MODEM LSI Overview Applications The MMD5020CAA1Modem LSI contains DSP core, program memory and work memory and performs digital data process of Fax modem and audio signal with AFE (Analog Front End) or Silicon DAA (Direct Access Arrangement) device. 1. Secure high quality transmission based on Panafax performance - V.34/33.6kbps Super G3 Fax - High Quality Audio signal processing function (Voice codec, Digital echo canceller, etc) MFP, Fax machines, PC-Fax Card, etc. Specifications Item 2. Selectable system interface. - Parallel interface or Serial interface (UART) - AT Command* is supported in case of Serial interface ・ AT Command (FAX Class1) ・ Automatic baud rate detection *Requires external ROM Fax Modem function Audio signal processing function Voice data multi-pass function Hands-free communication function (via digital echo canceller) Tonal/DTMF signal processing function Wave form codec function Voice codec function MPC, G.711, G.726 (16, 24, 32kbps) 1. Parallel interface MODEM MODE DSP PLL DPRAM ROM UART RAM DAA Line 2. AT Command interface Host Command : Type3 interface Interface : Parallel interface DPRAM (Dual Port RAM) MODEM MODE DSP System interface PLL DPRAM ROM UART RAM DAA Line Command : AT Command interface (Fax class1) Interface : UART (Standard serial interface) - Automatic baud rate function - Data transfer speed : 460kbps(max) AFE (Analog Front End) : 73M1903 (MAXIM) Applicable AFE/DAA ROM※ Package Outline Function V.34 (33600bps,2wire type, Half duplex) V.17 (14400bps,2wire type, Half duplex) V.29 ( 9600bps,2wire type, Half duplex) V.27ter ( 4800bps,2wire type, Half duplex) V.23 ( 1200bps,2wire type, Half duplex) V.21ch2 ( 300bps,2wire type, Half duplex) Bell202 ( 1200bps,2wire type, Half duplex) V.8 Procedure DTMF signal detect function DTMF signal transmit function Tonal signal tranmit function Call ID transfer function Programmable transmit level HDLC Framing Automatic Applicable Line Equalizer Block Diagram Host MMD5020CAA1 Silicon DAA : Si3056/Si3044 (Silicon Laboratories) Clock frequency Input clock frequency : 24.576MHz Internal clock frequency : 65.536MHz Power supply +3.3V, +1.8V Operating Temperature -40∼85℃ Package QFP 100pin, Pin pitch 0.5㎜ Design and specifications are each subject to change without notice. Please ask for the latest Product Standards to guarantee the satisfaction of your product requirements. No reproduction or republication without written permission. Panasonic System Networks Co., Ltd. http://industrial.panasonic.com As of Oct, 2013