Document 179-1 SMT Power Inductors – DO3316P Series • High energy storage and very low resistance • Most values available with 10% tolerance • High inductance values are perfect for EL driver applications. Designer’s Kit C378 contains 3 of each 20% part Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant gold over nickel over phos bronze. Other terminations available at additional cost. Weight 0.92 – 1.23 g Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000 per 13″ reel Plastic tape: 24 mm wide, 0.33 mm thick, 12 mm pocket spacing, 5.8 mm pocket depth PCB washing Only pure water or alcohol recommended DCRSRF Part L2 Percentmax typ4 Isat5 Irms6 number1 (µH) tol3 (Ohms)(MHz) (A) (A) DO3316P-102ML_1.020 0.009100 9.0 6.8 DO3316P-152ML_1.520 0.010 90 8.06.4 DO3316P-222_L_2.2 20,100.012 80 7.0 6.1 DO3316P-332_L_3.3 20,100.015 65 6.4 5.4 DO3316P-472_L_4.7 20,100.018 45 5.4 4.8 DO3316P-682_L_6.8 20,100.027 38 4.6 4.4 DO3316P-103_L_10 20,100.038 30 3.8 3.9 DO3316P-153_L_15 20,100.046 27 3.0 3.1 DO3316P-223_L_22 20,100.085 19 2.3 2.7 DO3316P-333_L_33 20,100.10 15 2.0 2.1 DO3316P-473_L_47 20,100.14 12 1.6 1.8 DO3316P-683_L_68 20,100.20 10 1.4 1.5 DO3316P-104_L_100 20,100.28 9 1.2 1.3 DO3316P-154_L_150 20,100.40 6 1.0 1.0 DO3316P-224_L_220 20,10 0.61 5 0.800.80 DO3316P-334_L_330 20,10 1.02 4.50.600.60 DO3316P-474_L_470 20,10 1.27 3.50.500.50 DO3316P-684_L_680 20,10 2.02 2.50.400.40 DO3316P-105_L_1000 20,10 3.00 2.00.300.30 DO3316P-155_L_1500 20,10 4.49 1.70.290.27 DO3316P-335_L_3300 20,10 8.97 1.10.190.17 1. When ordering, specify tolerance, termination and packaging codes: DO3316P-105MLD Tolerance: M= 20%, K = 10% (Table shows stock tolerances in bold.) Termination:L=RoHS compliant gold over nickel over phos bronze. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:D =13″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. Tolerances in bold are stocked for immediate shipment. 4. SRF >13 MHz measured using Agilent/HP 8753D network analyzer; <13 MHz using Agilent/HP 4192A. 5. DC current at which inductance drops 10% (typ) from its value without current. 6. Current that causes a 40°C temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 179-1 Revised 09/25/12 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information. Document 179-2 SMT Power Inductors – DO3316P Series Typical L vs Current Typical L vs Frequency 10000 10000 1000 µH 100 µH 100 10 µH 10 1 µH 1 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 100 µH 100 10 µH 10 1 µH 1 0.1 0.1 0.01 1 0.1 10 Frequency (MHz) 0.1 Current Derating Current (A) 100 10 an additional 0.01/0,254 * inAllow length and 0.005/0,127 in 0.510 max* 12,95 120 110 0.125 ±0.010 3,18 ±0,254 height for optional tin-lead and tin-silver-copper application. 0.370max 9,40 100 90 0.145 ±0.010 3,69 ±0,254 80 70 0.330 8,38 dia 60 50 0.205 max * 5,21 40 30 20 10 0 25°C Percent of rated current 1 Isat Irms -40 -20 0 20 Recommended Land Pattern 0.100 2,54 40 60 80 100 0.115 2,92 0.110 2,79 120 140 Ambient temperature (°C) 0.100 2,54 0.405 10,29 0.300 7,62 Internal code XXX X Start Dash number Finish Part marking since Feb. 2005. Parts manufactured prior to that date may have color dots. Visit www.coilcraft.com/colrpowr.cfm for color dot marking details. Dimensions are in inches mm US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 179-2 Revised 09/25/12 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information.