MIL-DTL-38999 Connectors 181-001 Size 16 Fiber Optic Socket Terminus MIL-PRF-29504/5 181-001-126 K Product Series Basic Number Dash Number (Table I) K = Stainless Steel Alignment Sleeve (Omit for Ceramic Alignment Sleeve) .346 (8.8) .246 (6.7) o .082 (2.1) o .113 (2.9) PROTECTIVE COVER ALIGNMENT SLEEVE (Included with Terminus) Protective Cover Alignment Sleeve A Dia .110 (2.8) .092 (2.3) 1.132 (28.8) 1.025 (26.0) o .130 Max .537 (13.6) .069 (1.8) Dia .062 (1.6) Dia Shrink Tube .116 (3.0) .114 (2.9) Dia .500 (12.7) .080 (2.0) Max Dia. Cable Bottoming Surface See Note 5 APPLICATION NOTES 1. Assembly packaged in plactic bag and tag identified with manufacturer’s name and part number. 2. Material/ Finish: Ferrule, Alignment Sleeve: Zirconia Ceramic/N.A. or Stainless Steel/Passivate. Terminus Assembly: Stainless Steel/Passivate Spacer, Spring, and cover: Stainless Steel/Passivate Shrink Tube: Kynar/N.A 3. Alignment Sleeve & Protective Cover can also be ordered separately (Table II). 4. Metric dimensions (mm) are indicated in parentheses. © 2006 Glenair, Inc. 5. Threaded protective cover must be retained using Thread locker “Loctite 222” prior to insertion and fully seated against Terminus body as shown. See Assembly Procedure on page B-8 for complete termination instruction. 6. See 182-001S for Socket Terminus Polishing Tool. 7. Recommended insertion/removal tool: P/N: M81969/14-03 or equivalent 8. Consult factory for qualification status. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-2 www.glenair.com MIL-DTL-38999 Connectors 181-001 Size 16 Fiber Optic Socket Terminus MIL-PRF-29504/5 TABLE I: FIBER SIZE Assembly Dash Number Fiber Size Core/Cladding** A Dia. (Microns) Reference Only M29504/5-XXXX 181-001-125 9/125 (Singlemode) 125.5 M29504/5-4237* 181-001-126S 9/125 (Singlemode) 126 M29504/5-4238* 181-001-126 50/125 & 62.5/125 126 M29504/5-4239* 181-001-127 50/125 & 62.5/125 127 M29504/5-4046 181-001-142 100/140 142 M29504/5-4049 181-001-144 100/140 144 M29504/5-4050 181-001-145 100/140 145 181-001-156 62.5/125/155 (Polyimide) 156 M29504/5-4240* 181-001-157 62.5/125/155 (Polyimide) 157 M29504/5-4241* 181-001-173 100/140/172 (Polyimide) 173 M29504/5-4088 181-001-175 100/140/172 (Polyimide) 175 M29504/5-4242* 181-001-231 200/230 231 N/A 181-001-236 200/233 236 M29504/5-4243* 181-001-286 200/280 286 M29504/5-4244* 181-001-448 400/440 448 M29504/5-4245* 181-001-533 486/500 533 N/A N/A * See Note 8 ** Consult factory for termini which accomodate 600 micron and 1000 micron plastic or glass fiber. TABLE II: TERMINUS ACCESSORIES Assembly Dash Number © 2006 Glenair, Inc. Terminus Accessories 181-001-S Ceramic Alignment Sleeve 181-001-K Stainless Steel Alignment Sleeve 181-001-C Protective cover CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-3 www.glenair.com