E-Series RF 1:1 Transformer 1710 – 1910 MHz ETC1-1-10 V1 Features SM - 22 Package • 1:1 Impedance Ratio • Surface Mount • Tape and reel packaging available Description M/A-COM’s ETC1-1-10 is a 1:1 RF transmission line transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Parts are packaged in tape & reel. Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 1710 - 1910 MHz — — — Insertion Loss FL—fU 1710 - 1910 dB — — 2.0 Amplitude Unbalance — 1710 - 1910 dB — — 2.0 Phase Unbalance — 1710 - 1910 Degrees — — 10° Absolute Maximum Ratings 1 Ordering Information Parameter Absolute Maximum Part Number Package DC Power 250 mW ETC1-1-10TR Tape and Reel (2000 piece Reel) DC Current 30 mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C 1. Operation of this device above any one of these parameters may cause permanent damage. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. E-Series RF 1:1 Transformer 1710 – 1910 MHz Pin Configuration ETC1-1-10 V1 Schematic Pin No. Function 1 Secondary Dot 2 Not Connected 3 Secondary 4 Primary 5 Primary Dot Typical Performance Curves Insertion Loss Input Impedance Phase Unbalance Amplitude Unbalance 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.