D Series (Standard D-Sub) Dual Port Solder Dip Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Operating Temp. Range: Part Number (Details) 5,000MW min. 1,000 V AC 10mW max. 5A –55°C to +105°C D DP - 01 * * 1 Series Connector Version: DP = Dual Port Materials and Finish No. of Contacts (Top / Bottom): 01 = 9 / 9 02 = 15 / 15 03 = 25 / 25 10 = 37 / 37 Shell: Steel, Tin plated Insulator: Polyester Resin (glass filled) Fiber reinforced, UL94V-0 Contacts: Stamped Copper Alloy Plating: Gold over Nickel Conector Types (Top / Bottom): 1 = Male / Male 2 = Male / Female 3 = Female / Male 4 = Female / Female Vertical Distance between Connectors: S = 15.88mm, M = 19.05mm, L = 22.86mm Applicable Dimensions (Reference Only) Assembly: 1 = Snap-in + 4-40 Clinch Nut (Standard) 2 = 4-40 Threaded Outline Connector Dimensions Recommended PCB Layouts 33.24 Top View 1.1 ±0.05 Trading Division 2.84 Part Number No. of Contacts DDP-01**1 9/9 DDP-02**1 15 / 15 25 / 25 DDP-03**1 DDP-10**1 37 / 37 8.00 1.38 4- 3.05 ±0.05 2.77 B Mating Face A B C Vertical Distances E F 30.81 39.14 53.04 69.32 24.99 33.32 47.04 63.50 16.33 24.66 38.38 54.84 Type S Type M Type L 15.88 19.05 22.86 28.42 31.60 35.41 SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE – DIMENSIONS IN MILLIMETER