LUXEON Rebel and LUXEON Rebel ES Color Portfolio Illuminating your creativity Technical Datasheet DS68 LUXEON® Rebel and LUXEON® Rebel ES Color Portfolio Introduction With leading light output, color stability, flux density, and clear saturated colors, the LUXEON® Rebel Color Portfolio of emitters is ideal for a wide variety of lighting, signaling, signage and entertainment applications. Every LUXEON Rebel Color Portfolio emitter has built-in quality, reliability, lumen maintenance and the ease of manufacturing needed to create a superior high quality light. Using the information in this document you can begin designing applications to your unique specifications. Use LUXEON Rebel Color Portfolio to • deliver more usable light and higher flux density • optimize applications to reduce size and cost • tightly pack the LEDs for color mixing • engineer more robust applications • utilize standard FR4 PCB technology • simplify manufacturing through the use of surface mount technology • recognized under the Component Recognition Program of Underwriters Laboratories Inc. UL listing E327436. Table of Contents General Product Information......................................................................................................................................3 Product Nomenclature........................................................................................................................................3 Average Lumen Maintenance Characteristics................................................................................................3 Environmental Compliance.................................................................................................................................3 Flux and Efficacy Performance Characteristics.......................................................................................................4 Flux Performance, Binning, and Supportability...............................................................................................5 Optical Characteristics.................................................................................................................................................6 Electrical Characteristics..............................................................................................................................................7 Absolute Maximum Ratings................................................................................................................................8 JEDEC Moisture Sensitivity.................................................................................................................................8 Reflow Soldering Characteristics...............................................................................................................................9 Mechanical Dimensions: LUXEON Rebel Color Emitter.................................................................................. 10 Mechanical Dimensions: LUXEON Rebel ES Royal-Blue Emitter.................................................................... 11 Pad Configuration....................................................................................................................................................... 12 Solder Pad Design.............................................................................................................................................. 12 Wavelength Characteristics...................................................................................................................................... 13 Typical Light Output Characteristics over Temperature.................................................................................... 14 Typical Forward Current Characterisics............................................................................................................... 15 Typical Relative Luminous Flux................................................................................................................................ 16 Current Derating Curves.......................................................................................................................................... 18 Typical Radiation Patterns......................................................................................................................................... 21 Typical Radiation Patterns......................................................................................................................................... 24 Typical Chromaticity Characteristics PC Amber................................................................................................. 25 Emitter Pocket Tape Packaging................................................................................................................................. 26 Emitter Reel Packaging.............................................................................................................................................. 27 Product Binning and Labeling................................................................................................................................... 28 Luminous Flux Bins..................................................................................................................................................... 29 Forward Voltage Bins.................................................................................................................................................. 30 Color Bins..................................................................................................................................................................... 31 Color Bins PC Amber....................................................................................................................................... 33 LUXEON Rebel Color Porfolio Datasheet DS68 20110819 2 General Product Information Product Nomenclature LUXEON Rebel color emitters are tested and binned at 350 mA with the exception of LUXEON Rebel ES royal-blue emitters which are tested and binned at 700 mA. The part number designation is explained as follows: L X M L -A B C D - E F G H L X M 2 -A B C D - E F G H L X M 3 -A B C D - E F G H Where: A — designates radiation pattern (value P for lambertian) B — designates color (see LUXEON Rebel color binning and labeling section) C — designates color variant (0 for color variants) D — designates test current (value 1 for 350 mA; 2 for 700 mA.) E — reserved for future product offerings FGH — minimum luminous flux (lm) or radiometric power (mW) performance Therefore products tested and binned at 350 mA or 700 mA follow the part numbering scheme: LXML-Px01-xxxx LXML-Px02-xxxx LXM2-Px01-xxxx LXM3-Px01-xxxx Average Lumen Maintenance Characteristics LUXEON Rebel color emitters are tested and binned at 350 mA and LUXEON Rebel ES royal-blue at 700 mA, with current pulse duration of 20 ms. All characteristic charts where the thermal pad is kept at constant temperature (25ºC typically) are measured with current pulse duration of 20 ms. Under these conditions, junction temperature and thermal pad temperature are the same. Philips Lumileds projects that green, cyan, blue and all royal-blue LUXEON Rebel color products will deliver, on average, 70% lumen maintenance (B50, L70) at 50,000 hours of operation at a forward current of 700 mA. This projection is based on constant current operation with junction temperature maintained at or below 135°C. Red, red-orange and amber LUXEON Rebel color products will also deliver, on average, 70% lumen maintenance (B50, L70) at 50,000 hours of operation at a forward current of 350 mA and is based on constant current operation with junction temperature maintained at or below 110°C. LUXEON Rebel PC amber delivers, on average, 70% lumen maintenance (L70) at 50,000 hours of operation at a forward current of up to 700 mA. This projection is based on constant current operation with junction temperature maintained at or below 130°C. This performance is based on independent test data, Philips Lumileds historical data from tests run on similar material systems, and internal LUXEON Rebel reliability testing. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance. Environmental Compliance Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel and LUXEON Rebel ES color products are compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely REACH and the RoHS directive. Philips Lumileds will not intentionally add the following restricted materials to the LUXEON Rebel Color Portfolio: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). LUXEON Rebel Color Porfolio Datasheet DS68 20110819 3 Flux and Efficacy Performance Characteristics Luminous Flux Characteristics for LUXEON Rebel Color Portfolio, Thermal Pad Temperature =25°C Table 1. Min Luminous Typ Efficacy Min Luminous Typ Luminous Typ Efficacy Flux (lm) Typ (lm/W) or Flux (lm) Flux (lm) or (lm/W) or Part or Radiometric Flux Radiant Efficacy or Radiometric Radiometric Radiant Efficacy Color Number Power (mW) for Royal-Blue Power (mW) Power (mW) for Royal-Blue and Deep Red and Deep Red Performance @ 350 mA Performance @ 700 mA Green Cyan LXML-PM01-0100 LXML-PM01-0090 LXML-PM01-0080 LXML-PM01-0070 LXML-PE01-0080 LXML-PE01-0070 100 90 80 70 80 70 Blue Royal-Blue Deep Red 102 95 88 79 83 76 100 93 86 78 81 75 LXML-PE01-0060 60 67 66 LXML-PB01-0040 40.0 41 38 LXML-PB01-0030 30.0 35 33 LXML-PB01-0023 23.528 26 LXML-PB01-0018 18.1 22 21 LXML-PR01-0500 500 mW 520 mW 48% LXML-PR01-0425 425 mW 480 mW 44% LXML-PR02-1100* 1100 mW * LXML-PR02-1050 1050 mW LXML-PR02-1000* 1000 mW LXML-PR02-0950* 950 mW * LXML-PR02-0900 900 mW LXML-PR02-0800* 800 mW LXM3-PD01-0350 350 mW 360 mW 46% LXM3-PD01-0300 300 mW 320 mW 41% LXM3-PD01-0260 260 mW 290 mW 37% LXM2-PD01-0050 50 53 72 LXM2-PD01-0040 40 48 65 Red LXML-PD01-0050 50 52 53 LXML-PD01-0040 40 46 47 LXML-PD01-0030 30 38 37 LXM2-PH01-007070 72 98 LXM2-PH01-0060 60 67 91 Red-Orange LXML-PH01-0060 60 62 63 LXML-PH01-0050 50 56 57 LXM2-PL01-009090 91 85 LXM2-PL01-0080 80 84 79 PC Amber LXM2-PL01-0070 70 78 73 LXM2-PL01-0060 60 69 65 LXML-PL01-0060 60 61 60 LXML-PL01-0050 50 54 51 Amber LXML-PL01-0040 40 48 46 LXML-PL01-0030 30 38 37 161 150 139 125 133 122 110 70 58 48 38 910 mW 840 mW 1120 mW 1070 mW 1030 mW 970 mW 940 mW 890 mW 720 mW 640 mW 580 mW 102 90 85 75 62 134 122 100 90 164 151 140 124 98 84 77 61 68 63 58 52 56 51 46 29 24 20 16 40% 37% 53% 51% 49% 46% 44% 42% 42% 38% 34% 63 56 35 30 24 83 76 40 35 73 68 63 55 39 33 30 24 * All LUXEON Rebel color emitters except royal-blue emitters are tested and binned for dominant wavelength. Royal-blue emitters are tested and binned using peak wavelength. LUXEON Rebel ES royal-blue emitters are tested and binned at 700 mA. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 4 Luminous Flux Characteristics for LUXEON Rebel Color Portfolio, Continued Notes for Table 1: 1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of ± 6.5% on flux and power measurements. 2. Typical luminous flux or radiometric power performance when device is operated within published operating conditions. Flux Performance, Binning, and Supportability Volume LEDs are produced with semiconductor technology that is subject to process variation, yielding a range of flux performance that is approximately Gaussian in nature. In order to provide customers with fine granularity within the overall flux distribution, Philips Lumileds separates LEDs into fixed, easy to design with, minimum luminous flux bins. To verify supportability of parts chosen for your application design, please consult your Philips Lumileds or Future Lighting Solutions sales representative. Luminous Flux Bins LUXEON Rebel Color Porfolio Datasheet DS68 20110819 5 Optical Characteristics LUXEON Rebel Color Portfolio at Test Current [1] Thermal Pad Temperature = 25°C Table 2. Typical Temperature Typical Coefficient of [2] Dominant Wavelength lD , Spectral Dominant or Peak Wavelength [3] lP Half-width[4] Wavelength (nm) (nm/°C) Color Min. Typ. Max. Dl1/2 DlD/ DTJ Typical Total Typical Included Viewing Angle [5]Angle [6] (degrees) (degrees) u0.90V2u 1/2 Green [7] 520.0 nm 530.0 nm 550.0 nm 30 0.05 160 125 [7] Cyan 490.0 nm 505.0 nm 520.0 nm 30 0.04 160 125 Blue [7] 460.0 nm 470.0 nm 490.0 nm 20 0.05 160 125 [3] [7] Royal-Blue 440.0 nm 447.5 nm 460.0 nm 20 0.04 160 125 Red [8] 620.0 nm 627.0 nm 645.0 nm 20 0.05 160 125 Deep Red [8] 650.0 nm 655.0 nm 670.0 nm 20 0.05 160 125 Red-Orange [8] 610.0 nm 617.0 nm 620.0 nm 20 0.08 160 125 Amber [8] 584.5 nm 590.0 nm 597.0 nm 20 0.10 160 125 PC Amber [7] 588.0 nm 591.0 nm 592.0 nm 80 0.10 160 120 Notes for Table 2: 1. LXML-PR01-XXXX, LXM2-PL01-XXXX and LXM3-PD01-XXXX emitters are tested at 350 mA, LXML-PR02-XXXX emitters are tested at 700 mA. 2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. Philips Lumileds maintains a tolerance of ± 0.5 nm for dominant wavelength measurements. 3. Royal-blue product is binned by radiometric power and peak wavelength rather than photometric lumens. Philips Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements. 4. Spectral width at ½ of the peak intensity. 5. Total angle at which 90% of total luminous flux is captured. 6. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. 7. PC amber, green, cyan, blue and royal-blue products are built with Indium Gallium Nitride (InGaN). 8. All red, deep red, red-orange, and amber are built with Aluminum Indium Gallium Phosphide (AlInGaP). LUXEON Rebel Color Porfolio Datasheet DS68 20110819 6 Electrical Characteristics Electrical Characteristics at 350 mA for LUXEON Rebel color, Thermal Pad Temperature = 25ºC Table 3. Typical Temperature Forward Voltage Vf [1] Coefficient of Forward Part (V)Voltage [2] (mV/°C) Color Number Min. Typ. Max. DVf / DTJ Typical Thermal Resistance Junction to Thermal Pad (°C/W) Ru J-C Green Cyan Blue LXML-PM01 LXML-PE01 LXML-PB01 2.55 2.55 2.55 2.90 2.90 3.03 3.51 3.51 3.51 - 2.0 to - 4.0 - 2.0 to - 4.0 - 2.0 to - 4.0 10 10 10 Royal-Blue Red Red Deep Red Red-Orange Red-Orange PC Amber Amber LXML-PR01 LXML-PD01 LXM2-PD01 LXM3-PD01 LXML-PH01 LXM2-PH01 LXM2-PL01 LXML-PH01 2.55 2.31 1.80 1.80 2.31 1.80 2.55 2.31 3.03 2.90 2.10 2.20 2.90 2.10 3.05 2.90 3.51 3.51 2.80 2.80 3.51 2.80 3.51 3.51 - 2.0 to - 4.0 - 2.0 to - 4.0 - 2.0 to - 4.0 - 2.0 to - 4.0 - 2.0 to - 4.0 - 2.0 to - 4.0 - 2.0 to - 4.0 - 2.0 to - 4.0 10 12 8 8 12 8 10 12 Electrical Characteristics at 700 mA for LUXEON Rebel ES Royal-Blue, Thermal Pad Temperature = 25°C Royal-Blue LXML-PR02 2.50 3.00 3.50 Notes for Table 3: 1. LUXEON Rebel ES royal-blue measured between 25°C = Tj = 110°C and If = 700 mA. 2. Measured between 25°C = TJ = 110°C at If = 350 mA. 3. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. - 2.0 to - 4.0 6 Typical Electrical Characteristics at 700 mA for LUXEON Rebel color, Thermal Pad Temperature = 25ºC Table 4. Color Part Number Typical Forward Voltage Vf (V) GreenLXML-PM01 Cyan LXML-PE01 Blue LXML-PB01 Royal-Blue LXML-PR02 Royal-Blue LXML-PR01 Red LXML-PD01 Red LXM2-PD01 Deep Red LXM3-PD01 Red-Orange LXML-PH01 Red-Orange LXM2-PH01 PC Amber LXM2-PL01 Amber LXML-PH01 LUXEON Rebel Color Porfolio Datasheet DS68 20110819 3.25 3.25 3.30 3.00 3.25 3.60 2.30 2.40 3.60 2.30 3.20 3.60 7 Absolute Maximum Ratings Table 5. Parameter Green/Cyan/ Blue/Royal-Blue LUXEON Rebel ES Royal-Blue Red/Deep-Red Red-Orange/Amber DC Forward Current (mA) 1000 1000 700 Peak Pulsed Forward 1000 1200 700 Current (mA) Average Forward Current (mA) 1000 1000 700 ESD Sensitivity < 8000V Human Body Model (HBM) Class 3A JESD22-A114-B PC Amber 700 700 700 LED Junction Temperature [1] 150°C 150°C135°C130°C Operating Case Temperature -40°C - 135°C -40°C - 135°C -40°C - 120°C -40°C - 110°C at 350 mA Storage Temperature -40°C - 135°C -40°C - 135°C -40°C - 135°C -40°C - 135°C Soldering Temperature JEDEC 020c 260°C JEDEC 020c 260°C JEDEC 020c 260°C JEDEC 020c 260°C Allowable Reflow Cycles 3 3 3 3 Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (Vr) LUXEON Rebel Color Portfolio LEDs are not designed to be driven in reverse bias. Notes for Table 5: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. The maximum rating for LUXEON Rebel ES royal-blue is 1200 mA with peak pulsed forward current not to exceed 60 seconds. JEDEC Moisture Sensitivity Table 6. Soak Requirements Level Floor Life Standard Time Conditions Time Conditions(hours) 1 unlimited [ 30°C / 85% RH LUXEON Rebel Color Porfolio Datasheet DS68 20110819 168 + 5 / -0 85°C / 85% RH 8 Reflow Soldering Characteristics JEDEC 020c Table 7. Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Lead Free Assembly 3°C / second max Preheat Temperature Min (Tsmin)150°C Preheat Temperature Max (Tsmax)200°C Preheat Time (tsmin to tsmax) 60 - 180 seconds Temperature TL (tL)217°C Time Maintained Above Temperature TL (tL) 60 - 150 seconds Peak / Classification Temperature (TP)260°C Time Within 5°C of Actual Peak Temperature (tP) 20 - 40 seconds Ramp-Down Rate 6°C / second max Time 25°C to Peak Temperature 8 minutes max Note for Table 7: - All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 9 Mechanical Dimensions: LUXEON Rebel Color Emitter 3.17 2.93 2.10 1.85 1.67 1.38 0.11 0.05 4.61 4.37 0.68 0.52 1.67 1.38 2.61 2.49 R 0.14 0.06 1.26 1.14 0.46 0.34 0.73 0.61 1.86 1.74 1.83 1.71 2.86 2.74 Figure 1. Package outline drawing. Notes for Figure 1: - To avoid damage, do not handle the device by the emitter lens. - Drawings not to scale. - All dimensions are in millimeters. - The thermal pad is electrically isolated from the anode and cathode contact pads. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 10 Mechanical Dimensions: LUXEON Rebel ES Royal-Blue Emitter 2.10 1.85 3.17 2.93 0.11 0.05 1.67 1.38 2.31 2.25 1.67 1.38 0.86 0.74 0.83 0.54 0.84 0.72 ∅ 0.68 0.52 0.88 0.72 0.14 R 0.06 2.61 2.49 0.21 R 0.09 1.26 1.14 4.61 4.37 0.14 R 0.06 0.46 0.34 0.73 0.61 1.86 1.74 1.83 1.71 2.86 2.74 Figure 2. Package outline drawing. Notes for Figure 2: - To avoid damage, do not handle the device by the emitter lens. - Drawings not to scale. - All dimensions are in millimeters. - The thermal pad is electrically isolated from the anode and cathode contact pads. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 11 Pad Configuration 3 1 3 2 TOP 2 1 BOTTOM PAD FUNCTION 1 CATHODE 2 ANODE 3 THERMAL Figure 3. Pad configuration. Note for Figure 3: - The thermal pad is electrically isolated from the anode and cathode contact pads. Solder Pad Design Figure 4. Solder pad layout. Notes for Figure 4: - The photograph shows the recommended LUXEON Rebel Color Portfolio layout on printed circuit board (PCB). This design easily achieves a thermal resistance of 7K/W. - Application Brief AB32 provides extensive details for this layout. The .dwg files are available at www.philipslumileds.com and www.philipslumileds.cn.com. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 12 Wavelength Characteristics Green, Cyan, Blue, all Royal-Blue, Red, Red-Orange and Amber at Test Current, Thermal Pad Temperature = 25°C Relative Spectral Power Distribution 1.0 0.8 0.6 Cyan Royal Blue RedOrange Green Blue Deep Red Amber 0.4 Red 0.2 0.0 400 500 450 600 550 650 700 Wavelength (nm) Figure 5. Relative intensity vs. wavelength. PC Amber at Test Current, Thermal Pad Temperature = 25°C Re elative Spectral Powe er Distributtion 1.0 0.8 06 0.6 04 0.4 02 0.2 00 0.0 460 510 560 610 660 710 760 Wavelength (nm) Figure 6. Relative intensity vs. wavelength. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 13 Typical Light Output Characteristics over Temperature Cyan, Blue and Royal-Blue and LUXEON Rebel ES Royal-Blue at Test Current 1.2 Relativ ve Luminous/Radiant Flux 1.1 1.0 0.9 0.8 Blue (LXML-PB01) Photometric 0.7 Green (LXML-PM01) & Cyan (LXMLPE01) Photometric ES Royal Blue (LXML-PR02) & Royal Blue (LXML-PR01) Radiometric 0.6 0.5 -20 0 20 40 60 80 100 120 140 Thermal Pad Temperature (°C) LXML-PR02 values are based on 700 mA drive current. * Figure 7. Relative light output vs. thermal pad temperature for cyan, blue, royal-blue and LUXEON Rebel ES royal-blue. Red, Deep Red, Red-Orange and Amber at Test Current 1.75 Red (LXML-PD01 & LXM2-PD01) Red-orange (LXML-PH01 & LXM2-PH01) 1.50 Relativ ve Luminous Flux Output Amber (LXML-PL01) PC Amber (LXM2-PL01) Deep Red (LXM3-PD01) 1.25 1.00 0.75 0.50 0.25 0.00 -20 0 20 40 60 80 100 Thermal Pad Temperature (°C) Figure 8. Relative light output vs. thermal pad temperature for red, deep red, red-orange and amber. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 14 Typical Forward Current Characterisics Green, Cyan, Blue, Royal-Blue and LUXEON Rebel ES Royal-Blue Thermal Pad Temperature = 25ºC 1600 LUXEON Rebel ES royal-blue LXML-PR02 1400 Green LXML-PM01, cyan LXML-PE01, & royal-blue LXML-PR01 Fo orward Current (mA) 1200 Blue LXML-PB01 1000 800 600 400 200 0 2.6 2.8 3 3.2 3.4 3.6 Forward Voltage (V) Figure 9. Forward current vs. forward voltage for green, cyan, blue and royal-blue. Red, Deep Red, Red-Orange, Amber and PC Amber Thermal Pad Temperature = 25ºC 1000 Red (LXM2-PD01) & Red Orange (LXM2PH01) Red (LXML-PD01), Red-orange (LXMLPH01) & Amber (LXML-PL01) PC Amber (LXM2-PL01) 900 Forrward Current (mA) 800 Deep Red (LXM3-PD01) 700 600 500 400 300 200 100 0 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 Forward Voltage (V) Figure 10. Forward current vs. forward voltage for red, deep red, red-orange, amber, and PC amber. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 15 Typical Relative Luminous Flux Typical Relative Luminous Flux vs. Forward Current for LUXEON Rebel ES Royal-Blue, Thermal Pad Temperature = 25ºC 2 1.8 Relative Radiant Flux 1.6 1.4 1.2 1 0.8 LUXEON Rebel ES royal-blue LXML-PR02 0.6 04 0.4 0.2 0 0 200 400 600 800 1000 1200 1400 1600 Forward Current (mA) Figure 11. Relative luminous flux or radiometric power vs. forward current for LUXEON Rebel ES royal-blue at Thermal Pad = 25ºC maintained. Typical Relative Luminous Flux vs. Forward Current for Green, Cyan, Blue and Royal-Blue, Thermal Pad Temperature = 25ºC 2.50 Normalized Luminous / Radiant Flux 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0 75 royal-blue LXML-PR01 radiometric 0.50 Blue photometric LXML-PB01 0.25 Green LXML-PM01 cyan LXML-PE01 photometric 0.00 0 200 400 600 800 1000 1200 Forward Current (mA) Figure 12. Relative luminous flux or radiometric power vs. forward current for green, cyan, blue and royal-blue at Thermal Pad = 25ºC maintained. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 16 Typical Relative Luminous Flux vs. Forward Current for Red, Deep Red, Red-Orange, Amber, Thermal Pad Temperature = 25ºC Normalized Lum minous Flux/Radiometric Power 2.00 1.75 1.50 1.25 1.00 0.75 Red (LXM2-PD01) & Red-orange (LXM2PH01) 0.50 Red (LXML-PD01), Red-orange (LXMLPH01) & Amber (LXML-PL01) Deep Red (LXM3-PD01) 0.25 0.00 0 100 200 300 400 500 600 700 800 Forward Current (mA) Figure 13. Relative luminous flux vs. forward current for red, deep red, red-orange and amber at Thermal Pad = 25ºC maintained. Typical Relative Luminous Flux, PC Amber Thermal Pad Temperature = 25ºC 2.00 1.75 Relatiive Luminious Flux 1.50 1.25 1.00 0.75 0.50 0.25 0.00 0 00 0 100 200 300 400 500 600 700 Forward Current (mA) Figure 14. Relative luminous flux vs. forward current for PC amber LXML-PL02 emitters. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 17 Current Derating Curves Current Derating Curve for 350 mA Drive Current for Red, Red-Orange, Amber 400 400 350 350 300 300 IF - Forward Current (mA) mA) IF - Forward ward Current (mA) Current Derating Curve for 350 mA Drive Current for Green, Cyan, Blue and Royal-Blue 250 15°C/W 200 25°C/W 150 35°C/W 100 45°C/W 250 15°C/W 200 25°C/W 150 35°C/W 100 45°C/W 50 50 0 0 0 25 50 75 100 125 150 175 0 25 TA - Ambient Temperature (°C) 50 75 100 125 TA - Ambient Temperature (°C) Figure 15. Maximum forward current vs. ambient temperature, Figure 16. Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC, red LXML-PD01, LXML-PB01 & royal-blue LXML-PR01 emitters. red-orange LXML-PH01 & amber LXML-PL01 emitters. Current Derating Curve for 350 mA Drive Current for Red, Deep-Red and Red-Orange Current Derating Curve for 350 mA Drive Current for PC Amber 400 400 350 350 ForwardCurrent Current (mA (mA) IIFF--Forward IF - Forw ward Current (mA) based on TJMAX = 150ºC, green LXML-PM01, cyan LXML-PE01, blue 300 250 15°C/W 200 25°C/W 35°C/W 35 C/W 150 150 45°C/W 100 300 250 15 o C/W 200 25 o C/W 35 o C/W 45 o C/W 150 100 Below recommended minimum DC Forward Current (100 mA) 50 50 0 0 25 50 75 100 125 TA - Ambient Temperature (°C) 150 0 20 40 60 80 100 120 140 - Ambient Temperature Co TT A A- Ambient Temperature ( C) Figure 17. Maximum forward current vs. ambient temperature, Figure 18. Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC, red LXM2-PD01, deep red LXM3-PD01 based on TJMAX = 130ºC, PC amber LXM2-PL01 emitters. & red-orange LXM2-PH01 emitters. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 18 Current Derating Curves Current Derating Curve for 700 mA Drive Current for LUXEON Rebel ES Royal-Blue 800 800 700 700 IF - Forward Current mA IF - Forward Current (mA) Current Derating Curve for 700 mA Drive Current for Green, Cyan, Blue and Royal-Blue 600 500 15°C/W 400 25°C/W 300 35°C/W 200 600 500 1 °C/W 15°C/W 400 25°C/W 300 35°C/W 200 100 100 0 0 0 25 50 75 100 125 150 0 175 25 50 75 100 125 150 175 TA - Ambient Temperature °C TA - Ambient Temperature (°C) Figure 19. Maximum forward current vs. ambient temperature, Figure 20. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC, green LXML-PM01, cyan LXML-PE01, blue based on TJMAX = 150ºC, royal-blue LXML-PR02 emitters. LXML-PB01 & royal-blue LXML-PR01 emitters.. Current Derating Curve for 700 mA Drive Current for Red, Deep Red and Red-Orange 800 800 700 700 600 600 IF - Foward Current (mA) IF - Forward Current (mA) mA) Current Derating Curve for 700 mA Drive Current for Red, Red-Orange, Amber 500 15°C/W 400 25°C/W 300 35°C/W 200 100 500 400 15°C/W 25°C/W 300 35°C/W 45°C/W 200 100 0 0 25 50 75 100 125 150 0 0 25 50 75 100 125 150 TA - Ambient Temperature (°C) TA - Ambient Temperature (°C) Figure 21. Maximum forward current vs. ambient temperature, Figure 22. Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC, red LXML-PD01, red-orange LXML-PH01 based on TJMAX = 135ºC, red LXM2-PD01, deep red LXM3-PD01 & amber LXML-PL01 emitters. & red-orange LXM2-PH01 emitters. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 19 Current Derating Curves Current Derating Curve for 700 mA Drive Current for PC Amber Current Derating Curve for 700 mA Drive Current 800 700 IF - Forward Current mA 600 500 15 o C/W 25 o C/W 400 35 o C/W 45 o C/W 300 200 100 Below recommended minimum DC Forward Current (100 mA) 0 20.00 40.00 60.00 80.00 100.00 120.00 140.00 TA - Ambient Temperature (oC) Figure 23. Maximum forward current vs. ambient temperature, based on TJMAX = 130ºC, PC amber LXM2-PL01 emitters. Current Derating Curve for 1000 mA Drive Current for LUXEON Rebel ES Royal-Blue 1200 1200 1000 1000 IF - Forward ard Current mA IF - Forward Current (mA) A) Current Derating Curve for 1000 mA Drive Current for Green, Cyan, Blue and Royal-Blue 800 600 15°C/W 400 25°C/W 200 800 600 15°C/W 400 25°C/W 200 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature (°C) 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature °C Figure 24. Maximum forward current vs. ambient temperature, Figure 25. Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC, green LXML-PM01, cyan LXML-PE01, blue based on TJMAX = 150ºC, royal-blue LXML-PR02 emitters. LXML-PB01 & royal-blue LXML-PR01. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 20 Typical Radiation Patterns Typical Spatial Radiation Pattern for Green, Cyan, Blue, Royal-Blue and LUXEON Rebel ES Royal-Blue Lambertian 100% 90% 80% Relative Inten nsity % 70% 60% 50% LUXEON Rebel ES royal-blue LXML-PR02 40% green LXML-PM01, cyan LXML-PE01, blue LXML-PB01 & royal-blue LXML-PR01 30% 20% 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement (deg) Figure 26. Typical spatial radiation pattern for green, cyan, blue, royal-blue and LUXEON Rebel ES royal-blue lambertian. Typical Polar Radiation Pattern for Green, Cyan, Blue, Royal-Blue and LUXEON Rebel ES Royal-Blue Lambertian 0° ‐30° 30° 60° ‐60° ‐1.0 ‐0.8 ‐0.6 ‐0.4 ‐0.2 0.0 0.2 0.4 0.6 0.8 1.0 LUXEON Rebel ES royal‐blue LXML‐PR02 green LXML‐PM01, cyan LXML‐PE01, blue LXML‐PB01 & royal‐blue LXML‐PR01 Figure 27. Typical polar radiation pattern for green, cyan, blue, royal-blue and LUXEON Rebel ES royal-blue lambertian. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 21 Typical Spatial Radiation Pattern for Red, Red-Orange and Amber Lambertian 100% 90% 80% Relative R Intensity % 70% 60% 50% 40% 30% red LXM2 -PD01 & red-orange LXM2-PH01 20% red LXML-PD01, red-orange LXML-PH01 & amber LXML-PL01 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement deg Figure 28. Typical spatial radiation pattern for red, red-orange and amber lambertian. Typical Polar Radiation Pattern for Red, Red-Orange and Amber Lambertian 0° ‐30° 30° 60° ‐60° ‐1.0 ‐0.8 ‐0.6 ‐0.4 ‐0.2 0.0 0.2 0.4 0.6 0.8 1.0 red LXM2‐PD01 & red‐orange LXM2‐PH01 red LXML‐PD01, red‐orange LXML‐PH01 & amber LXML‐PL01 Figure 29. Typical polar radiation pattern for red, red-orange and amber lambertian. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 22 Typical Spatial Radiation Pattern for Deep Red Lambertian 120% Relative In ntensity (% %) 100% 80% 60% 40% 20% Deep Red (LXM3-PD01) 0% -90 -60 -30 0 30 60 90 Angular Displacement (deg) Figure 30. Typical spatial radiation pattern for deep red lambertian. Typical Polar Radiation Pattern for Deep Red Lambertian 0° 100 30° -30° 80 60 -60° 60 60° 60 40 20 -90° 90° 0 Deep Red (LXM3-PD01) -120° -150° -150 120° 150° 150 180° Figure 31. Typical polar radiation pattern for deep red lambertian. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 23 Typical Radiation Patterns Typical Spatial Radiation Pattern PC Amber 1.2 1.0 Relative lative Intensity 0.8 0.6 0.4 0.2 0.0 -100 -80 -60 -40 -20 0 20 40 60 80 100 Angular Displacement (degrees) Figure 32. Typical representative spatial radiation pattern, PC amber LXM2-PL01 emitters. Typical Polar Radiation Pattern PC Amber Figure 33. Typical polar radiation pattern, PC amber LXM2-PL01 emitters. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 24 Typical Chromaticity Characteristics PC Amber Typical Chromaticity Characteristics over Temperature 0.010 0.008 0.006 0.004 x, x, y 0.002 0.000 Dx -0.002 Dy -0.004 -0.006 -0.008 -0.010 -40 -20 0 20 40 60 80 100 120 140 Forward Current (mA) Figure 34. Chromaticity coordinate vs. thermal pad temperature. Test current: 350 mA. Typical Chromaticity Characteristics over Forward Current Thermal Pad Temperature = 25 ºC 0.004 0.003 0 002 0.002 x, y 0.001 0.000 -0.001 Dx at 25C -0.002 Dy at 25C -0.003 -0.004 0 200 400 600 800 1000 1200 Forward Current (mA) Figure 35. Chromaticity coordinate vs. forward current. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 25 Emitter Pocket Tape Packaging 20 1000 50 Figure 36. Emitter pocket tape packaging. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 26 Emitter Reel Packaging Figure 37. Emitter reel packaging. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 27 Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (Vf). Decoding Product Bin Labeling LUXEON Rebel Color Portfolio emitters are labeled using a three or four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. Format of Labeling for Emitters Reels of green, cyan, blue, royal-blue, red, red-orange, amber and PC amber emitters are labeled with a three digit alphanumeric CAT code following the format below. ABC A = Flux bin (J, K, L, M etc.) B = Color bin (2, 4, 6 etc.) C = Vf bin (D, E, F, G etc.) LUXEON Rebel Color Porfolio Datasheet DS68 20110819 28 Luminous Flux Bins Tables 8, 9 and 10 list the standard photometric luminous flux/radiometric power bins for LUXEON Rebel and LUXEON Rebel ES color emitters (tested and binned at 350 mA and 700 mA respectively). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 8. Flux Bins All Colors (except Royal-Blue) Bin Code Minimum Flux (lm) D 18.1 E 23.5 F 30 G 40 H 50 J 60 K 70 L 80 M 90 N 100 P 120 Q 140 R 160 Maximum Flux (lm) 23.5 30 40 50 60 70 80 90 100 120 140 160 180 Table 9. LUXEON Rebel Royal-Blue and LUXEON Rebel ES Royal-Blue Bin Code Minimum Radiometric Flux (mW) Maximum Radiometric Flux (mW) D 350 425 E 425 500 F 500 600 G 600 700 H 700 800 J 800 900 K 900 950 Y 950 1000 A 1000 1050 B 1050 1100 M 1100 1200 Table 10. LUXEON Rebel Deep Red Bin Code Minimum Radiometric Flux (mW) Maximum Radiometric Flux (mW) C 260 300 D 300 350 E 350 400 LUXEON Rebel Color Porfolio Datasheet DS68 20110819 29 Forward Voltage Bins The following forward voltage bins include the minimum and maximum Vf bin values for the emitter. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Table 11. Applicable for LXML-PXX1 emitters tested at 350 mA. Vf Bins Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) A2.31 B2.55 C2.79 D3.03 E3.27 2.55 2.79 3.03 3.27 3.51 Table 12. Applicable for LXML-Pxx2 emitters tested at 700 mA. Minimum Forward Voltage Maximum Forward Voltage Bin Code (V) (V) P2.50 R2.75 S3.00 T3.25 2.75 3.00 3.25 3.50 Table 13. Applicable for LXM2-PXX1 and LXM3-PD01 (Deep Red) emitters tested at 350 mA. Bin Code Minimum Forward Voltage (V) V 1.80 W 2.00 X 2.20 Y 2.40 Z 2.60 LUXEON Rebel Color Porfolio Datasheet DS68 20110819 Maximum Forward Voltage (V) 2.00 2.20 2.40 2.60 2.80 30 Color Bins Green, cyan and blue LUXEON Rebel color emitters are tested and binned for dominant wavelength. Dominant Wavelength Bin Structure for Green Emitters Table 14. Bin Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 1 2 3 4 5 520 525 530 535 540 525 530 535 540 545 545 550 6 Dominant Wavelength Bin Structure for Cyan Emitters Table 15. Bin Code 1 2 3 4 5 6 Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 490 495 500 505 510 515 495 500 505 510 515 520 Dominant Wavelength Bin Structure for Blue Emitters Table 16. Bin Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 1 460 2 465 3 470 4 475 5 480 6 485 Royal-blue LUXEON Rebel and LUXEON Rebel ES emitters are tested and binned for peak wavelength. 465 470 475 480 485 490 Peak Wavelength Bin Structure for Royal-Blue and LUXEON Rebel ES Royal-Blue Emitters Table 17. Bin Code 3 4 5 6 LUXEON Rebel Color Porfolio Datasheet DS68 20110819 Minimum PeakWavelength (nm) Maximum Peak Wavelength (nm) 440 445 450 455 445 450 455 460 31 Red, deep red, red-orange and amber LUXEON Rebel color emitters are tested and binned for dominant wavelength. Dominant Wavelength Bin Structure for Red Emitters Table 18. Bin Code 4 5 Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 620.0 630.0 630.0 645.0 Dominant Wavelength Bin Structure for Red-Orange Emitters Table 19. Bin Code 2 Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 610.0 620.0 Dominant Wavelength Bin Structure for Amber Emitters Table 20. Bin Code 1 2 4 6 7 Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 584.5 587.0 589.5 592.0 594.5 587.0 589.5 592.0 594.5 597.0 Dominant Wavelength Bin Structure for Deep Red Emitters Table 21. Bin Code 6 7 LUXEON Rebel Color Porfolio Datasheet DS68 20110819 Minimum Dominant Wavelength (nm) 650 660 Maximum Dominant Wavelength (nm) 660 670 32 Table 22. PC Amber Bin Coordinates Bin Code x 2 4 y 0.56220.4372 0.55760.4326 0.57750.4132 0.58430.4151 0.57050.4111 0.57750.4132 0.55760.4326 0.54990.4249 Note for Table 22: - LUXEON Rebel PC amber emitters are tested and binned by x,y coordinates. Color Bins PC Amber 0.460 0.450 0.440 587.8nm 0.430 y 4 2 0.420 591.6nm 0.410 0.400 0.390 0.380 0.530 0.540 0.550 0.560 0.570 0.580 0.590 0.600 0.610 x Figure 38. Color bin structure. LUXEON Rebel Color Porfolio Datasheet DS68 20110819 33 Company Information Philips Lumileds is a leading provider of power LEDs for everyday lighting applications. The company’s records for light output, efficacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology and enabling lighting solutions that are more environmentally friendly, help reduce CO2 emissions and reduce the need for power plant expansion. Philips Lumileds LUXEON® LEDs are enabling never before possible applications in outdoor lighting, shop lighting, home lighting, digital imaging, display and automotive lighting. Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors, (Red, Green, Blue) and white. Philips Lumileds has R&D centers in San Jose, California and in the Netherlands, and production capabilities in San Jose, Singapore and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is dedicated to bridging the gap between solid-state technology and the lighting world. More information about the company’s LUXEON LED products and solid-state lighting technologies can be found at www.philipslumileds.com. www.philipslumileds.com www.philipslumileds.cn.com www.futurelightingsolutions.com For technical assistance or the location of your nearest sales office contact any of the following: North America: 1 888 589 3662 [email protected] ©2011 Philips Lumileds Lighting Company. All rights reserved. Product specifications are subject to change without notice. LUXEON is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. Europe: 00 800 443 88 873 [email protected] Asia Pacific: 800 5864 5337 [email protected] Japan: 800 5864 5337 [email protected]