W models)
− Complies to TBR21 and other country requirements
− Caller ID detection
• System compatibility
− Windows 95/98, Windows NT 4.0, Windows 2000, and Windows Millennium (Windows Me) operating systems
− Microsoft'/Intel PC 99 Windows Hardware Designer’s Guide-compliant
− Advanced Configuration and Power Interface (ACPI)
− Unimodem/V compliant
− Pentium 166 MHz MMX-compatible PC or greater
− 16 Mbyte RAM or more
• Thin packages support low profile designs
− CX11250 HSD: 100-pin TQFP (1.2 mm max. height)
− CX20463 LSD: 32-pin TQFP (1.6 mm max. height)
− CX20437 VC: 32-pin TQFP (1.6 mm max. height)
• +3.3V operation with +5V tolerant digital inputs
1-4
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
1.2.2
PCI Bus Host Interface Features
• 32-bit PCI Bus host interface
− Meets PCI Local Bus Specification Rev. 2.2
− PCI Bus Mastering interface
− 33 MHz PCI clock support
• Supports Power Management
− Meets PCI Bus Power Management Spec. Rev. 1.1
− ACPI Power Management Registers
− APM support
− PME# support
− Vaux/Vpci power switching support (-PCI model option)
− VauxDET support
1.2.3
•
•
•
•
•
•
•
•
•
•
•
•
•
SmartDAA Features
Digital PBX line protection
System side powered DAA operates under poor line current supply conditions
Wake-on-ring
Ring detection
Line polarity reversal detection
Line current loss detection
Caller ID (CID) detect
Pulse dialing
Line-in-use detection – detects even while on-hook
Remote hang-up detect – for efficient call termination
Extension pickup detect
Call waiting detection
Meets worldwide DC VI Masks requirements (W models)
1.2.4
Applications
• Laptop, notebook, and handheld computers
• PCI Bus/Mini PCI embedded system boards
• PCI Bus/Mini PCI plug-in cards
1.3
TECHNICAL OVERVIEW
1.3.1
General Description
Modem operation, including dialing, call progress, telephone line interface, telephone handset interface, PDC High
Speed/GSM interface, voice/speakerphone interface, and host interface functions are supported and controlled through the
V.250, V.251, and V.253-compatible command set.
The modem hardware connects to the host processor via a PCI/Mini PCI bus interface. The OEM adds a crystal circuit,
EEPROM, DIB and LSD power rectifier and filter components, telephone line interface, optional telephone handset interface,
optional PDC high speed/GSM interface, optional voice/speakerphone interface, and other supporting discrete components
as required by the modem model and the application to complete the system.
1.3.2
Host Modem Software
The host modem software performs the following tasks:
1.
General modem control, which includes command sets, fax Class 1, TAM, voice/speakerphone, error correction, data
compression, GSM protocol stacks, PDC high speed data protocol stacks and phone drivers, and operating system
interface functions.
2.
Modem data pump signal processing, which includes data and facsimile modulation and demodulation, as well as voice
sample formatting, is performed by the host processor using Conexant SoftK56 technology.
3.
SmartDAA control, which includes HSD SmartDAA Interface control, LSD configuration and control, telephone line
interface parameter control, and telephone line impedance control.
Configurations of the modem software are provided to support modem models listed in Table 1-1.
100553B
Conexant
1-5
SmartHSF Mobile Modem Data Sheet
1.3.3
Operating Modes
Data/Fax Modes
In V.90/K56flex data modem mode, the modem can receive data from a digital source using a V.90- or K56flex-compatible
central site modem at line speeds up to 56 kbps. Asymmetrical data transmission supports sending data at line speeds up to
V.34 rates. This mode can fallback to full-duplex V.34 mode, and to lower rates, as dictated by line conditions.
In V.34 data modem mode, the modem can operate in 2-wire, full-duplex, asynchronous modes at line rates up to 33.6 kbps.
Data modem modes perform complete handshake and data rate negotiations. Using V.34 modulation to optimize modem
configuration for line conditions, the modem can connect at the highest data rate that the channel can support from 33600
bps down to 2400 bps with automatic fallback. Automode operation in V.34 is provided in accordance with PN3320 and in
V.32 bis in accordance with PN2330. All tone and pattern detection functions required by the applicable ITU or Bell standard
are supported.
In V.32 bis data modem mode, the modem can operate at line speeds up to 14.4 kbps.
In fax modem mode, the modem can operate in 2-wire, half-duplex, synchronous modes and can support Group 3 facsimile
send and receive speeds of 14400, 12000, 9600, 7200, 4800, and 2400 bps. Fax data transmission and reception performed
by the modem are controlled and monitored through the EIA/TIA-578 Class 1 or T.31 Class 1.0 command interface. Full
HDLC formatting, zero insertion/deletion, and CRC generation/checking are provided.
Synchronous Access Mode - Video Conferencing
V.80 Synchronous Access Mode (SAM) between the modem and the host/DTE is provided for host-controlled communication
protocols, e.g., H.324 video conferencing applications.
Voice-call-first (VCF) before switching to a videophone call is also supported.
TAM Mode
TAM Mode features include 8-bit µ-Law, A-Law, and linear coding at 8 kHz sample rate. Full-duplex voice supports concurrent
voice receive and transmit. Tone detection/generation, call discrimination, and concurrent DTMF detection are also
supported. This mode supports applications such as digital TAM, voice annotation, and recording from and playback to the
telephone line. ADPCM (4-bit IMA) coding is also supported to meet Microsoft WHQL logo requirements.
TAM Mode is supported by three submodes:
1.
Online Voice Command Mode supports connection to the telephone line or, for S models, a
microphone/speaker/handset/headset.
2.
Voice Receive Mode supports recording voice or audio data input from the telephone line or, for S models, a
microphone/handset/headset.
3.
Voice Transmit Mode supports playback of voice or audio data to the telephone line or, for S models, a
speaker/handset/headset.
Voice/Speakerphone Mode (S Models)
The S models include additional telephone handset, external microphone, and external speaker interfaces which support
voice and full-duplex speakerphone (FDSP) operation.
Hands-free full-duplex telephone operation is supported in Speakerphone Mode under host control. Speakerphone Mode
features an advanced proprietary speakerphone algorithm which supports full-duplex voice conversation with acoustic, line,
and handset echo cancellation. Parameters are constantly adjusted to maintain stability with automatic fallback from fullduplex to pseudo-duplex operation. The speakerphone algorithm allows position independent placement of microphone and
speaker. The host can separately control volume, muting, and AGC in microphone and speaker channels.
NOTE: Because some cellular interface signals and CX20437 VC interface signals share the same CX11250 HSD pins,
speakerphone configuration does not support the cellular interface.
Personal Digital Cellular High Speed Mode (C Models)
Personal Digital Cellular (PDC) High Speed Mode, implemented in host software, includes V.42 bis data compression and
ARQ framing. A pass-through mode is also available to allow phone book data to be transferred to and from the PC at speeds
up to 9600 bps (e.g., for editing on the PC). PDC High Speed Mode is enabled by the +WS46=20 and +CPDCM=2 AT
commands and disabled by the +WS46=1 AT command.
1-6
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
PDC Packet Mode (C Models)
PDC Packet Mode, implemented in host software as an optional mode of PDC, enables packet-based data communications
at 28.8 kbps. PDC Packet Data Mode is enabled by the +WS46=20 and +CPDCM=3 AT commands and disabled by the
+WS46=1 AT command.
PHS Mode (C Models)
PHS Data Mode is implemented in host software and supports a data rate of 32 kbps. PHS uses the PIAFS protocol stack.
PHS Data Mode is enabled by the +WS46=26 AT command and disabled by the +WS46=1 AT command.
cdmaOne Data Mode IS95A (C Models)
cdmaOne Data Mode is implemented in host software and supports data rates of 9.6 kbps and 14.4 kbps. cdmaOne Data
Mode is enabled by the +WS46=13 AT command and disabled by the +WS46=1 AT command.
cdmaOne Data Packet Mode IS95B (C Models)
cdmaOne Data Packet Mode is implemented in host software and supports a data rate of 64 kbps. cdmaOne Data Packet
Mode is enabled by the +WS46=13 AT command and disabled by the +WS46=1 AT command.
GSM Mode (C Models)
GSM Mode, implemented in host software, supports data and fax transfer. The supported features include:
• Data modem
− V.21, V.23, V.22, V.22 bis, V.32
− ISDN interoperability: 300 bps to 9600 bps
• Transparent asynchronous mode up to 9600 bps
• Non-transparent mode (RLP) up to 9600 bps
• Fax modem send and receive rate up to 9600 bps
• AT GSM commands (ETSI 07.07)
• GSM direct connect
• Driver interface for OEM-provided phone driver
• Built-in parallel host (16550A UART) interface
GSM mode is enabled by the +WS46=12 AT command and disabled by the +WS46=1 AT command.
1.3.4
Reference Design
A Mini PCI Type IIIB data/fax/TAM reference design board is available to minimize application design time and costs.
The board is pretested to pass FCC Part 15, Part 68, and CTR 21 for immediate manufacturing.
A design package for the board is available in electronic form. The design package includes schematics, bill of materials
(BOM), vendor parts list (VPL), board layout files in Gerber format, and complete documentation.
The design can also be used for the basis of a custom design by the OEM to accelerate design completion for rapid market
entry.
1.4
HARDWARE DESCRIPTION
SmartDAA technology (patent pending) eliminates the need for a costly analog transformer, relays, and opto-isolators that
are typically used in discrete DAA implementations. The programmable SmartDAA architecture simplifies product
implementation in worldwide markets by eliminating the need for country-specific components.
1.4.1
CX11250 Host Side Device
The CX11250 Host Side Device (HSD), packaged in a 100-pin TQFP, includes a PCI/Mini PCI Interface and a SmartDAA
Interface.
The PCI/Mini PCI interface connects directly to an embedded or external PCI/Mini PCI interface eliminating the need for
additional external logic components.
The SmartDAA Interface communicates with, and supplies power and clock to, the LSD through the DIB.
100553B
Conexant
1-7
SmartHSF Mobile Modem Data Sheet
1.4.2
Digital Isolation Barrier
The OEM-supplied Digital Isolation Barrier (DIB) electrically DC isolates the HSD from the LSD and telephone line. The HSD
is connected to a fixed digital ground and operates with standard CMOS logic levels. The LSD is connected to a floating
ground and can tolerate high voltage input (compatible with telephone line and typical surge requirements).
The DIB transformer couples power and clock from the HSD to the LSD. (See Mobile Product Updates for qualified
transformers.)
The DIB data channel supports bidirectional half-duplex serial transfer of data, control, and status information between the
HSD and the LSD.
1.4.3
CX20463 SmartDAA Line Side Device
The CX20463 SmartDAA Line Side Device (LSD) includes a Line Side DIB Interface (LSDI), a coder/decoder (codec), and a
Telephone Line Interface (TLI).
The LSDI communicates with, and receives power and clock from, the SmartDAA interface in the HSD through the DIB.
LSD power is received from the HSD PWRCLKP and PWRCLKN pins via the DIB through a half-wave rectifying diode and
capacitive power filter circuit connected to the DIB transformer secondary winding. The CLK input is also coupled from the
transformer secondary winding through a capacitor and a resistor in series.
Information is transferred between the LSD and the HSD through the DIB_P and DIB_N pins. These pins connect to the HSD
DIB_DATAP and DIB_DATAN pins, respectively, through the DIB.
The TLI integrates DAA and direct telephone line interface functions and connects directly to the line TIP and RING pins, as
well as to external line protection components.
Direct LSD connection to TIP and RING allows real-time measurement of telephone line parameters, such as the telephone
central office (CO) battery voltage, individual telephone line (copper wire) resistance, and allows dynamic regulation of the offhook TIP and RING voltage and total current drawn from the central office (CO). This allows the modem to maintain
compliance with U.S. and worldwide regulations and to actively control the DAA power dissipation.
1.4.4
CX20437 Voice Codec (S Models)
The optional CX20437 Voice Codec (VC), packaged in a 32-pin TQFP, supports voice/full-duplex speakerphone (FDSP)
operation with interfaces to a microphone and speaker and to a telephone handset/headset.
1-8
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
2.
TECHNICAL SPECIFICATIONS
2.1
ESTABLISHING DATA MODEM CONNECTIONS
Dialing
DTMF Dialing. DTMF dialing using DTMF tone pairs is supported in accordance with ITU-T Q.23. The transmit tone level
complies with Bell Publication 47001.
Pulse Dialing. Pulse dialing is supported in accordance with EIA/TIA-496-A.
Blind Dialing. The modem can blind dial in the absence of a dial tone if enabled by the X0, X1, or X3 command.
Modem Handshaking Protocol
If a tone is not detected within the time specified in the S7 register after the last digit is dialed, the modem aborts the call
attempt.
Call Progress Tone Detection
Ringback, equipment busy, and progress tones can be detected in accordance with the applicable standard represented by
the country profile currently in affect.
Answer Tone Detection
Answer tone can be detected over the frequency range of 2100 ± 40 Hz in ITU-T modes and 2225 ± 40 Hz in Bell modes.
Ring Detection
A ring signal can be detected from a TTL-compatible square wave input (frequency is country-dependent).
Billing Protection
When the modem goes off-hook to answer an incoming call, both transmission and reception of data are prevented for a
period of time determined by country requirement to allow transmission of the billing signal.
Connection Speeds
Data modem line speed can be selected using the +MS command in accordance with V.25 ter. The +MS command selects
modulation, enables/disables automode, and selects transmit and receive minimum and maximum line speeds.
Automode
Automode detection can be enabled by the +MS command to allow the modem to connect to a remote modem in accordance
with V.25 ter.
2.2
DATA MODE
Data mode exists when a telephone line connection has been established between modems and all handshaking has been
completed.
Speed Buffering (Normal Mode)
Speed buffering allows a DTE to send data to, and receive data from, a modem at a speed different than the line speed. The
modem supports speed buffering at all line speeds.
DTE-to-Modem Flow Control
If the modem-to-line speed is less than the DTE-to-modem speed, the modem supports XOFF/XON or RTS/CTS flow control
with the DTE to ensure data integrity.
Escape Sequence Detection
The “+++” escape sequence can be used to return control to the command mode from the data mode. Escape sequence
detection is disabled by an S2 Register value greater than 127.
100553B
Conexant
2-1
SmartHSF Mobile Modem Data Sheet
GSTN Cleardown (V.90/K56flex, V.34, V.32 bis, V.32)
Upon receiving GSTN Cleardown from the remote modem in a non-error correcting mode, the modem cleanly terminates the
call.
Fall Forward/Fallback (V.90/K56flex, V.34/V.32 bis/V.32)
During initial handshake, the modem will fallback to the optimal line connection within K56flex/V.34/V.32 bis/V.32 mode
depending upon signal quality if automode is enabled by the +MS command.
When connected in V.90/K56flex/V.34/V.32 bis/V.32 mode, the modem will fall forward or fallback to the optimal line speed
within the current modulation depending upon signal quality if fall forward/fallback is enabled by the %E1 command.
Retrain
The modem may lose synchronization with the received line signal under poor line conditions. If this occurs, retraining may be
initiated to attempt recovery depending on the type of connection.
The modem initiates a retrain if line quality becomes unacceptable if enabled by the %E command. The modem continues to
retrain until an acceptable connection is achieved, or until 30 seconds elapse resulting in line disconnect.
2.3
ERROR CORRECTION AND DATA COMPRESSION
V.42 Error Correction
V.42 supports two methods of error correction: LAPM and, as a fallback, MNP 4. The modem provides a detection and
negotiation technique for determining and establishing the best method of error correction between two modems.
MNP 2-4 Error Correction
MNP 2-4 is a data link protocol that uses error correction algorithms to ensure data integrity. Supporting stream mode, the
modem sends data frames in varying lengths depending on the amount of time between characters coming from the DTE.
V.42 bis Data Compression
V.42 bis data compression mode operates when a LAPM or MNP connection is established.
The V.42 bis data compression employs a “string learning” algorithm in which a string of characters from the DTE is encoded
as a fixed length codeword. Two dictionaries, dynamically updated during normal operation, are used to store the strings.
MNP 5 Data Compression
MNP 5 data compression mode operates during an MNP connection.
In MNP 5, the modem increases its throughput by compressing data into tokens before transmitting it to the remote modem,
and by decompressing encoded received data before sending it to the DTE.
2.4
FAX CLASS 1 OPERATION
Facsimile functions operate in response to Fax Class 1 commands when +FCLASS=1 or +FCLASS=1.0.
In the fax mode, the on-line behavior of the modem is different from the data (non-fax) mode. After dialing, modem operation
is controlled by fax commands. Some AT commands are still valid but may operate differently than in data modem mode.
Calling tone is generated in accordance with T.30.
2.5
VOICE/TAM MODE
Voice and audio functions are supported by the Voice Mode. Voice Mode includes three submodes: Online Voice Command
Mode, Voice Receive Mode, and Voice Transmit Mode.
2.5.1
Online Voice Command Mode
This mode results from the connection to the telephone line or a voice/audio I/O device (e.g., microphone or speaker) through
the use of the +FCLASS=8 and +VLS commands. After mode entry, AT commands can be entered without aborting the
connection.
2-2
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
2.5.2
Voice Receive Mode
This mode is entered when the +VRX command is active in order to record voice or audio data input, typically from a
microphone or the telephone line.
Received analog voice samples are converted to digital form and compressed for reading by the host. AT commands control
the codec sample rate.
Received analog mono audio samples are converted to digital form and formatted into 8-bit µ-Law, A Law, linear, or 4-bit IMA
ADPCM format for reading by the host. AT commands control the bit length and sampling rate. Concurrent DTMF/tone
detection is available.
2.5.3
Voice Transmit Mode
This mode is entered when the +VTX command is active in order to playback voice or audio data, typically to a speaker or to
the telephone line. Concurrent DTMF/tone detection is available. Digitized audio data is converted to analog form.
2.5.4
Speakerphone Modes
Speakerphone modes are selected in voice mode with the following commands:
Speakerphone ON/OFF (+VSP). This command turns the Speakerphone function ON (+VSP = 1) or OFF (+VSP = 0).
Microphone Gain (+VGM=<gain>). This command sets the microphone gain of the Speakerphone function.
Speaker Gain (+VGS=<gain>). This command sets the speaker gain of the Speakerphone function.
2.6
FULL-DUPLEX SPEAKERPHONE (FDSP) MODE
The modem operates in FDSP mode when +FCLASS=8 and +VSP=1 (see 2.5.4).
In FDSP Mode, speech from a microphone or handset is converted to digital form, shaped, and output to the telephone line
through the line interface circuit. Speech received from the telephone line is shaped, converted to analog form, and output to
the speaker or handset. Shaping includes both acoustic and line echo cancellation.
2.7
CALLER ID
Caller ID can be enabled/disabled using the +VCID command. When enabled, caller ID information (date, time, caller code,
and name) can be passed to the DTE in formatted or unformatted form. Inquiry support allows the current caller ID mode and
mode capabilities of the modem to be retrieved from the modem. The retrieval of the Caller ID via an explicit AT query at a
later time is essential for implementing a compliant “Instantly available PC” concept.
2.8
MULTIPLE COUNTRY SUPPORT (W MODELS)
W models support modem operation in various countries. The country choice is made via the AT+GCI command or country
select applet from within those installed in Windows registry. The following capabilities are provided in addition to the data
modem functions previously described. Country dependent parameters are included in the .INF file for customization by the
OEM Programmable Parameters
2.8.1
OEM Programmable Parameters
The following parameters are programmable:
• Dial tone detection levels and frequency ranges
• DTMF dialing transmit output level, DTMF signal duration, and DTMF interdigit interval parameters
• Pulse dialing parameters such as make/break times, set/clear times, and dial codes
• Ring detection frequency range
• Blind dialing disable/enable
• The maximum, minimum, and default carrier transmit level values
• Calling tone, generated in accordance with V.25, may also be disabled
• Call progress frequency and tone cadence for busy, ringback, congested, dial tone 1, and dial tone 2
• Answer tone detection period
• On-hook/off-hook, make/break, and set/clear relay control parameters
100553B
Conexant
2-3
SmartHSF Mobile Modem Data Sheet
2.8.2
Blacklist Parameters
The modem can operate in accordance with requirements of individual countries to prevent misuse of the network by limiting
repeated calls to the same number when previous call attempts have failed. Call failure can be detected for reasons such as
no dial tone, number busy, no answer, no ringback detected, voice (rather than modem) detected, and key abort (dial attempt
aborted by user). Actions resulting from such failures can include specification of minimum inter-call delay, extended delay
between calls, and maximum numbers of retries before the number is permanently forbidden ("blacklisted"). Up to 20 such
numbers may be tabulated. The blacklist parameters are programmable. The current blacklisted and delayed numbers can be
queried via AT*B and AT*D commands, respectively.
2.9
DIAGNOSTICS
2.9.1
Commanded Tests
Diagnostics are performed in response to the &T1 command per V.54.
Analog Loopback (&T1 Command). Data from the local DTE is sent to the modem, which loops the data back to the local
DTE.
Last Call Status Report (#UD). This command reports the status of the last call.
2.10
LOW POWER SLEEP MODE
When not connected in data, fax, or speakerphone mode, the HSD is placed in a low power state, i.e., Idle Mode.
2-4
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
3.
HARDWARE INTERFACE
3.1
CX11250 HSD HARDWARE PINS AND SIGNALS
3.1.1
HSD Signal Interfaces
PCI Bus/Mini PCI Host Interface
The Host Side Device conforms to the PCI Local Bus Specification Version 2.2 and Mini PCI Specification Draft 1.0. It is a
memory slave and a bus master for PC host memory accesses (burst transactions). Configuration is by PCI configuration
protocol.
The PCI Bus/Mini PCI interface signals are:
• Address and data
− 32 bidirectional Address/Data (AD[31-0]); bidirectional
− 4 Bus Command and Byte Enable (CBE [3:0]); bidirectional
− Bidirectional Parity (PAR); bidirectional
• Interface control
− Cycle Frame (FRAME#); bidirectional
− Initiator Ready (IRDY#); bidirectional
− Target Ready (TRDY#); bidirectional
− Stop (STOP#); bidirectional
− Initialization Device Select (IDSEL); input
− Device Select (DEVSEL#); bidirectional
• Arbitration
− Request (REQ#); output
− Grant (GRANT#); input
• Error reporting
− Parity Error (PERR#); bidirectional
− System Error (SERR#); bidirectional
• Interrupt
− Interrupt A (INTA#); output
• System
− Clock (PCICLK); input
− Reset (PCIRST#); input
− Clock Running (CLKRUN#); input
− Power Management Event (PME#), output
Power Detection and Switching
• Vaux Enable (VauxEN#); output
• Vpci Enable (VpciEN#); output
• Vpci Detect (VpciDET); input
• Vaux Detect (VauxDET); input
Serial EEPROM Interface
A serial EEPROM is required to store the Device ID, Vendor ID, Subsystem ID, Subsystem Vendor ID, and Power
Management parameters for the PCI Configuration Space Header.
The EEPROM must be 2048 (128 x 16) bits or larger and be rated at 1MHz (SROMCLK is 537.6 kHz). For example, the
following EEPROMs or equivalent may be used: Microchip 93LC66B (256 x 16), 93LC56B (128 x 16), Atmel AT93C66 (256 x
16), AT93C56 (128 x 16). The EEPROM is programmable by the PC via the modem.
The EEPROM interface signals are:
• Serial Data Input (SROMIN); input
• Serial Data Output (SROMOUT); output
• Clock (SROMCLK); output
• Chip Select (SROMCS); output
100553B
Conexant
3-1
SmartHSF Mobile Modem Data Sheet
LSD Interface (Through DIB)
The DIB interface signals are:
• Clock and Power Positive (PWRCLKP); output
• Clock and Power Negative (PWRCLKN); output
• Data Positive (DIB_DATAP); input/output
• Data Negative (DIB_DATAN); input/output
VC Interface (S Models)
The VC interface signals are:
• Modem Sleep (IASLEEP); output
• Master Clock (M_CLK); output
• Voice Serial Clock (V_SCLK); input
• Voice Serial Control (V_CTRL); output
• Voice Serial Frame Sync (V_STROBE); input
• Voice Serial Transmit Data (V_TXSIN); output
• Voice Serial Receive Data (V_RXOUT); input
Telephone Handset Interface (S Models)
The telephone handset interface signals are:
• Voice Relay Control (VOICE#); output
• Handset Pickup Detect (H_PICKUP); input
Call Progress Speaker Interface
The call progress speaker interface signal is:
• Digital speaker output (DSPKOUT); output
DSPKOUT is a square wave output in Data/Fax mode used for call progress or carrier monitoring. This output can be
optionally connected to a low-cost on-board speaker, e.g., a sounducer, or to an analog speaker circuit.
PDC/PDC packet Interface
Nine lines, defined by the installed cell phone driver software, are available to support the PDC/PDC packet cellular phone
interface:
• Panel 1
• Panel 2
• ADP
• CELL_RXD
• CELL_TXD
• TCH_CLK
• TCH_TX
• TCH_RX
• TCH_FRAME
PHS Interface
Eleven lines, defined by the installed cell phone driver software, are available to support the PHS cellular phone interface.
• ASLP
• PSLP
• DFCK
• Ready
• DSDT
• USDT
• BITC
• UDT
• DDT
• UFCK
3-2
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
CDMA Interface
Twelve lines, defined by the installed cell phone driver software, are available to support the CDMA cellular phone interface:
• Panel 1
• Panel 2
• CB
• CF
• CJ
• CC
• CE
• CD
• Control RXD
• Control TXD
• BB (USART IN)
• BA (USART OUT)
GSM Interface
Five lines, defined by the installed cell phone driver software, are available to support the GSM phone interface:
• DA(IN)
• RX-A
• TX-A
• TX-A
• RX2-B USART
• TX2-B USART
3.1.2
HSD Interface Signals, Pin Assignments, and Signal Definitions
The CX11250 HSD 100-pin TQFP hardware interface signals are shown by major interface in Figure 3-1, are shown by pin
number in Figure 3-2, and are listed by pin number in Table 3-1.
The CX11250 HSD hardware interface signals are defined in Table 3-2.
Cell phone/telephone line interface signal assignments are listed in Table 3-3.
100553B
Conexant
3-3
SmartHSF Mobile Modem Data Sheet
27pF
5%
74
28.224
MHz
SDXTAL1
1M
33
75
SDXTAL2
27pF
5%
PCI BUS/
MINI PCI
EEPROM
86
67
66
65
64
62
61
60
59
56
55
54
53
52
51
50
49
37
35
34
33
32
30
29
28
24
23
21
20
19
17
16
15
57
48
38
25
10
39
27
42
40
41
46
13
12
8
43
44
45
14
9
22
26
CLKRUN#
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
AD8
AD9
AD10
AD11
AD12
AD13
AD14
AD15
AD16
AD17
AD18
AD19
AD20
AD21
AD22
AD23
AD24
AD25
AD26
AD27
AD28
AD29
AD30
AD31
C/BE0#
C/BE1#
C/BE2#
C/BE3#
PCICLK
FRAME#
IDSEL
DEVSEL#
IRDY#
TRDY#
PAR
REQ#
GNT#
INTA#
STOP#
PERR#
SERR#
PME#
PCIRST#
VIO/+3.3V
76
79
78
77
SROMCS
SROMCLK
SROMIN
SROMOUT
71
80
69
79
VpciDET
VauxDET
VpciEN#
VauxEN#
POWER DETECTION AND
SWITCHING CIRCUIT
97
+3.3V
SROMCS
SROMCLK
SROMIN
SROMOUT
VpciDET
VauxDET
VpciEN#
VauxEN#
PLLVDD
0.1uF
98
84
+3.3V
240K
+3.3V
CLKRUN#
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
AD8
AD9
AD10
AD11
AD12
AD13
AD14
AD15
AD16
AD17
AD18
AD19
AD20
AD21
AD22
AD23
AD24
AD25
AD26
AD27
AD28
AD29
AD30
AD31
CBE0#
CBE1#
CBE2#
CBE3#
PCICLK
FRAME#
IDSEL
DEVSEL#
IRDY#
TRDY#
PAR
REQ#
GNT#
INTA#
STOP#
PERR#
SERR#
PME#
PCIRST#
VIO
VIO
7
18
31
47
58
68
94
11
36
63
89
72
73
PLLVSS
LP_CLK
VDD
VDD
VDD
VDD
VDD
VDD
VDD
GND
GND
GND
GND
CX11250
HOST SIDE DEVICE
(HSD)
100-PIN TQFP
PWRCLKP
92
PWRCLKP
PWRCLKN
93
PWRCLKN
DIB_DATAP
91
DIB_DATAP
DIB_DATAN
90
DIB_DATAN
DRESET# (GPOL0)
M_CLK/PANEL1 (GPIO12)
V_CTRL/PANEL2 (GPIO13)
V_SCLK/CB (GPIO7)
V_RXOUT/ASLP/CF (GPIO1)
V_TXSIN/PSLP/CJ (GPIO9)
V_STROBE/CC/DA(IN) (GPIO0)
IASLEEP/DFCK/CE/RXA
Binary Audio In (GPIO10)
VOICE#/ADP/RDY/CD(GPIO2)
SPKMUTE/CRXD/DSDT (GPIO8)
DSPKOUT/CTXD/USDT//TXA (GPIO11)
TCH_CLK/BITC (GPIO6)
TCH_TX/UDT/TXA (GPIO5)
TCH_RX/DDT/ BB/RX2B (GPIO4)
TCH_FRAME/UFCK/BA/TX2B (GPIO3)
95
5
6
3
2
4
1
96
88
100
99
87
81
82
83
85
DRESET# (GPOL0)
M_CLK/PANEL1 (GPIO12)
V_CTRL/PANEL2 (GPIO13)
V_SCLK/CB (GPIO7)
V_RXOUT/ASLP/CF (GPIO1)
V_TXSIN/PSLP/CJ (GPIO9)
V_STROBE/CC/DA(IN) (GPIO0)
IASLEEP/DFCK/CE/RXA
Binary Audio In (GPIO10)
VOICE#/ADP/RDY/CD(GPIO2)
SPKMUTE/CRXD/DSDT (GPIO8)
DSPKOUT/CTXD/USDT//TXA (GPIO11)
TCH_CLK/BITC (GPIO6)
TCH_TX/UDT/TXA (GPIO5)
TTCH_RX/DDT/ BB/RX2B (GPIO4)
TCH_FRAME/UFCK/BA/TX2B (GPIO3)
95
5
6
3
2
4
1
96
88
100
99
87
81
82
83
85
NC
DRESET# (GPOL0)
M_CLK/PANEL1 (GPIO12)
V_CTRL/PANEL2 (GPIO13)
V_SCLK/CB (GPIO7)
V_RXOUT/ASLP/CF (GPIO1)
V_TXSIN/PSLP/CJ (GPIO9)
V_STROBE/CC/DA(IN) (GPIO0)
IASLEEP/DFCK/CE/RXA
Binary Audio In (GPIO10)
VOICE#/ADP/RDY/CD(GPIO2)
SPKMUTE/CRXD/DSDT (GPIO8)
DSPKOUT/CTXD/USDT//TXA (GPIO11)
TCH_CLK/BITC (GPIO6)
TCH_TX/UDT/TXA (GPIO5)
TCH_RX/DDT/ BB/RX2B (GPIO4)
TCH_FRAME/UFCK/BA/TX2B (GPIO3)
95
5
6
3
2
4
1
96
88
100
99
87
81
82
83
85
NC
NC
NC
NC
DRESET# (GPOL0)
M_CLK/PANEL1 (GPIO12)
V_CTRL/PANEL2 (GPIO13)
V_SCLK/CB (GPIO7)
V_RXOUT/ASLP/CF (GPIO1)
V_TXSIN/PSLP/CJ (GPIO9)
V_STROBE/CC/DA(IN) (GPIO0)
IASLEEP/DFCK/CE/RXA
Binary Audio In (GPIO10)
VOICE#/ADP/RDY/CD(GPIO2)
SPKMUTE/CRXD/DSDT (GPIO8)
DSPKOUT/CTXD/USDT//TXA (GPIO11)
TCH_CLK/BITC (GPIO6)
TCH_TX/UDT/TXA (GPIO5)
TCH_RX/DDT/ BB/RX2B (GPIO4)
TCH_FRAME/UFCK/BA/TX2B (GPIO3)
95
5
6
3
2
4
1
96
88
100
99
87
81
82
83
85
NC
DRESET# (GPOL0)
M_CLK/PANEL1 (GPIO12)
V_CTRL/PANEL2 (GPIO13)
V_SCLK/CB (GPIO7)
V_RXOUT/ASLP/CF (GPIO1)
V_TXSIN/PSLP/CJ (GPIO9)
V_STROBE/CC/DA(IN) (GPIO0)
IASLEEP/DFCK/CE/RXA
Binary Audio In (GPIO10)
VOICE#/ADP/RDY/CD(GPIO2)
SPKMUTE/CRXD/DSDT (GPIO8)
DSPKOUT/CTXD/USDT//TXA (GPIO11)
TCH_CLK/BITC (GPIO6)
TCH_TX/UDT/TXA (GPIO5)
TCH_RX/DDT/ BB/RX2B (GPIO4)
TCH_FRAME/UFCK/BA/TX2B (GPIO3)
95
5
6
3
2
4
1
96
88
100
99
87
81
82
83
85
NC
NC
NC
NC
NC
NC
POR
M_CLKIN
M_CNTRLSIN
M_SCK
M_RXOUT
M_TXSIN
M_STROBE
SLEEP
Binary Audio Source
VOICE RELAY
MUTE SPEAKER
CALL PROG DIGITAL AUDIO
DIGITAL
ISOLATION
BARRIER
(DIB)
TELEPHONE LINE
INTERFACE
CONFIGURATION
VOICE CODEC (VC)
20437
32-PIN TQFP
SPEAKER CIRCUIT
NC
NC
NC
NC
Panel 1
Panel 2
NC
NC
NC
NC
NC
NC
PDC/PDC PACKET
INTERFACE
CONFIGURATION
PDC PHONE
ADP
CELL_RXD
CELL_TXD
TCH_CLK
TCH_TX
TCH_RX
TCH_FRAME
PHS
INTERFACE
CONFIGURATION
ASLP
PSLP
NC
DFCK
NC
RDY
DSDT
USDT
BITC
UDT
DDT
UFCK
Panel 1
Panel 2
CB
CF
CJ
CC
CE
NC
PHS PHONE
CDMA/CDMA PACKET
INTERFACE
CONFIGURATION
CDMA PHONE
CD
Control RXD
Control TXD
NC
NC
BB (USART IN)
BA (USART OUT)
GSM
INTERFACE
CONFIGURATION
DA(IN)
RX-A
NC
NC
NC
GSM PHONE
TX-A
NC
TX-A
RX2-B USART
TX2-B USART
SCANEN
SCANMODE
100553_F3-1_ HIS 11250 100T
Figure 3-1. CX11250 HSD Hardware Interface Signals
3-4
Conexant
100553B
V_STROBE/CC/DA(IN) (GPIO0)
V_RXOUT/ASLP/CF (GPIO1)
V_SCLK/CB (GPIO2)
V_TXSIN/PSLP/CJ (GPIO9)
M_CLK/PANEL1 (GPIO12)
V_CTRL/PANEL2 (GPIO13)
VauxDET
SROMCLK
SROMIN
SROMOUT
SROMCS
79
78
77
76
TCH_CLK/BITC (GPIO6)
81
80
TCH_RX/DDT/BB/RX2B (GPIO4)
TCH_TX/UDT/TXA(GPIO5)
83
82
TCH_FRAME/UFCK/BA/TX2B (GPIO3)
LP_CLK
85
84
DSPKOUT/CTXD/USDT (GPIO11)
CLKRUN#
87
86
DIB_DATAN
GND
Bin Audio In (GPIO10)
90
89
88
PWRCLKP
DIB_DATAP
91
93
92
DRESET# (GPOL0)
VDD
PWRCLKN
95
94
PLLVDD
IASLEEP/DFCK/CE/RXA
97
96
SPKMUTE/CRXD/DSDT (GPIO8)
PLLVSS
98
VOICE#/ADP/RDY/CD (GPIO2)
99
100
SmartHSF Mobile Modem Data Sheet
1
75
SDXTAL2
2
74
SDXTAL1
3
4
73
SCANMODE
72
SCANEN
5
71
VPCIDET
VauxEN#
6
70
VDD
7
69
VpciEN#
INTA#
PCIRST#
8
68
VDD
9
67
AD0
PCICLK
10
66
AD1
GND
GNT#
REQ#
11
65
AD2
12
13
64
AD3
63
GND
PME#
14
62
AD31
15
61
AD4
AD5
60
AD6
CX11250
46
47
48
49
50
CBE1#
AD15
AD14
45
PAR
SERR#
VDD
44
STOP#
PERR#
39
40
IRDY#
35
AD17
GND
CBE2#
FRAME#
33
34
AD19
AD18
41
AD12
AD13
42
43
51
TRDY#
25
DEVSEL#
CBE3#
36
AD11
52
37
53
24
38
23
AD24
AD16
AD10
31
AD9
54
32
55
22
VDD
AD8
AD20
CBE0#
56
21
29
57
20
AD26
VIO
AD25
30
19
AD27
AD22
VDD
AD21
58
28
18
26
AD7
VDD
AD28
27
59
VIO
16
17
IDSEL
AD23
AD30
AD29
100553_F3-2_ PO-11250-100TQFP
Figure 3-2. CX11250 HSD 100-Pin TQFP Pin Signals
100553B
Conexant
3-5
SmartHSF Mobile Modem Data Sheet
Table 3-1. CX11250 HSD 100-Pin TQFP Pin Signals
Pin
1
7
8
9
10
11
12
13
14
15
16
17
18
19
Signal Label
V_STROBE/
CC/
DA(IN) (GPIO0)
V_RXOUT/
ASLP/
CF (GPIO1)
V_SCLK/
CB (GPIO2)
V_TXSIN/
PSLP/
CJ (GPIO9)
M_CLK/
PANEL1
(GPIO12)
V_CTRL/
PANEL2
(GPIO13)
VDD
INTA#
PCIRST#
PCICLK
GND
GNT#
REQ#
PME#
AD31
AD30
AD29
VDD
AD28
PWR
Opod
Ip
Ip
GND
Ipts
Opts
Opod
I/Opts
I/Opts
I/Opts
PWR
I/Opts
Interface
Telephone Line: VC M_STROBE
CDMA Phone: CC
GSM Phone: DA(IN)
Telephone Line: VC M_RXOUT
PHS Phone: ASLP
CDMA Phone: CF
Telephone Line: VC M_SCK
CDMA Phone: CB
Telephone Line: VC M_TXSIN
PHS Phone: PSLP
CDMA Phone: CJ
VC Telephone Line: VC M_CLKIN
PDC Phone: Panel 1
CDMA Phone: Panel 1
Telephone Line: VC M_CNTRLSIN
PDC Phone: Panel 2
CDMA Phone: Panel 2
+3.3V
PCI Bus: INTA#
PCI Bus: PCIRST#
PCI Bus: PCICLK
GND
PCI Bus: GNT#
PCI Bus: REQ#
PCI Bus: PME#
PCI Bus: AD31
PCI Bus: AD30
PCI Bus: AD29
+3.3V
PCI Bus: AD28
Pin
51
Signal Label
AD13
I/O Type
I/Opts
Interface
PCI Bus: AD13
52
AD12
I/Opts
PCI Bus: AD12
53
AD11
I/Opts
PCI Bus: AD11
54
AD10
I/Opts
PCI Bus: AD10
55
AD9
I/Opts
PCI Bus: AD9
56
AD8
I/Opts
PCI Bus: AD8
57
58
59
60
61
62
63
64
65
66
67
68
69
CBE0#
VDD
AD7
AD6
AD5
AD4
GND
AD3
AD2
AD1
AD0
VDD
VpciEN#
I/Opts
PWR
I/Opts
I/Opts
I/Opts
I/Opts
GND
I/Opts
I/Opts
I/Opts
I/Opts
PWR
Ot2
PCI Bus: CBE0#
+3.3V
PCI Bus: AD7
PCI Bus: AD6
PCI Bus: AD5
PCI Bus: AD4
GND
PCI Bus: AD3
PCI Bus: AD2
PCI Bus: AD1
PCI Bus: AD0
+3.3V
Pwr Detection/Switching Ckt
20
21
22
23
24
25
AD27
AD26
VIO
AD25
AD24
CBE3#
I/Opts
I/Opts
PWR
I/Opts
I/Opts
I/Opts
PCI Bus: AD27
PCI Bus: AD26
PCI Bus: VI/O or +3.3V
PCI Bus: AD25
PCI Bus: AD24
PCI Bus: CBE3#
70
71
72
73
74
75
VauxEN#
VpciDET
SCANEN
SCANMODE
SDXTAL1
SDXTAL2
Ot2
Itpd
Itpd
Itpd
Ix
Ox
PWR
Ip
I/Opts
I/Opts
I/Opts
PWR
PCI Bus: VI/O or +3.3V
PCI Bus: IDSEL
PCI Bus: AD23
PCI Bus: AD22
PCI Bus: AD21
+3.3V
76
77
78
79
80
81
Ot2
Ot2
Itpu
Ot2
Itpd
Itpu/Ot12
AD20
I/Opts
PCI Bus: AD20
82
33
AD19
I/Opts
PCI Bus: AD19
83
34
AD18
I/Opts
PCI Bus: AD18
84
SROMCS
SROMOUT
SROMIN
SROMCLK
VauxDET
TCH_CLK/
BITC (GPIO6)
TCH_TX/
UDT/
TXA
(GPIO5)
TCH_RX/
DDT/
BB/
RX2B
(GPIO4)
LP_CLK
Pwr Detection/Switching Ckt
Pwr Detection/Switching Ckt
GND
GND
Crystal or Clock Circuit
Crystal or NC (if SDXTAL1 connected
to Clock Circuit)
SROM: Chip Select (CS)
SROM: Data In (DI)
SROM: Data Out (DO)
SROM: Clock (SK)
Pwr Detection/Switching Ckt
PDC Phone: TCH_CLK
PHS Phone: BITC
PDC Phone: TCH_TX K
PHS Phone: UDT
GSM Phone: TXA
26
27
28
29
30
31
VIO
IDSEL
AD23
AD22
AD21
VDD
32
2
3
4
5
6
3-6
I/O Type
Itpd
Itk
Itpd
Ot2
Ot2
Ot2
Conexant
Itpu/Ot12
Itpu/Ot12
PDC Phone: TCH_RX
PHS Phone: DDT
CDMA Phone: BB_RXD
GSM Phone: RX2-B
RC
+3.3V through 240 KΩ
100553B
SmartHSF Mobile Modem Data Sheet
Table 3-1. CX11250 HSD 100-Pin TQFP Pin Signals (Continued)
Pin
35
Signal Label
AD17
I/O Type
I/Opts
Interface
PCI Bus: AD17
Pin
85
36
37
GND
AD16
GND
I/Opts
GND
PCI Bus: AD16
86
87
Signal Label
TCH_FRAME/
UFCK/
BA/
TX2B
(GPIO3)
CLKRUN#
DSPKOUT/
CTXD/
USDT/
I/O Type
Itpu/Ot12
Interface
PDC Phone: TCH_FRAME
PHS Phone: UFCK
CDMA Phone: BA_TXD
GSM Phone: TX2-B
I/Opod
Ot12
PCI Bus: CLKRUN#
Telephone Line: Spkr circuit
PDC Phone: CELL_TXD
PHS Phone: USDT
CDMA Phone: Control TXD
GSM: TX-A
38
CBE2#
I/Opts
PCI Bus: CBE2#
88
39
40
41
42
FRAME#
IRDY#
TRDY#
DEVSEL#
I/Opsts
I/Opsts
I/Opsts
I/Opsts
PCI Bus: FRAME#
PCI Bus: IRDY#
PCI Bus: TRDY#
PCI Bus: DEVSEL#
89
90
91
92
TXA
(GPIO11)
Bin Audio In
(GPIO10)
GND
DIB_DATAN
DIB_DATAP
PWRCLKP
43
STOP#
I/Opsts
PCI Bus: STOP#
93
PWRCLKN
Odpc
44
45
PERR#
SERR#
I/Opsts
I/Opod
PCI Bus: PERR#
PCI Bus: SERR#
94
95
PWR
Ot2
46
PAR
I/Opts
PCI Bus: PAR
96
47
48
49
VDD
CBE1#
AD15
PWR
I/Opts
I/Opts
+3.3V
PCI Bus: CBE1#
PCI Bus: AD15
97
98
99
VDD
DRESET#
(GPOL0)
IASLEEP/
DFCK/
CE/
RXA
PLLVDD
PLLVSS
SPKMUTE/
Itpu
Line Interface: Binary Audio Source
GND
Idd/Odd
Idd/Odd
Odpc
GND
DIB: Data Negative Channel
DIB: Data Positive Channel
DIB: Transformer primary winding
non-dotted terminal
DIB: Transformer primary winding
dotted terminal
+3.3V
VC: POR
Ot2
PWR
GND
It/Ot12
CRXD/
DSDT (GPIO8)
50
AD14
100553B
I/Opts
PCI Bus: AD14
100
Conexant
VOICE#/ADP/
RDY/CD (GPIO2)
Ot12
Telephone Line: VC SLEEP
PHS Phone: DFCK
CDMA Phone: CE
GSM Phone: RX-A
+3.3V and to GND through 0.1 µF
GND
Telephone Line: Spkr Circuit (Out);
Vaux Mode Power Select (In)
PDC Phone: CELL_RXD
PHS Phone: DSDT
CDMA Phone: Control RXD
Telephone Line: Voice Relay Control
PDC Phone: ADP
PHS Phone: RDY
CDMA Phone: CD
3-7
SmartHSF Mobile Modem Data Sheet
NOTES:
1. I/O Types
I/Opod
Digital input/output, PCI, open drain (PCI type = o/d)
I/Opsts
Digital input/output, PCI, sustained three-state (PCI type = s/t/s)
I/Opts
Digital input/output, PCI, three-state (PCI type = t/s)
Idd
input, DIB, data channel
Ip
Digital input, PCI, totem pole (PCI type = in)
Ipts
Digital input, PCI, (PCI type = t/s)
It
Digital input, TTL-compatible
Itk
Digital input, TTL-compatible, internal keeper
Itpd
Digital input, TTL-compatible, internal 75k ± 25k Ω pull-down
Itpu
It/Ot2
Digital input, TTL-compatible, internal 75k ± 25k Ω pull-up
Digital input, TTL-compatible/digital output, TTL-compatible, 2 mA, ZINTERNAL = 120 Ω
It/Ot12
Digital input, TTL-compatible/digital output, TTL-compatible, 12 mA, ZINTERNAL = 32 Ω
Ix
Crystal/clock input
Odpc
Output, DIB power and clock channel
Odd
Output, DIB data channel
Ood
Digital output, open drain
Opod
Digital output, PCI, open drain (PCI type =o/d)
Opts
Ot2
Digital output, PCI, three-state (PCI type = t/s)
Digital output, TTL-compatible, 2 mA, ZINTERNAL = 120 Ω
Ot12
Digital output, TTL-compatible, 12 mA, ZINTERNAL = 32 Ω
Ox
Crystal output
2. Interface Legend:
NC
No internal pin connection
DIB
Digital Isolation Barrier
VC
Voice Codec
3. All references to PCI Bus also apply to Mini PCI unless otherwise specified.
3-8
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
Table 3-2. CX11250 HSD Pin Signal Definitions
Label
Pin
I/O
I/O Type
Signal Name/Description
SYSTEM
SDXTAL1
SDXTAL2
74
75
I
O
Ix
Ox
Crystal/Clock In and Crystal Out. Connect SDXTAL1 to a 28.224000 MHz
crystal or clock circuit. Connect SDXTAL2 to the 28.224000 MHz crystal circuit
or leave open if SDXTAL1 is connected to a clock circuit.
VDD
7, 18, 31, 47,
58, 68, 94
P
PWR
Digital Supply Voltage. Connect to +3.3V.
GND
11, 36, 63, 89
G
GND
Digital Ground. Connect to digital ground.
VIO
22, 26
P
PWR
I/O Signaling Voltage Reference. Connect to PCI Bus VI/O or +3.3V. Used
internally for PCI clamping.
LP_CLK
84
RC
Low Power Clock RC Circuit. Connect to +3.3V through 240 KΩ.
PLLVDD
97
P
PWR
Digital Supply Voltage. Connect to +3.3V and to GND through 0.1 µF.
PLLGND
98
G
GND
Digital Ground. Connect to digital ground.
SCANEN
72
I
Itpd
Scan Enable. Connect to GND.
SCANMODE
73
I
Itpd
Scan Mode. Connect to GND.
CLKRUN#
86
I
I/Opod,
(o/d)
Clock Running. CLKRUN# is an input used to determine the status of CLK
and an open drain output used to request starting or speeding up CLK.
Connect to GND for PCI Bus designs. Connect to CLKRUN# pin for Mini PCI
designs.
VpciDET
71
I
Itpd
POWER DETECTION
Vpci Detect. The VpciDET input indicates when PCI cycles and PCIRST# are
to be ignored. Connect this pin to the PCI Bus +5V pins for PCI Bus designs or
to PCI 3.3V for Mini PCI designs. VpciDET is deasserted when the PCI Bus
enters the B3 state.
This pin may alternatively be directly driven in embedded designs by using a
logical signal, either +5V or +3.3V level, to indicate when the PCI Bus is in a
B3 state. Driving this pin low synchronously to the PCI clock or when the PCI
clock is stopped also allows the HSD to be put into a very low power mode.
Using this method, if modem operation is not required, modem power
consumption can be reduced even while the PCI Bus is in power state B0.
VauxDET
80
I
Itpd
Vaux Detect. Active high input used to detect the presence of Vaux. Connect
to PCI Bus: Vaux. At device power on (POR), if D3_Cold bit in the EEPROM is
a 1, PMC[15] is set to a 1 if VauxDET is high or PMC[15] is cleared to a 0 if
VauxDET is low.
VpciEN#
69
O
Ot2
Vpci Enable. Active low output used to enable Vpci FET. For use in designs
that switch between Vaux and Vpci for different power states and for retail
designs where the target PC may or may not support Vaux.
VauxEN#
70
O
Ot2
Vaux Enable. Active low output used to enable Vaux FET. For use in designs
that switch between Vaux and Vpci for different power states and for retail
designs where the target PC may or may not support Vaux.
SROMCLK
79
O
Ot2
Serial ROM Shift Clock. Connect to SROM SK input (frequency: 537.6 kHz).
SROMCS
76
O
Ot2
Serial ROM Chip Select. Connect to SROM CS input.
SROMIN
78
I
Itpu
Serial ROM Device Status and Data Out. Connect to SROM DO output,
through 1 kΩ if using a +5V EEPROM.
SROMOUT
77
O
Ot2
Serial ROM Instruction, Address, and Data In. Connect to SROM DI input.
SERIAL EEPROM INTERFACE
100553B
Conexant
3-9
SmartHSF Mobile Modem Data Sheet
Table 3-2. CX11250 HSD Pin Signal Definitions (Continued)
Label
Pin
I/O
I/O Type
Signal Name/Description
PCI BUS INTERFACE
PCICLK
10
I
Ip
(in)
PCI Bus Clock. The PCICLK (PCI Bus CLK signal) input provides timing for all
transactions on PCI. Connect to PCI Bus: CLK.
PCIRST#
9
I
Ip
(in)
PCI Bus Reset. Active low input asserted to initialize PCI-specific registers,
sequencers, and signals to a consistent reset state. Connect to PCI Bus:
RST#.
AD[31:0]
15-17, 19-21,
23-24, 28-30,
32-35, 37, 4956, 59-62, 6467
I/O
I/Opts
(t/s)
Multiplexed Address and Data. Address and Data are multiplexed on the
same PCI pins. Connect to PCI Bus: AD[31-0].
CBE0#
CBE1#
CBE2#
CBE3#
57
48
38
25
I/O
I/Opts
(t/s)
Bus Command and Bus Enable. Bus Command and Byte Enables are
multiplexed on the same PCI pins. During the address phase of a transaction,
CBE[3:0]# define the bus command. During the data phase, CBE[3:0]# are
used as Byte Enables. Connect to PCI Bus: CBE[3:0]#.
PAR
46
I/O
I/Opts
(t/s)
Parity. Parity is even parity across AD[31:00] and CBE[3:0]#. The master
drives PAR for address and write data phases; the Bus Interface drives PAR
for read data phases. Connect to PCI Bus: PAR.
FRAME#
39
I/O
I/Opsts
(s/t/s)
Cycle Frame. FRAME# is driven by the current master to indicate the
beginning and duration of an access. Connect to PCI Bus: FRAME#.
IRDY#
40
I/O
I/Opsts
(s/t/s)
Initiator Ready. IRDY# is used to indicate the initiating agent’s (bus master’s)
ability to complete the current data phase of the transaction. IRDY# is used in
conjunction with TRDY#. Connect to PCI Bus: IRDY#.
TRDY#
41
I/O
I/Opsts
(s/t/s)
Target Ready. TRDY# is used to indicate s the Bus Interface’s ability to
complete the current data phase of the transaction. TRDY# is used in
conjunction with IRDY#. Connect to PCI Bus: TRDY#.
STOP#
43
I/O
I/Opsts
(s/t/s)
Stop. STOP# is asserted to indicate the Bus Interface is requesting the master
to stop the current transaction. Connect to PCI Bus: STOP#.
IDSEL
27
I
Ip
(in)
Initialization Device. IDSEL input is used as a chip select during configuration
read and write transactions. Connect to PCI Bus: IDSEL.
DEVSEL#
42
I/O
I/Opsts
(s/t/s)
Device Select. When actively driven, DEVSEL# indicates the driving device
has decoded its address as the target of the current access. As an input,
DEVSEL# indicates whether any device on the bus has been selected.
Connect to PCI Bus: DEVSEL#.
REQ#
13
O
Opts
(t/s)
Request. REQ# is used to indicate to the arbiter that this agent desires use of
the bus. Connect to PCI Bus: REQ#.
GNT#
12
I
Ipts
(t/s)
Grant. GNT# is used to indicate to the agent that access to the bus has been
granted. Connect to PCI Bus: GNT#.
PERR#
44
I/O
I/Opsts
(s/t/s)
Parity Error. PERR# is used for the reporting of data parity errors. Connect to
PCI Bus: PERR#.
SERR#
45
O
Opod
(o/d)
System Error. SERR# is an open drain output asserted to report address
parity errors, data parity errors on the Special Cycle command, or any other
system error where the result will be catastrophic. Connect to PCI Bus:
SERR#.
INTA#
8
O
Opod
(o/d)
Interrupt A. INTA# is an open drain output asserted to request an interrupt.
Connect to PCI Bus: INTA#.
PME#
14
O
Opod
(o/d)
Power Management Event. Active low open drain or active high TTL output
(selected by the PME DRV bit in the EEPROM) asserted when a valid ring
signal is detected and the PME_En bit of the PMCSR is a 1. This signal should
be used only if the target PCI Bus supports power management wake-up
event. Connect to the PCI Bus: PME#.
STSCHG#
14
O
Opod
(o/d)
Status Changed. Active low output asserted to alert the host to changes in the
RRdy/-Bsy bit (PRR1) in the Pin Replacement Register (PRR) and to the
setting of the ReqAttn bit (ESR4) in the Extended Status Register (ESR).
3-10
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
Table 3-2. CX11250 HSD Pin Signal Definitions (Continued)
Label
Pin
I/O
I/O Type
Signal Name/Description
DIB INTERFACE
PWRCLKP
92
O
Odpc
Clock and Power Positive. Provides clock and power to the LSD. Connect to
DIB transformer primary winding non-dotted terminal.
PWRCLKN
93
O
Odpc
Clock and Power Negative. Provides clock and power to the LSD. Connect to
DIB transformer primary winding dotted terminal.
DIB_DATAP
91
I/O
Idd/Odd
Data Positive. Transfers data, control, and status information between HSD
and LSD. Connect to LSD through DIB data positive channel components.
DIB_DATAN
90
I/O
Idd/Odd
Data Negative. Transfers data, control, and status information between HSD
and LSD. Connect to LSD through DIB data negative channel components.
DRESET#
(GPOL0)
95
O
Ot2
Modem Reset. Connect to VC POR pin.
M_CLK/PANEL1
(GPIO12)
5
O
Ot2
Master Clock Output. Connect to VC M_CLKIN pin.
V_CTRL/PANEL
2 (GPIO13)
6
O
Ot2
Voice Control Output. Connect to VC M_CNTRLSIN pin.
V_SCLK/CB
(GPIO2)
3
I
Itpd
Voice Serial Clock input. Connect to VC M_SCK pin.
V_RXOUT/ASLP/
CF (GPIO1)
2
I
It
Voice Serial Receive Data Input. Connect to VC M_RXOUT pin.
V_TXSIN/PSLP/
CJ (GPIO9)
4
O
Ot2
Voice Serial Transmit Data Output. Connect to VC M_TXSIN pin.
V_STROBE/CC/
DA(IN) (GPIO0)
1
I
Itpd
Voice Serial Frame Sync Input. Connect to VC M_STROBE pin.
IASLEEP/
DFCK/CE/RXA
96
O
Ot2
Modem Sleep. Connect to VC SLEEP pin.
VOICE#/ADP/
RDY/CD
(GPIO2)
100
O
Ot12
Voice Relay Control. Output (typically active low) used to control the normally
open voice relay. The polarity of this output is configurable.
SPKMUTE/
CRXD/DSDT/
(GPIO8)
99
I/O
It/Ot12
Speaker Mute/Vaux Mode Power Select. Output (typically active low) used to
turn off (mute) the speaker during normal operation. Applicable to S models
only.
TELEPHONE LINE (DAA)/AUDIO INTERFACE
Upon device reset, this pin is temporarily an input and is sampled. If sampled
high and VauxDET is high, VpciEN# will be asserted when the device is in D0.
If sampled low (e.g., SPKMUTE signal is pulled down to GND through 10k Ω)
and VauxDET is high, VauxEN# will be asserted when the device is in D0.
VauxEN# is always asserted when VauxDET is high in D3 with PME enabled.
Either VauxEN# or VpciEN#, but not both, can be asserted at the same time.
DSPKOUT/
CTXD/
USDT/CNTL_TX
D (GPIO11)
87
O
Ot12
Call Progress (Digital Speaker) Output. The DSPKOUT digital output reflects
the received analog input signal digitized to TTL high or low level by an internal
comparator. This signal is used for call progress or carrier monitoring. This
output can be optionally connected to a low-cost on-board speaker, e.g., a
sounducer, or to an analog speaker circuit.
Bin Audio In
(GPIO10)
88
I
Itpu
Binary Audio Input. Binary audio source.
100553B
Conexant
3-11
SmartHSF Mobile Modem Data Sheet
Table 3-2. CX11250 HSD Pin Signal Definitions (Continued)
Label
Pin
I/O
I/O Type
Signal Name/Description
PDC/PDC PACKET PHONE INTERFACE
M_CLK/PANEL1
(GPIO12)
5
O
Itpu/Ot12
Panel 1. Defined by the PDC firmware driver.
V_CTRL/PANEL
2 (GPIO13)
6
O
Itpu/Ot12
Panel 2. Defined by the PDC firmware driver.
VOICE#/ADP/
RDY/CD
(GPIO2)
100
O
Ot12
ADP. Defined by the PDC firmware driver.
SPKMUTE/
CRXD/
DSDT/ (GPIO8)
99
I
It/Ot12
CELL_RXD. Defined by the PDC firmware driver.
DSPKOUT/
CTXD/USDT/
(GPIO11)
87
O
Ot12
CELL_TXD. Defined by the PDC firmware driver.
TCH_CLK/BITC
(GPIO6)
81
I
Itpu/Ot12
TCH_CLK. Defined by the PDC firmware driver.
TCH_TX/UDT/
TXA(GPIO5)
82
O
Itpu/Ot12
TCH_TX. Defined by the PDC firmware driver.
TCH_RX/DDT/
BB_RXD/RX2B
(GPIO4)
83
I
Itpu/Ot12
TCH_RX. Defined by the PDC firmware driver.
TCH_FRAME/
UFCK/BA_TXD/
TX2B
(GPIO3)
85
I
Itpu/Ot12
TCH_FRAME. Defined by the PDC firmware driver.
PHS PHONE INTERFACE
V_RXOUT/ASLP/
CF (GPIO1)
2
I
It
ASLP. Defined by the PHS firmware driver.
V_TXSIN/PSLP/
CJ (GPIO9)
4
O
It/Ot2
PSLP. Defined by the PHS firmware driver.
IASLEEP/DFCK/
CE/RXA
96
I
It/Ot2
DFCK. Defined by the PHS firmware driver.
VOICE#/ADP/
RDY/CD(GPIO2)
100
O
Ot12
Ready. Defined by the PHS firmware driver.
SPKMUTE/
CRXD/DSDT
(GPIO8)
99
I
It/Ot12
DSDT. Defined by the PHS firmware driver.
DSPKOUT/
CTXD/USDT
(GPIO11)
87
O
Ot12
USDT. Defined by the PHS firmware driver.
TCH_CLK/
BITC (GPIO6)
81
I
Itpu/Ot12
BITC. Defined by the PHS firmware driver.
TCH_TX/UDT/
TXA (GPIO5)
82
O
Itpu/Ot12
UDT. Defined by the PHS firmware driver.
TCH_RX/DDT/
BB_RXD/RX2B
(GPIO4)
83
I
Itpu/Ot12
DDT. Defined by the PHS firmware driver.
TCH_FRAME/
UFCK/BA_TXD/
TX2B
(GPIO3)
85
I
Itpu/Ot12
UFCK. Defined by the PHS firmware driver.
3-12
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
Table 3-2. CX11250 HSD Pin Signal Definitions (Continued)
Label
Pin
I/O
I/O Type
Signal Name/Description
CDMA PHONE INTERFACE
M_CLK/PANEL1
(GPIO12)
5
O
Itpu/Ot12
Panel 1. Defined by the CDMA firmware driver.
V_CTRL/PANEL
2 (GPIO13)
6
O
Itpu/Ot12
Panel 2. Defined by the CDMA firmware driver.
V_SCLK/CB
(GPIO2)
3
I
Itpd
CB. Defined by the CDMA firmware driver.
V_RXOUT/ASLP/
CF (GPIO1)
2
I
It
CF. Defined by the CDMA firmware driver.
V_TXSIN/PSLP/
CJ (GPIO9)
4
O
Ot2
CJ. Defined by the CDMA firmware driver.
V_STROBE/CC/
DA(IN) (GPIO0)
1
I
Itpd
CC. Defined by the CDMA firmware driver.
IASLEEP/DFCK/
CE/RXA
96
I
Ot2
CE. Defined by the CDMA firmware driver.
VOICE#/ADP/
RDY/CD(GPIO2)
100
O
Ot12
CD. Defined by the CDMA firmware driver.
SPKMUTE/
CRXD/DSDT/
(GPIO8)
99
I
It/Ot12
Control RXD. Defined by the CDMA firmware driver.
DSPKOUT/
CTXD/USDT/
(GPIO11)
87
O
Ot12
Control TXD. Defined by the CDMA firmware driver.
TCH_RX/DDT/
BB/RX2B
(GPIO4)
83
I
Itpu/Ot12
BB (USART IN). Defined by the CDMA firmware driver.
TCH_FRAME/
UFCK/BA/TX2B
(GPIO3)
85
O
Itpu/Ot12
BA (USART OUT). Defined by the CDMA firmware driver.
GSM PHONE INTERFACE
V_STROBE/CC/
DA(IN) (GPIO0)
1
I
Itpd
DA(IN). Defined by the GSM firmware driver.
IASLEEP/DFCK/
CE/RXA
96
I
It/Ot2
RX-A. Defined by the GSM firmware driver.
DSPKOUT/
CTXD/USDT/
TXA(GPIO11)
87
O
Ot12
TX-A. Defined by the GSM firmware driver.
TCH_TX/UDT/
TXA(GPIO5)
82
O
Itpu/Ot12
TX-A. Defined by the GSM firmware driver.
TCH_RX/DDT/
BB/RX2B
(GPIO4)
83
I
Itpu/Ot12
RX2-B USART. Defined by the GSM firmware driver.
TCH_FRAME/
UFCK/BA/
TX2B
(GPIO3)
85
O
Itpu/Ot12
TX2-B USART. Defined by the GSM firmware driver.
100553B
Conexant
3-13
SmartHSF Mobile Modem Data Sheet
Table 3-2. CX11250 HSD Pin Signal Definitions (Continued)
NOTES:
1. I/O Types
I/Opod
Digital input/output, PCI, open drain (PCI type = o/d)
I/Opsts
Digital input/output, PCI, sustained three-state (PCI type = s/t/s)
I/Opts
Digital input/output, PCI, three-state (PCI type = t/s)
Idd
input, DIB, data channel
Ip
Digital input, PCI, totem pole (PCI type = in)
Ipts
Digital input, PCI, (PCI type = t/s)
It
Digital input, TTL-compatible
Itpd
Digital input, TTL-compatible, internal 75k ± 25k Ω pull-down
Itpu
It/Ot2
Digital input, TTL-compatible, internal 75k ± 25k Ω pull-up
Digital input, TTL-compatible/digital output, TTL-compatible, 2 mA, ZINTERNAL = 120 Ω
It/Ot12
Digital input, TTL-compatible/digital output, TTL-compatible, 12 mA, ZINTERNAL = 32 Ω
Ix
Crystal/clock input
Odpc
Output, DIB power and clock channel
Odd
Output, DIB data channel
Ood
Digital output, open drain
Opod
Digital output, PCI, open drain (PCI type =o/d)
Opts
Ot2
Digital output, PCI, three-state (PCI type = t/s)
Digital output, TTL-compatible, 2 mA, ZINTERNAL = 120 Ω
Ot12
Digital output, TTL-compatible, 12 mA, ZINTERNAL = 32 Ω
Ox
Crystal output
2. Interface Legend:
NC = No internal pin connection
RESERVED = No external connection allowed (may have internal connection).
3. All references to PCI Bus also apply to Mini PCI unless otherwise specified.
3-14
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
Table 3-3. Cell Phone/Telephone Line Interface Signals
Application Signal and I/O Direction
PSTN Selected
Pin
Pin Name
PSTN
Signal
95
5
DRESET# (GPOL0)
DRESET#
M_CLK/PANEL1
M_CLK
(GPIO12)
6 V_CTRL/PANEL2
V_CTRL
(GPIO13)
3 V_SCLK/CB (GPIO7)
V_SCLK
2 V_RXOUT/ASLP/CF
V_RXOUT
(GPIO1)
4 V_TXSIN/PSLP/CJ
V_TXSIN
(GPIO9)
1 V_STROBE/CC/
V_STROBE
DA(IN) (GPIO0)
96 IASLEEP/DFCK/CE/RXA IASLEEP
100 VOICE#/ADP/RDY/CD
VOICE#
(GPIO2)
99
87
81
82
83
85
SPKMUTE/CRXD/
SPKMUTE
DSDT (GPIO8)
DSPKOUT/CTXD/
DSPKOUT
USDT/TXA (GPIO11)
TCH_CLK/BITC (GPIO6)
TCH_TX/UDT/TXA
(GPIO5)
TCH_RX/DDT/BB/RX2B
(GPIO4)
TCH_FRAME/UFCK/
BA/TX2B (GPIO3)
100553B
PDC/PDC Packet
Selected
PSTN
PDC/
I/O
PDC packet
Signal
PHS Selected
CDMA Selected
GSM Selected
PDC
I/O
PHS
Signal
PHS
I/O
CDMA
Signal
CDM
A I/O
GSM
Signal
GSM
I/O
O
O
Panel 1
O
-
-
Panel 1
O
-
-
O
Panel 2
O
-
-
Panel 2
O
-
-
I
I
-
-
ASLP
I
CB
CF
I
I
-
-
O
-
-
PSLP
O
CJ
O
-
-
I
-
-
-
-
CC
I
DA(IN)
I
O
O
ADP
O
DFCK
RDY
I
O
CE
CD
I
O
RX-A
-
I
-
O
CELL_RXD
I
DSDT
I
Control RXD
I
-
-
O
CELL_TXD
O
USDT
O
Control TXD
O
TX-A
O
-
TCH_CLK
TCH_TX
I
O
BITC
UDT
I
O
-
TX-A
O
-
TCH_RX
I
DDT
I
I
RX2-B USART
I
-
TCH_FRAME
I
UFCK
I
BB
(USART IN)
BA
(USART OUT)
O
TX2-B USART
O
Conexant
3-15
SmartHSF Mobile Modem Data Sheet
3.2
CX20463 SmartDAA LSD HARDWARE PINS AND SIGNALS
3.2.1
LSD Signal Interfaces
HSD Interface (Through DIB)
The DIB interface signals are:
• Clock (CLK); input
• Digital Power (PWR+); input power
• Digital Ground (DGND); digital ground
• Data Positive (DIB_P); input
• Data Negative (DIB_N); input
Telephone Line Interface
The telephone line interface signals are:
• RING AC Coupled (RAC1); input
• TIP AC Coupled (TAC1); input
• Electronic Inductor Resistor (EIR); output
• TIP and RING DC Measurement (TRDC); input
• DAC Output Voltage (DAC); output
• Electronic Inductor Capacitor (EIC)
• Electronic Inductor Output (EIO)
• Electronic Inductor Feedback (EIF)
• Resistive Divider Midpoint (DCF)
• Transmit Analog Output (TXA); output
• Receive Analog Input (RXI); input
• Receiver Gain (RXG); output
• MOV Enable (MOVEN); output
• Worldwide Impedance 0 (ZW0); input
• US Impedance 0 (ZUS0); input
• Transmit Feedback (TXF); input
• Transmit Output (TXO); output
3.2.2
LSD Interface Signals, Pin Assignments, and Signal Definitions
LSD 32-pin TQFP hardware interface signals are shown by major interface in Figure 3-3, are shown by pin number in Figure
3-4, and are listed by pin number in Table 3-4.
LSD hardware interface signals are defined in Table 3-5.
LSD pin signal digital electrical characteristics are defined in Table 3-6.
3-16
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
RAC2
TAC2
RAC1
TAC1
DIGITAL
ISOLATION
BARRIER
(DIB)
C26
R32
27
R125
C110
POWER AND
CLOCK
CHANNEL
R110
31
24
DVDD
R124
26
PWRCLKN
CX20463
SMARTDAA
LINE SIDE
DEVICE
(LSD)
32-PIN TQFP
CLK
R112
C70
R120
C72
C30
AVDD
MOVEN (GPIO1)
25
23
PWRCLKP
C112
DATA
CHANNEL
ZW0
ZUS0
TXO
TXF
DGND
AGND
GND_LSD
AGND_LSD
R34
28
DIB_DATAP
NC
9
11
Ring
Filter
15
2
6
5
21
22
Electronic
Inductor,
Off-Hook,
Pulse Dial,
and TIP and
RING VI
Control
3
4
18
Echo
Cancellation
and
Receiver
DCF
Safety
and EMI
Protection
Telephone
Line
Connector
TIP
RING
AGND_LSD
Pulse Dial
Voltage
Protection
(Country
Specific)
32
DVDD
C28
D2
RXI
RXG
TXA
NC
PWR+
D4
C62
EIR
EIC
DAC
TRDC
EIO
EIF
10
12
14
17
20
19
Impedance
Matching
and
Transmitter
16
DIB_P
AGND_LSD
C22
VREF
R36
29
DIB_DATAN
8
DIB_N
C42
C24
VC
30
DVDD
C45
C76
7
C44
POR
C74
AGND_LSD
NOTES:
1. Consult applicable reference design for exact
AGND_LSD
component placement and values.
RBIAS
13
R54
2. R125 is usually installed.
AGND_LSD
3. R124 is usually removed.
GPIO2
1
NC
100491_F3-09_HI CX20463
32
31
30
29
28
27
26
25
MOVEN (GPIO1)
PWR+
POR
DIB_N
DIB_P
CLK
DVDD
DGND
Figure 3-3. CX20463 LSD Hardware Interface Signals
1
2
3
4
5
6
7
8
CX20463
24
23
22
21
20
19
18
17
AVDD
AGND
EIF
EIO
TXO
TXF
TXA
ZUS0
RAC1
RAC2
TAC1
TAC2
RBIAS
ZW0
EIR
DCF
9
10
11
12
13
14
15
16
GPIO2
EIC
RXI
RXG
TRDC
DAC
VC
VREF
100491F3-7 PO-20463-32T
Figure 3-4. CX20463 LSD 32-Pin TQFP Pin Signals
100553B
Conexant
3-17
SmartHSF Mobile Modem Data Sheet
Table 3-4. CX20463 LSD 32-Pin TQFP Pin Signals
Pin
Signal Label
I/O Type
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
GPIO2
EIC
RXI
RXG
TRDC
DAC
VC
VREF
RAC1
RAC2
TAC1
TAC2
RBIAS
ZW0
EIR
DCF
ZUS0
TXA
TXF
TXO
EIO
EIF
AGND
AVDD
DGND
It/Ot12
Oa
Ia
Oa
Oa
Oa
REF
REF
Ia
Ia
Ia
Ia
Ia
Ia
Ot12
Ia
Ia
Oa
Ia
Oa
Oa
Ia
AGND_LSD
PWR
GND_LSD
26
DVDD
PWR
27
CLK
I
28
29
30
31
DIB_P
DIB_N
POR
PWR+
I/O
I/O
It
PWR
32
MOVEN (GPIO1)
Ot12
NOTES:
1. I/O types*:
Ia
It
Oa
Ot12
Interface
NC
Telephone Line Interface Components
Telephone Line Interface Components
Telephone Line Interface Components
Telephone Line Interface Components
Telephone Line Interface Components
VREF through C42 and to AGND_LSD through C44 and C74
VC through C42 and to AGND_LSD through C45 and C76
Diode bridge top AC connection (RING) through R2 and C2
NC
Diode bridge bottom AC connection (TIP) through R4 and C4
NC
AGND_LSD through R54
Telephone Line Interface Components
Telephone Line Interface Components
AGND_LSD
Telephone Line Interface Components
Telephone Line Interface Components
Telephone Line Interface Components
Telephone Line Interface Components
Telephone Line Interface Components
Telephone Line Interface Components
AGND_LSD
LSD DVDD pin
DIB transformer secondary winding undotted terminal through diode D2 and R120 in series
and to GND_LSD
LSD AVDD pin, to GND_LSD through C28, C30, and C72 in parallel, and to DIB
transformer secondary winding dotted terminal through R124.
DIB transformer secondary winding undotted terminal through C26 and R32 in series, and
through R120 shared with LSD DGND pin through diode D2
DIB C22 through R34
DIB C24 through R36
LSD DVDD pin
DIB transformer secondary winding dotted terminal through R125 and to GND_LSD
through zener diode D4 and C70 in parallel
Telephone Line Interface Components
Analog input
Digital input, TTL-compatible (See Table 3-6)
Analog output
Digital output, TTL-compatible, 12 mA, ZINTERNAL = 32 Ω (See Table 3-6)
AGND_LSD Isolated LSD Analog Ground
GND_LSD
Isolated LSD Digital Ground
2. Refer to applicable reference design for exact component placement and values.
3-18
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
Table 3-5. CX20463 LSD Pin Signal Definitions
Label
Pin
I/O Type
Signal Name/Description
SYSTEM SIGNALS
AVDD
24
PWR
Analog Power Supply. Connect to the LSD DVDD pin.
AGND
23
AGND_LSD
LSD Analog Ground. LSD Analog Ground. Connect to AGND_LSD at the
GND_LSD/AGND_LSD tie point and to the analog ground plane.
POR
30
It
Power-On Reset. Connect to LSD DVDD pin.
VREF
8
REF
Output Reference Voltage. Connect to VC through C42 and to AGND_LSD through
C45 and C76. Ensure a very close proximity between C42 and C45 and the VREF pin.
VC
7
REF
Output Middle Reference Voltage. Connect to VREF through V42 and to AGND_LSD
through C44 and C74. Ensure a very close proximity between C44 and the VC pin. Use
a short path and a wide trace to AGND_LSD pin.
CLK
27
I
Clock. Provides input clock, AC-coupled, to the LSD. Connect to DIB transformer
secondary winding undotted terminal through R32 and C26 in series, and through R120
shared with LSD DGND pin through diode D2.
PWR+
31
PWR
Digital Power Input. Provides unregulated input digital power to the LSD. Connect to
DIB transformer secondary winding dotted terminal through R125, and to GND_LSD
though zener diode D4 and C70 in parallel.
DVDD
26
PWR
Digital Power. Connect to pin 24 (AVDD), to DIB transformer secondary winding dotted
terminal through R124, and to GND_LSD through C28, C30, and C72 in parallel.
DGND
25
GND_LSD
LSD Digital Ground. Connect to DIB transformer secondary winding undotted terminal
through diode D2 in series with R120, and to GND_LSD at the GND_LSD/AGND_LSD
tie point.
DIB_P
28
I/O
Data and Control Positive. Connect to HSD DIB_DATAP through C22 in the DIB and
R34 on the LSD side. DIB_P and DIB_N signals are differential, and ping-pong between
DIB and HSD (half duplex).
DIB_N
29
I/O
Data and Control Negative. Connect to HSD DIB_DATAN through C24 in the DIB and
R36 on LSD side. DIB_P and DIB_N signals are differential, and ping-pong between
DIB and HSD (half duplex).
RAC1,
TAC1
9,
11
Ia,
Ia
RING1 AC Coupled and TIP1 AC Coupled. AC-coupled voltage from telephone line
used to detect ring.
Connect RAC1 to the diode bridge AC top connection (RING) through R2 and C2.
Connect TAC1 to the diode bridge AC bottom connection (TIP) through R4 and C4.
RAC2
TAC2
EIR
10,
12
15
Ia,
Ia
Oa
RING2 AC Coupled and TIP2 AC Coupled. Not used. Leave open.
EIC
2
Oa
Electronic Inductor Capacitor Switch. Internally switched to no connect when pulse
dialing and to ground all other times. This is needed to eliminate pulse dial interference
from the electronic inductor AC filter capacitor.
DIB INTERFACE SIGNALS
TIP AND RING INTERFACE
Electronic Inductor Resistor. Electronic inductor resistor switch.
DAC
6
Oa
DAC Output Voltage. Output voltage of the reference DAC.
TRDC
5
Ia
TIP and RING DC Measurement. Input on-hook voltage (from a resistive divider). Used
internally to extract TIP and RING DC voltage and Line Polarity Reversal (LPR)
information.
EIO
21
Oa
Electronic Inductor Output. Calculated voltage is applied to this output to control
offhook, pulse dial, and DC IV mask operation.
EIF
22
Ia
Electronic Inductor Feedback. Electronic inductor feedback.
RXG
4
Oa
Receiver Gain. Receiver operational amplifier output.
RXI
3
Ia
Receive Analog Input. Receiver operational amplifier inverting input.
TXA
18
Oa
Transmit Analog Output. Transmit signal used for canceling echo in the receive path.
MOVEN (GPIO1)
32
Ot12
MOV Enable. Connect to pulse dial voltage protection circuit for Australia/Poland/Italy
use. Leave open if the product is not intended for Australia, Poland, or Italy.
RBIAS
13
Ia
Receiver Bias. Connect to GND through R54.
DCF
16
Ia
Resistive Divider Midpoint. Connect to LSD analog ground.
100553B
Conexant
3-19
SmartHSF Mobile Modem Data Sheet
Table 3-5. CX20463 LSD Pin Signal Definitions (Continued)
Label
Pin
I/O Type
Signal Name/Description
TELEPHONE LINE INTERFACE (CONTINUED)
ZW0
14
Ia
Worldwide Impedance 0. Input signal used to provide line complex impedance
matching for worldwide countries.
ZUS0
TXO
17
Ia
US Impedance 0. Input signal used to provide line impedance matching for U.S.
20
Oa
Transmit Output. Outputs transmit signal and impedance matching signal; connect to
transmitter transistor (Q6).
TXF
19
Ia
Transmit Feedback. Connect to emitter of transmitter transistor (Q6).
GPIO2
1
It/Ot12
General Purpose I/O 2. Leave open if not used.
NOTES:
1. I/O types*:
Ia
It
Oa
Ot12
Analog input
Digital input, TTL-compatible (see Table 3-6)
Analog output
Digital output, TTL-compatible, 12 mA, ZINTERNAL = 32 Ω (see Table 3-6)
NOT USED
AGND_LSD
Isolated LSD Analog Ground
GND_LSD
Isolated LSD Digital Ground
2. Refer to applicable reference design for exact component placement and values.
Table 3-6. CX20463 LSD DC Electrical Characteristics
Symbol
Min.
Typ.
Max.
Units
Input Voltage Low
Parameter
VIN
-0.30
–
3.60
V
Input Voltage Low
VIL
–
–
1.0
V
Input Voltage High
VIH
VOL
1.6
–
–
V
Output Voltage Low
0
–
0.33
V
Output Voltage High
VOH
2.97
–
–
V
–
–
–
–
-10
-10
2.4
2.4
20
–
–
–
–
10
10
100
µA
µA
mA
mA
ns
Input Leakage Current
Output Leakage Current (High Impedance)
GPIO Output Sink Current at 0.4 V maximum
GPIO Output Source Current at 2.97 V minimum
GPIO Rise Time/Fall Time
Test Conditions
VDD = +3.6V
Test conditions unless otherwise noted:
1. Test Conditions unless otherwise stated: VDD = +3.3 ± 0.3 VDC; TA = 0°C to 70°C; external load = 50 pF
3-20
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
3.3
CX20437 VC HARDWARE PINS AND SIGNALS (S MODELS)
Microphone and analog speaker interface signals, as well as telephone handset/headset interface signals are provided to
support functions such as speakerphone mode, telephone emulation, microphone voice record, speaker voice playback, and
call progress monitor.
3.3.1
VC Signal Interfaces
Speakerphone Interface
The following signals are supported:
• Speaker Out (M_SPKR_OUT); analog output - Should be used in speakerphone designs where sound quality is important
• Microphone (M_MIC_IN); analog input
Telephone Handset/Headset Interface
The following interface signals are supported:
• Telephone Input (M_LINE_IN), input (TELIN) –Optional connection to a telephone handset interface circuit
• Telephone output (M_LINE_OUTP); output (TELOUT) - Optional connection to a telephone handset interface circuit
• Center Voltage (VC); output reference voltage
HSD Interface
The following interface signals are supported:
• Reset (POR); input
• Sleep (SLEEP); input
• Master Clock (M_CLKIN); input
• Serial Clock (M_SCK); output
• Control (M_CNTRLSIN); input
• Serial Frame Sync (M_STROBE); output
• Serial Transmit Data (M_TXSIN); input
• Serial Receive Data (M_RXOUT); output
3.3.2
VC Interface Signals, Pin Assignments, and Signal Definitions
VC 32-pin TQFP hardware interface signals are shown by major interface in Figure 3-5, are shown by pin number in Figure
3-6, and are listed by pin number in Table 3-7.
VC hardware interface signals are defined in Table 3-8.
VC pin signal DC electrical characteristics are defined in Table 3-9.
VC pin signal analog electrical characteristics are defined in Table 3-10.
100553B
Conexant
3-21
SmartHSF Mobile Modem Data Sheet
CX11250
HSD
1
4
19
21
23
20
22
18
IASLEEP
DRESET#
M_CLK
V_SCLK
V_STROBE
V_TXSIN
V_RXOUT
V_CTRL
17
25
+3.3V
5
VAA (+3.3V)
28
26
M_DIG_SPEAKER
SLEEP
POR
M_CLKIN
M_SCK
M_STROBE
M_TXSIN
M_RXOUT
M_CNTRLSIN
VDD
VDD
M_MIC_IN
M_SPKR_OUT
M_LINE_IN
M_LINE_OUTP
CX20437
VOICE CODEC
M_LINE_OUTM
(VC)
32-PIN TQFP
VREF
2
NC
13
3
14
9
10
MIC
SPKOUT
AUDIO
CIRCUIT
TELIN
TELOUT
HANDSET
INTERFACE
NC
11
FERRITE
VC_HAND
MAVDD
0.1
VSS
SET3V_BAR2
VC
10
FERRITE
12
0.1
GND
6
27
M_MIC_BIAS
M_RELAYA
M_RELAYB
M_ACT90
M_1BIT_OUT
D_LPBK_BAR
NC
NC
NC
MAVSS
VSUB
AGND
15
24
16
29
30
31
7
8
32
10
AGND
NC
100533_F3-5_HI_20437 32T
SET3V_BAR2
VDD
24
23
22
21
20
1
CX20437
19
18
17
M_RELAYA
M_STROBE
M_RXOUT
M_SCK
M_TXSIN
M_CLKIN
M_CNTRLSIN
VDD
15
16
11
12
13
14
6
7
8
VREF
VC
M_MIC_IN
M_LINE_IN
M_MIC_BIAS
M_RELAYB
MAVSS
NC
NC
9
10
POR
MAVDD
2
3
4
5
M_LINE_OUTP
M_LINE_OUTM
SLEEP
M_DIG_SPEAKER
M_SPKR_OUT
27
26
25
M_1BIT_OUT
M_ACT90
VSS
VSUB
32
31
30
29
28
NC
D_LPBK_BAR
Figure 3-5. CX20437 VC Hardware Interface Signals
100491 F3-8 PO-CX20437
Figure 3-6. CX20437 VC 32-Pin TQFP Pin Signals
3-22
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
Table 3-7. CX20437 VC 32-Pin TQFP Pin Signals
Pin
1
2
3
4
5
6
7
8
9
10
11
Signal Label
SLEEP
M_DIG_SPEAKER
M_SPKR_OUT
POR
MAVDD
MAVSS
NC
NC
M_LINE_OUTP (TELOUT)
M_LINE_OUTM
VREF
12
VC
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
M_MIC_IN
M_LINE_IN (TELIN)
M_MIC_BIAS
M_RELAYB
VDD
M_CNTRLSIN
M_CLKIN
M_TXSIN
M_SCK
M_RXOUT
M_STROBE
M_RELAYA
VDD
M_SET3V_BAR2
VSUB
VSS
M_ACT90
M_1BIT_OUT
D_LPBK_BAR
NC
I/O
I
O
O
I
O
O
I/O Type
Itpd
Ot2
Oa
Itpu
PWR
AGND
Oa
Oa
REF
REF
I
I
I
I
I
O
O
O
O
I
I
O
I
Ia
Ia
PWR
Itpd
Itpd
Itpd
Ot2
Ot2
Ot2
Ot2od
PWR
Itpu
AGND
GND
Itpu
Ot2
Itpu
Interface
HSD: IASLEEP
NC
Speaker interface circuit
HSD: DRESET#
VAA (+3.3V)
AGND
NC
NC
Handset interface circuit
NC
VC through capacitors
AGND through ferrite bead and capacitors and to and to handset interface
circuit (VC_HAND) through ferrite bead
Microphone interface circuit
Handset interface circuit
NC
NC
+3.3V
HSD: V_CTRL
HSD: M_CLK
HSD: V_TXSIN
HSD: V_SCLK
HSD: V_RXOUT
HSD: V_STROBE
NC
+3.3V
GND
AGND
GND
NC
NC
NC
NC
NOTES:
1. I/O types:
Ia
It
Itpd
Itpu
It/Ot2
Analog input
Digital input, TTL-compatible
Digital input, TTL-compatible, internal 75k ± 25k Ω pull-down
Digital input, TTL-compatible, internal 75k ± 25k Ω pull-up
Digital input, TTL-compatible/digital output, TTL-compatible, 2 mA, ZINTERNAL = 120 Ω
It/Ot12
Digital input, TTL-compatible/digital output, TTL-compatible, 12 mA, ZINTERNAL = 32 Ω
Oa
Ot2
Analog output
Digital output, TTL-compatible, 2 mA, ZINTERNAL = 120 Ω
Ot12
Digital output, TTL-compatible, 12 mA, ZINTERNAL = 32 Ω
AGND
Analog Ground
GND
Digital Ground
See CX20437 VC Digital Electrical Characteristics (Table 3-9) and CX20437 VC Analog Electrical Characteristics (Table 3-10).
2. Interface Legend:
HSD
Host Side Device
100553B
Conexant
3-23
SmartHSF Mobile Modem Data Sheet
Table 3-8. CX20437 VC Pin Signal Definitions
Label
Pin
I/O Type
Signal Name/Description
SYSTEM SIGNALS
VDD
17, 25
PWR
Digital Power Supply. Connect to +3.3V and digital circuits power supply filter.
MAVDD
5
PWR
Analog Power Supply. Connect to +3.3V and analog circuits power supply filter.
VSS
28
GND
Digital Ground. Connect to GND.
MAVSS
6
AGND
Analog Ground. Connect to AGND.
VSUB
27
GND
Analog Ground. Connect to AGND.
POR
4
Itpu
Power-On Reset. Active low reset input. Connect to Host RESET#.
SET3V_BAR2
26
Itpu
Set +3.3V Analog Reference. Connect to GND.
SLEEP
1
Itpd
IA Sleep. Active high sleep input. Connect to HSD IASLEEP pin.
M_CLKIN
19
Itpd
Master Clock Input. Connect to HSD M_CLK pin.
M_SCK
21
Ot2
Serial Clock Output. Connect to HSD V_SCLK pin.
M_CNTRL_SIN
18
Itpd
Control Input. Connect to HSD V_CTRL pin.
M_STROBE
23
Ot2
Serial Frame Sync. Connect to HSD V_STROBE pin.
HSD INTERCONNECT
M_TXSIN
20
Itpd
Serial Transmit Data. Connect to HSD V_TXSIN pin.
M_RXOUT
22
Ot2
Serial Receive Data. Connect to HSD V_RXOUT pin.
TELEPHONE LINE (DAA)/AUDIO INTERFACE AND REFERENCE VOLTAGE
M_LINE_OUTP
9
O(DF)
Telephone Handset Out (TELOUT). Single-ended analog data output to the telephone
handset circuit. The output can drive a 300 Ω load.
M_LINE_IN
14
I(DA)
Telephone Handset Out (TELIN). Single-ended analog data input from the telephone
handset circuit.
M_MIC_IN
13
I(DA)
Microphone Input. Single-ended from the microphone circuit.
M_SPKR_OUT
3
O(DF)
Modem Speaker Analog Output. The M_SPKR_OUT analog output reflects the received
analog input signal. The M_SPKR_OUT on/off and three levels of attenuation are controlled
by bits in DSP RAM. When the speaker is turned off, the M_SPKR_OUT output is clamped
to the voltage at the VC pin. The M_SPKR_OUT output can drive an impedance as low as
300 ohms. In a typical application, the M_SPKR_OUT output is an input to an external
LM386 audio power amplifier.
VREF
11
REF
High Voltage Reference. Connect to VC through 10 µF and 0.1 µF (ceramic) in parallel.
Ensure a very close proximity between these capacitors and VREF pin.
VC
12
REF
Low Voltage Reference. Connect to analog ground through ferrite bead in series with a
parallel combination of 10 µF and 0.1 µF (ceramic). Ensure a very close proximity between
these capacitors and VC pin. Use a short path and a wide trace to AGND pin. Also connect
to handset interface circuit (VC_HAND) through a ferrite bead.
3-24
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
Table 3-8. CX20437 VC Pin Signal Definitions (Continued)
Label
Pin
I/O Type
Signal Name/Description
NOT USED
M_DIG_SPEAKER
2
Ot2
Not Used. Leave open.
M_LINE_OUTM
10
Oa
Not Used. Leave open.
M_RELAYA
24
Ot
Not Used. Leave open.
M_RELAYB
16
Ot
Not Used. Leave open.
M_MIC_BIAS
15
Oa
Not Used. Leave open.
M_ACT90
29
Itpu
Not Used. Leave open.
M_1BIT_OUT
30
Ot2
Not Used. Leave open.
D_LPBK_BAR
31
It
Not Used. Leave open.
NC
7, 8, 32
NC
Internal No Connect.
NOTES:
1. I/O types:
Ia
It
Itpd
Itpu
It/Ot2
Analog input
Digital input, TTL-compatible
Digital input, TTL-compatible, internal 75k ± 25k Ω pull-down
Digital input, TTL-compatible, internal 75k ± 25k Ω pull-up
Digital input, TTL-compatible/digital output, TTL-compatible, 2 mA, ZINTERNAL = 120 Ω
It/Ot12
Digital input, TTL-compatible/digital output, TTL-compatible, 12 mA, ZINTERNAL = 32 Ω
Oa
Ot2
Analog output
Digital output, TTL-compatible, 2 mA, ZINTERNAL = 120 Ω
Digital output, TTL-compatible, 12 mA, ZINTERNAL = 32 Ω
AGND
Analog Ground
GND
Digital Ground
See CX20437 VC Digital Electrical Characteristics (Table 3-9) and CX20437 VC Analog Electrical Characteristics (Table 3-10).
2. Interface Legend:
HSD
Host Side Device
Ot12
100553B
Conexant
3-25
SmartHSF Mobile Modem Data Sheet
Table 3-9. CX20437 VC Digital Electrical Characteristics
Parameter
Symbol
Min.
Typ.
Max.
Units
Input Voltage Low
VIN
-0.30
–
VDD+0.3
V
Input Voltage Low
VIL
VIH
-0.30
–
VDD+0.3
V
Input Voltage High
0.4*VDD
–
–
V
Output Voltage Low
VOL
0
–
0.4
V
Output Voltage High
VOH
0.8*VDD
–
VDD
V
–
–
-10
-10
–
–
10
10
µA
µA
Input Leakage Current
Output Leakage Current (High Impedance)
Test Conditions
Test conditions unless otherwise noted:
1. Test Conditions unless otherwise stated: VDD = +3.3 ± 0.3 VDC; TA = 0°C to 70°C; external load = 50 pF
Table 3-10. CX20437 VC Analog Electrical Characteristics
Signal Name
Type
M_LINE_IN (TELIN),
M_MIC_IN
I (DA)
M_LINE_OUTP (TELOUT)
O (DD)
M_SPKR_OUT
O (DF)
Characteristic
Input Impedance
AC Input Voltage Range
Reference Voltage
Minimum Load
Maximum Capacitive Load
Output Impedance
AC Output Voltage Range
Reference Voltage
DC Offset Voltage
Minimum Load
Maximum Capacitive Load
Output Impedance
AC Output Voltage Range
Reference Voltage
DC Offset Voltage
Value
> 70K Ω
1.1 VP-P
+1.35 VDC
300 Ω
0 µF
10 Ω
1.4 VP-P (with reference to ground and a 600 Ω load)
+1.35 VDC
± 200 mV
300 Ω
0.01 µF
10 Ω
1.4 VP-P
+1.35 VDC
± 20 mV
Test conditions unless otherwise noted:
1. Test Conditions unless otherwise stated: VDD = +3.3 ± 0.3 VDC; MAVDD = +3.3 ± 0.3 VDC, TA = 0°C to 70°C
Parameter
Min
Typ
Max
Units
dB
DAC to Line Driver output (600Ω load, 3dB in SCF and CTF) SNR/SDR at:
4Vp-p differential
2Vp-p differential
-10dBm differential
88/85
82/95
72/100
dB
DAC to Speaker Driver output (150Ω load, 3dB in SCF and CTF, -6dB in speaker driver)
SNR/SDR at:
2Vp-p
1Vp-p
-10dBm
Line Input to ADC (6dB in AAF) SNR/SDR at –10 dBm
Input Leakage Current (analog inputs)
-10
10
µA
Output Leakage Current (analog outputs)
-10
10
µA
3-26
Conexant
88/75
82/80
72/83
80/95
dB
100553B
SmartHSF Mobile Modem Data Sheet
3.4
ELECTRICAL ENVIRONMENTAL, AND TIMING SPECIFICATIONS
1.1.1
Operating Conditions, Absolute Maximum Ratings, and Power Requirements
The operating conditions are specified in Table 3-11.
The absolute maximum ratings are listed in Table 3-12.
The current and power requirements are listed in Table 3-13.
Table 3-11. Operating Conditions
Parameter
Supply Voltage
Operating Temperature Range
Symbol
Limits
Units
VDD
+3.0 to +3.6
VDC
TA
0 to +70
°C
Table 3-12. Absolute Maximum Ratings
Symbol
Limits
Units
Supply Voltage
Parameter
VDD
-0.5 to +4.0
VDC
Input Voltage
VIN
-0.5 to (VIO +0.5)*
VDC
TSTG
-55 to +125
°C
Analog Inputs
VIN
-0.3 to (MAVDD + 0.5)
VDC
Voltage Applied to Outputs in High Impedance (Off) State
VHZ
-0.5 to (VIO +0.5)*
VDC
DC Input Clamp Current
IIK
±20
mA
DC Output Clamp Current
IOK
±20
mA
Static Discharge Voltage (25°C)
VESD
±2500
VDC
Latch-up Current (25°C)
ITRIG
±400
mA
Storage Temperature Range
* VIO = +3.3V ± 0.3V or +5V ± 5%.
Caution: Handling CMOS Devices
These devices contain circuitry to protect the inputs against damage due to high static voltages. However, it is advised that
normal precautions be taken to avoid application of any voltage higher than maximum rated voltage.
An unterminated input can acquire unpredictable voltages through coupling with stray capacitance and internal cross talk.
Both power dissipation and device noise immunity degrades. Therefore, all inputs should be connected to an appropriate
supply voltage.
Input signals should never exceed the voltage range from 0.5V or more negative than GND to 0.5V or more positive than
VDD. This prevents forward biasing the input protection diodes and possibly entering a latch up mode due to high current
transients.
100553B
Conexant
3-27
SmartHSF Mobile Modem Data Sheet
Table 3-13. Current and Power Requirements
Conditions
Current
Power
CX11250 HSD + CX20463 LSD
Device State (Dx)
and Bus State (Bx)
PCI Bus
Power
PCI Clock
(PCICLK)
Line
Connection
Typical
Current (mA)
Maximum
Current (mA)
Typical
Power (mW)
Maximum
Power (mW)
D0, B0
On
Running
Yes
38.4
42.2
127
152
D0, B0
On
Running
No
10.4
11.4
34.3
41.0
D3, B0
On
Running
No
8.3
9.2
27.4
33.1
D3, B1
On
Running
No
8.3
9.2
27.4
33.1
D3, B2, B3 (D3hot)
On
Stopped
No
8.3
9.2
27.4
33.1
D3, B3 (D3cold)
Off
Stopped
No
2.4
2.7
7.9
9.7
NOTES:
Operating voltage: VDD = +3.3V ± 0.3V.
Test conditions: VDD = +3.3 VDC for typical values; VDD = +3.6 VDC for maximum values.
Definitions:
PCI Bus Power
On: PCI Bus +5V and +3.3V on (modem normally powered by +3.3V from PCI Bus +3.3V
or regulated down from PCI Bus +5V); PCIRST# not asserted.
Off: PCI Bus +5V and +3.3V off (modem normally powered by +3.3V from Vaux or Vpci); PCIRST# asserted.
Mini PCI Bus Power
On: PCI Bus +3.3V on (modem normally powered by +3.3V from PCI Bus +3.3V; PCIRST# not asserted.
Off: PCI Bus +3.3V off (modem normally powered by +3.3V from Vaux or Vpci); PCIRST# asserted.
PCI Clock (PCICLK)
Running: PCI Bus signal PCICLK running (PCI Bus and Mini PCI Bus only).
Stopped: PCI Bus signal PCICLK stopped (off) (PCI Bus and Mini PCI Bus only).
Line connection:
Yes: Off-hook, IA powered.
No: On-hook, IA powered down.
Device States:
D3: Low power state. Suspend state can change the system power state; the resulting power state depends
on the system architecture (OS, BIOS, hardware) and system configuration (i.e., other PCI installed cards).
D0: Full power state.
Device and Bus States: D0, B0:
Any PCI transaction, PCICLK running, VCC present.
D3, B1:
No PCI Bus transactions, PCICLK running, VCC present.
D3, B2, B3:
No PCI transactions, PCICLK stopped, VCC may be present.
D3, B3:
No PCI transactions, PCICLK stopped, no VCC.
Refer to the PCI Bus Power Management Interface Specification for additional information.
3-28
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
3.4.2
SERIAL EEPROM INTERFACE TIMING
The serial EEPROM interface timing is listed in Table 3-14 and is shown in Figure 3-7.
Table 3-14. Timing - Serial EEPROM Interface
Symbol
Parameter
Min
Typ.
Max
Units
tCSS
Chip select setup
200 (Note 1)
–
–
ns
tCSH
Chip select hold
500 (Note 1)
–
–
ns
tDIS
Data input setup
200 (Note 1)
–
–
ns
tDIH
Data input hold
1600
–
–
ns
tPD0
Data input delay
50
–
–
ns
tPD1
Data input delay
50
–
–
ns
tDF
Data input disable time
–
–
Note 2
ns
tSV
Status valid
–
–
Note 3
ns
tSKH
Clock high
900 (Note 1)
–
–
ns
tSKL
Clock low
900 (Note 1)
–
–
ns
–
Endurance
–
106
–
Cycles
Test Condition
NOTES:
1. Minimum times for HSD outputs when PCI clock = 33 MHz (times increase with decreasing PCI clock frequency).
2. No requirement.
3. Timing controlled by software for programming of EEPROM. No requirement for EEPROM read into HSD.
SROMCS (CS)
tCSS
tCSH
tSKH
tSKL
SROMCLK (SK)
tDIH
tDIS
SROMOUT (DI)
tPD0
tPD1
tDF
SROMIN (DO) (READ)
tDF
tSV
SROMIN (DO) (PROGRAM)
1219F3-7 WF-EEPROM
Figure 3-7. Waveforms - Serial EEPROM Interface
100553B
Conexant
3-29
SmartHSF Mobile Modem Data Sheet
4.
HOST SOFTWARE INTERFACE
4.1
PCI CONFIGURATION REGISTERS
The PCI Configuration registers are located in the HSD. Table 4-1 identifies the configuration register contents that are
supported in the HSD:
Table 4-1. PCI Configuration Registers
Bit
Offset
(Hex)
00
04
08
0C
10
14
18
1C
20
24
28
2C
30
34
38
3C
40
44
100553B
31:24
23:16
15:8
7:0
Device ID
Vendor ID
Status (see Table 4-2)
Command (see Table 4-3)
Class Code
Revision ID
Not Implemented
Header Type
Latency Timer
Not Implemented
Base Address 0 - Memory (HSD)
Base Address 1 – I/O (Dummy)
Unused Base Address Register
Unused Base Address Register
Unused Base Address Register
Unused Base Address Register
CIS Pointer (Not used)
Subsystem ID
Subsystem Vendor ID
Not Implemented
Reserved
Cap Ptr
Reserved
Max Latency
Min Grant
Interrupt Pin
Interrupt Line
Power Management Capabilities (PMC)
Next Item Ptr = 0
Capability ID =01h
(see Table 4-4)
Data
PMCSR_BSE = 0
Power Management
Bridge Support
Control/Status Register (PMCSR)
Extensions
(see Table 4-5)
Conexant
4-1
SmartHSF Mobile Modem Data Sheet
4.1.1
0x00 - Vendor ID Field
This 16-bit read-only field identifying the device manufacturer is loaded from the serial EEPROM after reset events. The value
is 14F1 for Conexant.
4.1.2
0x02 - Device ID Field
This 16-bit read-only field identifying the particular device is loaded from the serial EEPROM after reset events. The default
Device ID if serial EEPROM is not loaded is 0x1085.
4.1.3
0x04 - Command Register
Command Register
15 – 10
Reserved
9
r/w
8
r/w
7
0
6
r/w
5
0
4
0
3
0
2
r/w
1
R/w
0
r/w
r/w indicates the bit is read or write.
The Command Register bits are described in Table 4-2.
Table 4-2. Command Register
Bit
Description
0
Controls a device’s response to I/O Space accesses. A value of 0 disables the device response. A value
of 1 allows the device to respond to I/O Space accesses. The bit state is 0 after PCIRST# is deasserted.
Controls a device’s response to Memory Space accesses. A value of 0 disables the device response. A
value of 1 allows the device to respond to Memory Space accesses. The bit state is 0 after PCIRST# is
deasserted.
Controls a device’s ability to act as a master on the PCI Bus. A value of 0 disables the device from
generating PCI accesses. A value of 1 allows the device to behave as a bus master. The bit state is 0
after PCIRST# is deasserted.
Not Implemented.
This bit controls the device’s response to parity errors. When the bit is set, the device must take its
normal action when a parity error is detected. When the bit is 0, the device must ignore any parity errors
that it detects and continue normal operation. The bit state is 0 after PCIRST# is deasserted.
This bit is used to control whether or not a device does address/data stepping. This bit is read only from
the PCI interface. It is loaded from the serial EEROM after PCIRST# is deasserted.
This bit is an enable bit for the SERR# driver. A value of 0 disables the SERR# driver. A value of 1
enables the SERR# driver. The bit state is 0 after PCIRST# is deasserted.
This bit controls whether or not a master can do fast back-to-back transactions to different devices. A
value of 1 means the master is allowed to generate fast back-to-back transactions to different agents as
described in Section 3.4.2 of the PCI 2.1 specification. A value of 0 means fast back-to-back transactions
are only allowed to the same agent. The bit state is 0 after PCIRST# is deasserted.
Reserved
1
2
5-3
6
7
8
9
15-10
4-2
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
4.1.4
0x06 - Status Register
Status Register Bits
15
r/c
14
r/c
13
r/c
12
r/c
11
r/c
10 – 9
01
8
r/c
7
0
6
0
5
0
4
1
3-0
0000
r/c indicates the bit is readable and clearable (by writing a ‘1’ to corresponding bit position)
The Status Register bits are described in Table 4-3.
Status register bits may be cleared by writing a ‘1’ in the bit position corresponding to the bit position to be cleared. It is not
possible to set a status register bit by writing from the PCI Bus. Writing a ‘0’ has no effect in any bit position.
Table 4-3. Status Register
Bit
3-0
4
7-5
8
10-9
11
12
13
14
15
4.1.5
Description
Reserved
Extended capabilities = 1.
Not Implemented.
This bit is only implemented by bus masters. It is set when three conditions are met: 1) the bus agent
asserted PERR# itself or observed PERR# asserted; 2) the agent setting the bit acted as the bus master
for the operation in which the error occurred; and 3) the Parity Error Response bit (Command Register) is
set.
These bits encode the timing of DEVSEL#. 01 is supported corresponding to medium speed.
Signaled Target Abort. Not implemented.
Received Target Abort. This bit must be set by a master device whenever its transaction is terminated with
Target-Abort.
Received Master Abort. This bit must be set by a master device whenever its transaction (except for
Special Cycle) is terminated with Master-Abort.
Signaled System Error. This bit must be set whenever the device asserts SERR#.
Detected Parity Error. This bit must be set by the device whenever it detects a parity error, even if parity
error handling is disabled (as controlled by bit 6 in the Command register).
0x08 - Revision ID Field
This 8-bit read-only field identifying the device revision number is hardcoded in the device.
4.1.6
0x09 - Class Code Field
This 24-bit field, contains three 8-bit sub-fields. The upper byte is a base class code: 07 indicates a communications
controller. The middle byte is a sub-class code: 80 indicates “other” type of device. The lower byte is 00 which indicates no
register level programming defined. The value of the entire Class Code field is 0x078000.
4.1.7
0x0D - Latency Timer Register
The Latency Timer register specifies, in units of PCI Bus clocks, the value of the Latency Timer for this PCI Bus master. This
register has 5 read/write bits (MSBs) plus 3 bits of hardwired zero (LSBs). The Latency Timer Register is loaded into the PCI
Latency counter each time FRAME# is asserted to determine how long the master is allowed to retain control of the PCI Bus.
This register is loaded by system software. The default value for Latency Timer is 00.
4.1.8
0x0E - Header Type Field
Hardwired to 00.
4.1.9
0x28 - CIS Pointer Register
This register points to the CIS memory located in the HSD’s memory space.
4.1.10 0x2C - Subsystem Vendor ID Register
Subsystem Vendor ID register is supported. Loaded from the serial EEPROM after PCIRST# is deasserted.
100553B
Conexant
4-3
SmartHSF Mobile Modem Data Sheet
4.1.11 0x2E- Subsystem ID Register
Subsystem ID register is supported. Loaded from the serial EEPROM after PCIRST# is deasserted.
4.1.12 0x34 - Cap Ptr
Capabilities Pointer (CAP_PTR) at offset 0x34 containing hardcoded value 0x40.
4.1.13 0x3C - Interrupt Line Register
The Interrupt Line register is a read/write 8-bit register. POST software will write the value of this register as it initializes and
configures the system. The value in this register indicates which of the system interrupt controllers the device’s interrupt pin is
connected to.
4.1.14 0x3D - Interrupt Pin Register
The Interrupt Pin register tells which interrupt pin the device uses. The value of this register is 0x01, indicating that INTA# will
be used.
4.1.15 0x3E - Min Grant Register
The Min Grant register is used to specify the devices desired settings for Latency Timer values. The value specifies a period
of time in units of 0.25 microsecond. Min Grant is used for specifying the desired burst period assuming a 33 MHz clock. This
register is loaded from the serial EEPROM after PCIRST# is deasserted.
4.1.16 0x3F - Max Latency Register
The Max Latency register is used to specify the devices desired settings for Latency Timer values. The value specifies a
period of time in units of 0.25 microsecond. Min Latency specifies how often the device needs to gain access to the PCI Bus.
This register is loaded from the serial EEPROM after PCIRST# is deasserted.
4.1.17 0x40 - Capability Identifier
The Capability Identifier is set to 01h to indicate that the data structure currently being pointed to is the PCI Power
Management data structure.
4.1.18 0x41 - Next Item Pointer
The Next Item Pointer register describes the location of the next item in the function’s capability list. The value given is an
offset into the function’s PCI Configuration Space. The value of 00h indicates there are no additional items in the capabilities
list.
4-4
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
4.1.19 0x42 - PMC - Power Management Capabilities
The HSD contains power management as described in the PCI Power Management Specification, Revision 1.0 Draft, dated
Mar 18, 1997.
The HSD Configuration registers include the following Power Management features:
• Status register bit 4 set to 1 to indicate support for New Capabilities
• Capabilities Pointer (CAP_PTR) at offset 0x34 containing hardcoded value 0x40
• Power Management Register block at offset 0x40 and 0x44 (see Table 4-1)
The Power Management Capabilities register is a 16-bit read-only register which provides information on the capabilities of
the function related to power management (Table 4-4).
Table 4-4. Power Management Capabilities (PMC) Register
Bit
R/W
Description
2:0
R
Version. 010b indicates compliance with Revision 1.0 of the PCI Power Management Interface
Specification.
3
R
4
5
8:6
9
10
15:11
R
R
R
R
R
R
PME Clock. Hard coded to 0 to indicate that the PCI clock is not required for PME generation.
Reserved (= 0).
DSI (Device Specific Initialization). Loaded from serial EEPROM.
Aux. Current. Loaded from serial EEPROM.
D1_Support. When set to a 1, the HSD device supports D1 power state (loaded from serial EEPROM).
D2_ Support. When set to a 1, the HSD device supports D2 power state (loaded from serial EEPROM).
These 5 bits indicate which power states allow assertion of PME (loaded from serial EEPROM). A value of
0 for any bit indicates that the function cannot assert the PME# signal while in that power state.
Bit 11: 1 = PME# can be asserted from D0
Bit 12: 1 = PME# can be asserted from D1
Bit 13: 1 = PME# can be asserted from D2
Bit 14: 1 = PME# can be asserted from D3hot
Bit 15: 1 = PME# can be asserted from D3cold.
4.1.20 0x44 - PMCSR - Power Management Control/Status Register (Offset = 4)
This 16-bit register is used to manage the PCI function’s power management state as well as to enable/monitor power
management events (Table 4-5).
Table 4-5. Power Management Control/Status Register (PMCSR)
Bit
1:0
7:2
8
12:9
14:13
15:11
R/W
R/W
R
R/W
R/W
R
R/C
Description
Power State.
00 = D0
01 = D1
10 = D2
11 = D3.
Reserved (= 000000b).
PME_En. A 1 enables PME assertion.
Data_Select. Selects Data and Data Scale fields.
Data Scale. Associated with Data field. Loaded from serial EEPROM.
PME_Status. This bit is sticky when PME assertion from D3_cold is supported.
PME_Status = 1 indicates PME asserted by the HSD device. Writing 1 clears PME_Status. Writing 0 has
no effect.
R: Bit(s) is (are) read only.
R/W: Bit(s) is (are) readable and writeable.
R/C: Bit(s) is (are) readable, and clearable by writing 1 (bit may not be set by writing).
100553B
Conexant
4-5
SmartHSF Mobile Modem Data Sheet
4.1.21 0x46 - PMCSR_BSE - PMCSR PCI to PCI Bridge Support Extensions
PMCSR_BSE is cleared to 0 to indicate that bus power/clock control policies have been disabled.
4.1.22 0x47 - Data
This register is used to report the state dependent data requested by the Data_Select field. The value of this register is scaled
by the value reported by the Data_Scale field.
4.2
BASE ADDRESS REGISTER
HSD provides a single Base Address Register. The Base Address Register is a 32-bit register that is used to access the HSD
register set. Bits 3:0 are hard-wired to 0 to indicate memory space. Bits 15-4 will be hard-wired to 0. The remaining bits (31 16) will be read/write. This specifies that this device requires a 64k byte address space. After reset, the Base Address
Register contains 0x00000000.
The 64k byte address space used by the HSD is divided into 4k-byte regions. Each 4k-byte region is used as Table 4-6.
Table 4-6. HSD Address Map
Address
[15:12]
0x0
0x1
0x2
0x3
0x4
0x5-0xF
4-6
Address
[11:0]
0x0-0xfff
0x0-0xfff
0x0-0xfff
0x0-0xfff
0x0-0xfff
0x0-0xfff
Region Name
BASIC2 Registers
CIS Memory
DSP Scratch Pad
Reserved
Reserved
Reserved.
Description
Buffers, control, and status registers
Data loaded from Serial EEPROM for Card Bus applications
Access to DSP scratch pad registers
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
4.3
SERIAL EEPROM INTERFACE
The PCI Configuration Space Header and Power Management registers customizable fields are loaded from EEPROM during
Power On Reset and during D3 to D0 power transition soft reset. If the EEPROM is missing, default hard-coded values are
used. This section describes how the EEPROM content maps into the registers. The PCI Configuration Space Header and
Power Management information is used by the PC BIOS/Windows OS to find the driver for this board and also to find out the
extent PCI Power Management is typically supported on the modem board.
Obtain the appropriate EEPROM.TXT file (unique to each software configuration) from the local Conexant sales office.
4.3.1
Supported EEPROM Sizes
Two EEPROM sizes are supported: 256 by 16 bit (e.g., 93LC66B) as shown in Table 4-7 and 128 by 16 bit (e.g., 93LC56B)
as shown in Table 4-8. The difference is the 256-word version supports modem default country selection from the EEPROM
whereas the 128-word version does not.
The EEPROM text file used by the DOS4GW B2EPROM program utility lists the EEPROM content 8 bits per line in
hexadecimal format. The least significant 8 bits are listed first followed by the most significant 8 bits of the 16-bit word.
Table 4-7. EEPROM Content for 256 Words by 16 Bits per Word
Address
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
15
14
13
Don’t Care
D0C
D3_
Cold
D3_
Hot
0F-FE
FF
12
11
Max_Lat
PMC
bit 8
Sub-Class Code
10
9
8
7
Device ID
Vendor ID
Subsystem Device ID
Subsystem Vendor ID
PMC
bit 7
PMC
bit 6
6
5
4
3
2
1
0
Min_Gnt
Class Code
PME
DRV
Prog. I/F
CardBus CIS Pointer High (Not used, don’t care)
CardBus CIS Pointer Low (Not used, don’t care)
D1C
D2C
D3C
D0D
D3 power consumed
D1 power consumed
D3 power dissipated
D1 power dissipated
D2
D1
D0
D2_
D1_
DSI
State
State
Don’t Care
Don’t Care
D1D
D2D
D2 power consumed
D0 power consumed
D2 power dissipated
D0 power dissipated
Load CISRAM Count
D3D
Don’t Care
Don’t Care
Table 4-8. EEPROM Content for 128 Words by 16 Bits per Word
Address
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F-7F
100553B
15
14
13
Don’t Care
D0C
D3_
Cold
D3_
Hot
12
11
Max_Lat
PMC
bit 8
Sub-Class Code
10
9
8
7
Device ID
Vendor ID
Subsystem Device ID
Subsystem Vendor ID
PMC
bit 7
PMC
bit 6
PME
DRV
6
5
4
3
2
1
0
Min_Gnt
Class Code
Prog. I/F
CardBus CIS Pointer High (Not used, don’t care)
CardBus CIS Pointer Low (Not used, don’t care)
D1C
D2C
D3C
D0D
D1D
D2D
D3D
D3 power consumed
D2 power consumed
D1 power consumed
D0 power consumed
D3 power dissipated
D2 power dissipated
D1 power dissipated
D0 power dissipated
D2
D1
D0
D2_
D1_
DSI
Load CISRAM Count (Not Used, don’t care)
State
State
Don’t Care
Don’t Care
Conexant
4-7
SmartHSF Mobile Modem Data Sheet
4.3.2
Definitions
Device ID Register
This mandatory 16-bit register identifies the type of device and is assigned by Conexant. Valid values are:
Modem-Interface
Modem Part Number
Device ID
Comments
SmartHSF/MC-PCI
SmartHSF/MC-PCI
SmartHSF/MC-PCI
SmartHSF/MC-PCI
SmartHSF/MS-PCI
SmartHSF/MS-PCI
U.S./Japan/Canada Only
CX11250-11 + 20463-12
2493
CX11250-11 + 20463-12
2494
CX11250-11 + 20463-12
2193
CX11250-11 + 20463-12
2194
CX11250-11 + 20463-12 + 20437-11
2495
CX11250-11 + 20463-12 + 20437-11
2496
SmartHSF/MWC-PCI
SmartHSF/MWC-PCI
SmartHSF/MWC-PCI
SmartHSF/MWC-PCI
SmartHSF/MWS-PCI
SmartHSF/MWS-PCI
Worldwide including U.S./Japan/Canada
CX11250-11 + 20463-11
24A3
Data/Fax
CX11250-11 + 20463-11
24A4
Data/Fax/Remote TAM
CX11250-11 + 20463-11
21A3
Data/Fax/Cellular
CX11250-11 + 20463-11
21A4
Data/Fax/Remote TAM/Cellular
CX11250-11 + 20463-11 + 20437-11
24A5
Data/Fax/Voice/Speakerphone
CX11250-11 + 20463-11 + 20437-11
24A6
Full-Featured minus Handset
Data/Fax
Data/Fax/Remote TAM
Data/Fax/Cellular
Data/Fax/Remote TAM/Cellular
Data/Fax/Voice/Speakerphone
Full-Featured minus Handset
NOTE: The CX prefix may not be included in the part number for some devices. Also, the CX prefix may not appear in the part number as
branded on some devices.
Vendor ID Register
This mandatory 16-bit register identifies the manufacturer of the device. The value in this read-only register is assigned by a
central authority (i.e., the PCI SIG) that controls the issuance of the numbers. The value is 14F1 for Conexant.
Subsystem Vendor ID and Subsystem Device Register
The subsystem vendor ID is obtained from the SIG, while the vendor supplies its own subsystem device ID. These values are
supplied by OEM. Until these values are assigned, Conexant uses default values for Subsystem Vendor ID and Subsystem
Device ID which are the same as Vendor ID and Device ID, respectively.
A PCI functional device may be contained on a card or be embedded within a subsystem. Two cards or subsystems that use
the same PCI functional device core logic would have the same vendor and device IDs. These two optional registers are used
to uniquely identify the add-in card or subsystem that the functional device resides within. Software can then distinguish the
difference between cards or subsystems manufactured by different vendors but with the same PCI functional device on the
card or subsystem. A value of zero in these registers indicates that there isn’t a subsystem vendor and subsystem ID
associated with the device.
Min_Gnt Register
This register is assigned by Conexant. The value is 00.
This register is optional for a bus master and not applicable to non-master devices. This register indicates how long the
master would like to retain PCI Bus ownership whenever it initiates a transaction. The value hardwired into this register
indicates how long a burst period the device needs (in increments of 250 ns). A value of zero indicates the device has no
stringent requirements in this area. This information is useful in programming the algorithm to be used in the PCI Bus arbiter
(if it is programmable).
Max_Lat Register
This register is assigned by Conexant. The value is 00.
This register is optional for a bus master and not applicable to non-master devices. The specification states that this read-only
register specifies “how often” the device needs access to the PCI Bus (in increments of 250 ns). A value of zero indicates the
device has no stringent requirements for the data. This register could be used to determine the priority-level the bus arbiter
assigns to the master.
4-8
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
PMC [8:6] and PME DRV Type
These fields are assigned by Conexant.
PMC [8:6]: This 3- bit field reports the 3.3Vaux auxiliary current requirements for the PCI function. If the Data Register has
been implemented by this function then 1) reads of this field must return a value of “000b” 2) Data Register takes precedence
over this field for 3.3Vaux current requirements. If PME# generation from D3cold is not supported by the function
(PMC(15)=0), then this field must return a value of “000b” when read. The value is 000b.
PME DRV Type: This bit sets the driving capability of the PME pin (0 = active high TTL, 1 = active low Open Drain). The value
is 1.
Class Code Register (Class Code, Sub-class Code, Prog. I/F)
This register is always mandatory and is assigned by Conexant. The value is 07 for Class Code, 80 for Sub-class code, and
00 for Prog. I/F.
This register is a 24-bit read-only register divided into three sub-registers: base class, sub-class, and Prog. I/F (programming
interface). The register identifies the basic function of the device via the base class (i.e. for modems: Simple Communications
Controller), a more specific device sub-class (i.e. for modems: Other Communications Device), and in some cases a registerspecific programming interface (not used for modems).
CardBus CIS Pointer (CardBus CIS pointer High, CardBus CIS pointer Low) (Not Used)
This read-only register is not used.
Data Scale PMCSR[14:13] (D0C, D1C, D2C, D3C, D0D, D1D, D2D, D3D)
This value is supplied by the OEM since Conexant implements the Data Register. Until these values are assigned, Conexant
uses a default value 0000.
This field is required for any function that implements the Data Register. The data scale is a 2- bit read-only field which
indicates the scaling factor to be used when interpreting the value of the Data Register. The value and meaning of this field
will vary depending on which data value has been selected by the Data_Select field (PMCSR[12:09]). There are 4 data scales
to select 1) 0 = unknown 2) 1 = 0.1x, 3) 2 = 0.01x, 4) 3 = 0.001x where x is defined by the Data Select Field.
Data Register (D3, D2, D1, D0 power consumed and D3, D2, D1, D0 power dissipated)
This value is supplied by the OEM since Conexant implements the Data Register. Until these values are assigned, Conexant
uses a default value of 0000000000000000.
The Data Register is an optional, 8-bit read-only register that provides a mechanism for the function to report state dependent
operating data such as power consumed or heat dissipation. Typically the data returned through the Data register is a static
copy (look up table, for example) of the function’s worst case “DC characteristics” data sheet. This data, when made available
to system software could then be used to intelligently make decisions about power budgeting, cooling requirements, etc. The
data returned by the data register is selected by the Data Select field (PMCSR[12:09]).
Load CISRAM Count (CIS _SIZE) (Not Used)
This register is not used.
PMC[15:9, 5] (D3_Cold, D3_Hot, D2, D1, D0, D2_Support, D1_Support, DSI)
PMC[15:11]: PME_Support (D3_Cold, D3_Hot, D2, D1, D0)- This 5-bit field indicates the power states in which the function
may assert PME#. A value of 0b for any bit indicates that the function is not capable of asserting the PME# signal while in that
power state. D2 and D1 must be 0 since the modem does not support these states. The rest of the values are supplied by the
OEM and the values depend upon the systems in which the modem will be installed. Conexant uses a default value of 49.
This is for a system which does not support D3cold but supports D3hot.
When D3_Cold is a 1, PMC[15] is set to a 1 if VauxDET is high at device power on reset (POR) or is reset to a 0 if VauxDET
is low at POR. When D3_Cold is a 0, PMC[15] is always 0, regardless of the VauxDET level.
PMC[10] (D2_Support): If this bit is a 1 then function supports the D2 Power Management State. Currently the modems do
not support this state and therefore this field must be 0.
PMC[9] (D1_Support): If this bit is a 1 then function supports the D1 Power Management State. Currently the modems do not
support this state and therefore this field must be 0.
100553B
Conexant
4-9
SmartHSF Mobile Modem Data Sheet
DSI: The Device Specific Initialization bit indicates whether special initialization of this function is required (beyond the
standard PCI configuration header) before the generic class device driver is able to use it. This bit should always be set to “1”.
NOTE: For more information, refer to PCI Bus Power Management Interface Specification.
4-10
Conexant
100553B
SmartHSF Mobile Modem Data Sheet
5.
PACKAGE DIMENSIONS
The 100-pin TQFP package dimensions are shown in Figure 5-1.
The 32-pin TQFP package dimensions are shown in Figure 5-2.
16.00 ± 0.15
14.00 ± 0.05
12.00 REF
0.500 BSC
14.00 ± 0.05
13.87 ± 0.05
16.00 ± 0.15
14.00 ± 0.05
12.00 REF
PIN 1
REF
0.22 ± 0.05
13.87 ± 0.05
DETAIL A
14.00 ± 0.05
0.50 REF
1.00 ± .05
0.14 ± .03
0.60
+0.15, -0.10
0.10 ± .05
COPLANARITY = 0.08 MAX.
Ref. 100-PIN TQFP (GP00-D530)
1.00 REF
DETAIL A
PD-TQFP-100-D530 (032699)
Figure 5-1. Package Dimensions - 100-Pin TQFP
100553B
Conexant
5-1
SmartHSF Mobile Modem Data Sheet
D
D1
D2
PIN 1
REF
D
D1
D1 D2
b
e
DETAIL A
Dim.
A
A1
D1
A2
D
D1
A
A2
Inches*
Max.
Min.
Millimeters
Max.
Min.
1.6 MAX
0.0630 MAX
0.15
0.05
1.4 REF
0.0020
9.25
8.75
7.0 REF
0.3445
0.0059
0.0551 REF
0.3642
0.2756 REF
D2
5.6 REF
L
0.0197 0.0295
L1
0.75
0.5
1.0 REF
e
0.80 BSC
0.0315 BSC
0.2205 REF
0.0394 REF
b
0.30
0.40
0.0118
0.0157
c
0.19
0.13
0.10 MAX
0.0051
0.0075
Coplanarity
0.004 MAX
Ref: 32-PIN TQFP (GP00-D262)
c
A1
L
* Metric values (millimeters) should be used for
PCB layout. English values (inches) are
converted from metric values and may include
round-off errors.
L1
DETAIL A
PD-TQFP-32 (040395)
Figure 5-2. Package Dimensions - 32-pin TQFP
5-2
Conexant
100553B
NOTES
0.0 Sales Offices
Further Information
[email protected]
(800) 854-8099 (North America)
(949) 483-6996 (International)
Printed in USA
World Headquarters
Conexant Systems, Inc.
4311 Jamboree Road
Newport Beach, CA
92660-3007
Phone: (949) 483-4600
Fax 1: (949) 483-4078
Fax 2: (949) 483-4391
Europe North – England
Phone: +44 1344 486444
Fax:
+44 1344 486555
Europe – Israel/Greece
Phone: +972 9 9524000
Fax:
+972 9 9573732
Europe South – France
Phone: +33 1 41 44 36 51
Fax:
+33 1 41 44 36 90
Europe Mediterranean – Italy
Phone: +39 02 93179911
Fax:
+39 02 93179913
Americas
U.S. Northwest/
Pacific Northwest – Santa Clara
Phone: (408) 249-9696
Fax:
(408) 249-7113
U.S. Southwest – Los Angeles
Phone: (805) 376-0559
Fax:
(805) 376-8180
Europe – Sweden
Phone: +46 (0) 8 5091 4319
Fax:
+46 (0) 8 590 041 10
Europe – Finland
Phone: +358 (0) 9 85 666 435
Fax:
+358 (0) 9 85 666 220
Asia – Pacific
U.S. Southwest – Orange County
Phone: (949) 483-9119
Fax:
(949) 483-9090
Taiwan
Phone: (886-2) 2-720-0282
Fax:
(886-2) 2-757-6760
U.S. Southwest – San Diego
Phone: (858) 713-3374
Fax:
(858) 713-4001
Australia
Phone: (61-2) 9869 4088
Fax:
(61-2) 9869 4077
U.S. North Central – Illinois
Phone: (630) 773-3454
Fax:
(630) 773-3907
China – Central
Phone: 86-21-6361-2515
Fax:
86-21-6361-2516
U.S. South Central – Texas
Phone: (972) 733-0723
Fax:
(972) 407-0639
China – South
Phone: (852) 2 827-0181
Fax:
(852) 2 827-6488
U.S. Northeast – Massachusetts
Phone: (978) 367-3200
Fax:
(978) 256-6868
China – South (Satellite)
Phone: (86) 755-5182495
U.S. Southeast – North Carolina
Phone: (919) 858-9110
Fax:
(919) 858-8669
U.S. Southeast – Florida/
South America
Phone: (727) 799-8406
Fax:
(727) 799-8306
U.S. Mid-Atlantic – Pennsylvania
Phone: (215) 244-6784
Fax:
(215) 244-9292
Canada – Ontario
Phone: (613) 271-2358
Fax:
(613) 271-2359
China – North
Phone: (86-10) 8529-9777
Fax:
(86-10) 8529-9778
India
Phone: (91-11) 692-4789
Fax:
(91-11) 692-4712
Korea
Phone: (82-2) 565-2880
Fax:
(82-2) 565-1440
Korea (Satellite)
Phone: (82-53) 745-2880
Fax:
(82-53) 745-1440
Singapore
Phone: (65) 737 7355
Fax:
(65) 737 9077
Europe
Europe Central – Germany
Phone: +49 89 829-1320
Fax:
+49 89 834-2734
Japan
Phone: (81-3) 5371 1520
Fax:
(81-3) 5371 1501
www.conexant.com